0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Failure Modes and Resistance of Perforated Steel Rib Shear Connectors under Uplift Forces

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2019
Seite(n): 1-16
DOI: 10.1155/2019/9041376
Abstrakt:

In recent years, there is a rapid increase in the application of perforated steel rib shear connectors in steel and concrete composite structures. The connectors must not only ensure shear transfer but also sufficient uplift resistance. The shear behavior of connectors has been extensively investigated. However, studies on uplift resistance are lacking so far. Therefore, three push-out test specimens were tested to investigate the shear and tension behavior of perforated L-shaped and plain steel rib shear connectors. The failure modes of connectors were analyzed, and analytical models for the determination of uplift resistance were derived based on test results. The results showed that the ductility of perforated steel rib shear connectors under uplift force was smaller than that under shear force, and more severe concrete damage surrounding the rib and larger bending deformation of transverse steel bar was observed. The rib flange of L-shaped perforated rib has a significant contribution to the uplift resistance. It was suggested to increase the rib height of L-shaped rib to avoid the horizontal crack at the height of the rib flange. The validity of the proposed analytical models was confirmed by comparing the failure modes and capacities of specimens.

Copyright: © 2019 Xiaoqing Xu et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10310536
  • Veröffentlicht am:
    18.03.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine