• DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Teilen

Folgen

Mechanical behavior and analysis of composite bridges with corrugated steel webs: State-of-the-art

  1. Ahn, J. H., Choi, K. T., Jung, C. Y., Cho, K. I., and Kim, S. H. (2008). “Experimental evaluation on shear capacity of corrugated rib shear connection.” Proc. 4 th International Conference on Advances in Structural Engineering and Mechanics, Jeju, Korea, pp. 3384–3393.
  2. AASHTO (2004). AASHTD LRFD Bridge Design Specification, SI units, 3 rd edition. American Association of State Highway and Transportation Officials, Washington, D.C.
  3. Abbas, H. H. (2003). Analysis and design of corrugated web I-girders for bridges using high performance steel. Ph.D. Dissertation, Dept. of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, USA.
  4. Abbas, H. H., Sause, R., and Driver, R. G. (2006). “Behavior of corrugated web I-girders under in-plane loads.” Journal of Engineering Mechanics, ASCE, 132(8), pp. 806–814.

    https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(806)

  5. Abbas, Hassan H. / Sause, Richard / Driver, Robert G. (2007): Analysis of Flange Transverse Bending of Corrugated Web I-Girders under In-Plane Loads. In: Journal of Structural Engineering (ASCE), v. 133, n. 3 (März 2007), S. .

    https://doi.org/10.1061/(asce)0733-9445(2007)133:3(347)

  6. Abbas, Hassan H. / Sause, Richard / Driver, Robert G. (2007): Simplified analysis of flange transverse bending of corrugated web I-girders under in-plane moment and shear. In: Engineering Structures, v. 29, n. 11 (November 2007), S. .

    https://doi.org/10.1016/j.engstruct.2007.01.006

  7. Anami, K., Sause, R., and Abbas, H. H. (2005). “Fatigue of web-flange weld of corrugated web girders: 1. Influence of web corrugation geometry and flange geometry on web-flange weld toe stresses.” International Journal of Fatigue, 27(4), pp. 373–381.

    https://doi.org/10.1016/j.ijfatigue.2004.08.006

  8. Anami, K. and Sause, R. (2005). “Fatigue of web-flange weld of corrugated web girders: 2. Analytical evaluation of fatigue strength of corrugated web-flange weld.” International Journal of Fatigue, 27(4), pp. 383–393.

    https://doi.org/10.1016/j.ijfatigue.2004.08.007

  9. Aschinger, R. and Lindner, J. (1997). “Zu Besonderheiten bei Trapezsteg Trägern.” Stahlbau, 66(3), pp. 136–142 (in German).
  10. Bariant, J. F., Utsunomiya, T., and Watanabe, E. (2006). “Elasto-plastic analysis of PC girder with corrugated steel web by an efficient beam theory.” Structural Engineering & Earthquake Engineering, 23(2), pp. 257–268.

    https://doi.org/10.2208/jsceseee.23.257s

  11. Bergfelt, A. and Leiva-Aravena, L. (1984). Shear Buckling of Trapezoidal Corrugated Girder Webs. Publication S: 84(2), Division of Steel and Timber Structures, Chalmers University of Technology, Gothenburg, Sweden.
  12. Chan, C. L. / Khalid, Y. A. / Sahari, B. B. / Hamouda, A. M. S. (2002): Finite element analysis of corrugated web beams under bending. In: Journal of Constructional Steel Research, v. 58, n. 11 (November 2002), S. .

    https://doi.org/10.1016/s0143-974x(01)00075-x

  13. Chen, B. and Gao, J. (2008). “Experimental studies on concrete filled steel tubular beam with corrugated steel web under bending.” Journal of Building Structures, 1, pp. 75–82 (in Chinese).
  14. Chen, B. and Mou, T. (2008). “Research on concrete arches with steel webs.” Proc. Chinese-Croatian Joint Colloquium Long Arch Bridges, Brijuni Islands, pp.189–196.
  15. Chen, H., Liu, B., and Ren, H. (2007). “Research on dynamic characteristic of concrete box-girder with corrugated steel webs.” Journal of Highway and Transportation Research and Development, 2, pp. 80–83 (in Chinese).
  16. Cheyrezy, M. and Combault, J. (1990). “Composite bridges with corrugated steel webs: Achievements and prospects.” Proc. IABSE Symposium, Mixed Structures and New Materials, Brussels, pp. 479–484.
  17. Combault, J. (1988). “The Maupre Viaduct Near Charolles, France.” Proc. AISC Engineering Conference, 12, pp. 1–22.
  18. Di, J., Zhou, X., You, J., and Kong, X. (2009). “Torsional property of prestressed concrete composite beam with corrugated steel webs.” Journal of Chang’an University (Natural Science Edition), 3, pp. 58–63 (in Chinese).
  19. Ding, Y., Jiang, K., and Liu, Y. (2012). “Nonlinear analysis for PC box-girder with corrugated steel webs under pure torsion.” Thin-Walled Structures, 51, pp. 167–173.

    https://doi.org/10.1016/j.tws.2011.10.013

  20. Driver, Robert G. / Abbas, Hassan H. / Sause, Richard (2006): Shear Behavior of Corrugated Web Bridge Girders. In: Journal of Structural Engineering (ASCE), v. 132, n. 2 (Februar 2006), S. .

    https://doi.org/10.1061/(asce)0733-9445(2006)132:2(195)

  21. Easley, J. T. and McFarland, D. E. (1969). “Buckling of light-gage corrugated metal shear diaphragms.” Journal of the Structural Division, ASCE, 95(ST7), pp. 1497–516.
  22. Ebina, T., Kutsuna, Y., Wada, T., Tategami, H., and Sonoda, K. (2003). “Study on shear strength of corrugated steel web with flask shape-perfobond strip connections.” Proc. 5 th Symposium of Hybrid Structure, Japan, pp. 245–250 (in Japanese).
  23. Ebina, T., Higashida, N., Nakamura, H., Tategami, H., and Sonoda, K. (2004). “Study on out-plane bending behavior of corrugated steel web with twin-perfobond strip connections.” Journal of Structural Engineering, 50A, pp. 1191–1202 (in Japanese).
  24. Elgaaly, Mohamed / Hamilton, Robert W. / Seshadri, Anand (1996): Shear Strength of Beams with Corrugated Webs. In: Journal of Structural Engineering (ASCE), v. 122, n. 4 (April 1996), S. .

    https://doi.org/10.1061/(asce)0733-9445(1996)122:4(390)

  25. Elgaaly, Mohamed / Seshadri, Anand / Hamilton, Robert W. (1997): Bending Strength of Steel Beams with Corrugated Webs. In: Journal of Structural Engineering (ASCE), v. 123, n. 6 (Juni 1997), S. .

    https://doi.org/10.1061/(asce)0733-9445(1997)123:6(772)

  26. Elgaaly, Mohamed / Seshadri, Anand (1997): Girders with Corrugated Webs under Partial Compressive Edge Loading. In: Journal of Structural Engineering (ASCE), v. 123, n. 6 (Juni 1997), S. .

    https://doi.org/10.1061/(asce)0733-9445(1997)123:6(783)

  27. Elgaaly, M. and Seshadri, A. (1998). “Depicting the behavior of girders with corrugated webs up to failure using non-linear finite element analysis.” Advances in Engineering Software, 29, pp. 195–208.

    https://doi.org/10.1016/S0965-9978(98)00020-9

  28. Elgaaly, M., Seshadri, A., Rodriquez, R., and Ibrahim, S. (2000). “Bridge girders with corrugated webs.” Proc. 5 th International Bridge Engineering Conference, Transportation Research Record 1696, USA, Paper No. 5B0022, pp. 162–170.
  29. EN 1993-1-5 (2005). Eurocode 3: Design of steel structures, Part 1–5: Plated structural elements. European Committee for Standardization, Brussels.
  30. Fujioka, A. and Kakuta, T. (2006). “Application of the corrugated steel webs to PCT-girder bridge: Sou River Bridge.” Proc. 6 th Symposium of Hybrid Structure, Japan, pp. 1–8 (in Japanese).
  31. Gao, J. and Chen, B. (2008). “Experimental research on CFST model arch with corrugated steel web subjected to asymmetric load.” Proc. Chinese-Croatian Joint Colloquium, Long arch bridges, Brijuni Islands, pp. 401–408.
  32. GB 50017 (2003). Code for design of steel structures. China Architecture & Building Press, Beijing (in Chinese).
  33. Kazemi Nia Korrani, Hamid Reza (2010): Lateral bracing of I-girder with corrugated webs under uniform bending. In: Journal of Constructional Steel Research, v. 66, n. 12 (Dezember 2010), S. .

    https://doi.org/10.1016/j.jcsr.2010.06.003

  34. Harrison, J. D. (1965). “Exploratory fatigue test of two girders with corrugated webs.” British Welding Journal, 12(3), pp. 121–125.
  35. He, J., Chen, A., and Liu, Y. (2007a). “Analysis on structural system and mechanical behavior of box girder bridge with corrugated steel webs.” Proc. 3 rd International Conference on Steel and Composite Structures, UK, pp. 489–494.
  36. He, J., Liu, Y., and Chen, A. (2007b). “Structural analysis of prestressed composite box girder bridge with corrugated web.” Journal of Harbin Institute of Technology, 39(2), pp. 672–675 (in Chinese).
  37. He, J., Liu, Y., and Chen, A. (2008a). “Design outline and structural analysis of composite box girder bridge with corrugated webs.” Bridge Construction, 2, pp. 52–55 (in Chinese).
  38. He, J., Liu, Y., Chen, A., and Wu, J. (2008b). “Construction process simulation of a PC composite box-girder bridge by incremental launching the corrugated steel webs.” Proc. 18 th National Bridge Academic Conference, Tianjin, China, pp. 974–979 (in Chinese).
  39. He, J., Liu, Y., and Chen, A. (2008c). “Research on internal and external tendon system of composite box girder bridge with corrugated steel webs.” Journal of Highway and Transportation Research and Development, 6, pp. 65–70 (in Chinese).
  40. He, J., Liu, Y., and Chen, A. (2009a). “Elastic bending theory of composite bridge with corrugated steel web considering shear deformation.” Key Engineering Materials, 400–402, pp. 575–580.

    https://doi.org/10.4028/www.scientific.net/KEM.400-402.575

  41. He, J., Liu, Y., Chen, A., and Wang, Q. (2009b). “Deflection calculation of composite girder bridge with corrugated steel web with consideration of shear deformation.” Journal of Tongji University (Natural Science), 37(4), pp. 440–444 (in Chinese).
  42. He, J. (2011). Mechanical performance and design method of composite bridge with corrugated steel webs. Ph.D. Dissertation, Tongji University, Shanghai, China (in Chinese).
  43. He, Jun / Liu, Yuqing / Chen, Airong / Yoda, Teruhiko (2012): Shear behavior of partially encased composite I-girder with corrugated steel web: Experimental study. In: Journal of Constructional Steel Research, v. 77 (Oktober 2012), S. .

    https://doi.org/10.1016/j.jcsr.2012.05.005

  44. He, Jun / Liu, Yuqing / Lin, Zhaofei / Chen, Airong / Yoda, Teruhiko (2012): Shear behavior of partially encased composite I-girder with corrugated steel web: Numerical study. In: Journal of Constructional Steel Research, v. 79 (Dezember 2012), S. .

    https://doi.org/10.1016/j.jcsr.2012.07.018

  45. Hosaka, T., MItsugi, K., Hiragi, H. and Ushijima, H. (2002). “Study on shear strength and design method of perfobond strip.” Journal of Structural Engineering, 48A, pp. 1265–1272 (in Japanese).
  46. Huang, Ling / Hikosaka, Hiroshi / Komine, Keizo (2004): Simulation of accordion effect in corrugated steel web with concrete flanges. In: Computers & Structures, v. 82, n. 23-26 (September 2004), S. .

    https://doi.org/10.1016/j.compstruc.2003.07.010

  47. Ibrahim, S. A. (2001). Fatigue analysis and instability problems of plate girders corrugated webs. Ph.D. Dissertation, Department of Civil and Architectural Engineering, Drexel University, Philadelphia, PA, USA.
  48. Ibrahim, Sherif A. / El-Dakhakhni, Wael W. / Elgaaly, Mohamed (2006): Behavior of bridge girders with corrugated webs under monotonic and cyclic loading. In: Engineering Structures, v. 28, n. 14 (Dezember 2006), S. .

    https://doi.org/10.1016/j.engstruct.2006.03.026

  49. Ibrahim, Sherif A. / El-Dakhakhni, Wael W. / Elgaaly, Mohamed (2006): Fatigue of Corrugated-Web Plate Girders: Experimental Study. In: Journal of Structural Engineering (ASCE), v. 132, n. 9 (September 2006), S. .

    https://doi.org/10.1061/(asce)0733-9445(2006)132:9(1371)

  50. Ibrahim, Sherif A. / El-Dakhakhni, Wael W. / Elgaaly, Mohamed (2006): Fatigue of Corrugated-Web Plate Girders: Analytical Study. In: Journal of Structural Engineering (ASCE), v. 132, n. 9 (September 2006), S. .

    https://doi.org/10.1061/(asce)0733-9445(2006)132:9(1381)

  51. Johnson, R. P. / Cafolla, J. (1997): Local flange bucking in plate girders with corrugated webs. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 122, n. 2 (5 Januar 1997), S. .

    https://doi.org/10.1680/istbu.1997.29304

  52. JSCE (1998). Design manual for PC bridges with corrugated steel webs. Research committee for hybrid structures with corrugated steel webs, Japan Society of Civil Engineers, Japan.
  53. Jung, KwangHoe / Kim, KwangSoo / Sim, ChungWook / Kim, JangHo Jay (2011): Verification of Incremental Launching Construction Safety for the Ilsun Bridge, the World's Longest and Widest Prestressed Concrete Box Girder with Corrugated Steel Web Section. In: Journal of Bridge Engineering (ASCE), v. 16, n. 3 (Mai 2011), S. .

    https://doi.org/10.1061/(asce)be.1943-5592.0000165

  54. Kadotani, T., Aoki, K., and Yamanobe, S. (2003a). “Vibration characteristics of corrugated steel web bridge: 1. Test.” Journal of Prestressed Concrete, 45(2), pp. 90–99 (in Japanese).
  55. Kadotani, T., Aoki, K., and Yamanobe, S. (2003b). “Vibration characteristics of corrugated steel web bridge: 2. Analysis.” Journal of Prestressed Concrete, 45(3), pp. 35–43 (in Japanese).
  56. Kähönen, A. (1988). “On the introduction of individual loads into I-beams with trapezoidal profiled web plates.” Stahlbau, 57(8), pp. 250–252 (in German).
  57. Kato, H., Kawabata, A., and Nishimura, N. (2002). “Practical calculation formula on displacements and stress resultants of steel-concrete mixed girders with corrugated steel web.” Structural Engineering & Earthquake Engineering, 703(I-59), pp. 293–300 (in Japanese).
  58. Kato, H. and Nishimura, N. (2003). “Practical analysis of continuous girders and cable stayed bridges with corrugated steel web.” Structural Engineering & Earthquake Engineering, 731(I-63), pp. 231–245 (in Japanese).
  59. Kato, H., Sato, T., and Makiura, N. (2004). “Cross sectional distortion theory for PC box beams with corrugated steel web.” Journal of Japan Society of Civil Engineers, 766, pp. 109–127 (in Japanese).
  60. Khalid, Y. A., Chan, C. L., Sahari, B. B., and Hamouda, A. M. S. (2004). “Bending behaviour of corrugated web beams.” Journal of Materials Processing Technology, 150(3), pp. 242–254.

    https://doi.org/10.1016/j.jmatprotec.2004.02.042

  61. Kim, B. G., Wimer, M. R., and Sause, R. (2005). “Concretefilled rectangular tubular flange girders with flat or corrugated webs.” International Journal of Steel Structures, 5(4), pp. 337–348.
  62. Kim, K. S., Lee, D. H., Choi, S. M., Choi, Y. H., and Jung, S. H. (2011). “Flexural behavior of prestressed composite beams with corrugated web: part I. Development and analysis.” Composites: Part B, 42(6), pp. 1603–1616.

    https://doi.org/10.1016/j.compositesb.2011.04.020

  63. Kim, Sang-Hyo / Ahn, Jin-Hee / Choi, Kyu-Tae / Jung, Chi-Young (2011): Experimental Evaluation of the Shear Resistance of Corrugated Perfobond Rib Shear Connections. In: Advances in Structural Engineering, v. 14, n. 2 (April 2011), S. .

    https://doi.org/10.1260/1369-4332.14.2.249

  64. Kondo, M., Shimizu, Y., Kobayashi, K., and Hattori, M. (1994). “Design and construction of the Shinkai Bridge-Prestressed concrete bridge using corrugated steel webs.” Bridge and Foundation Engineering, 28, pp.13–20 (in Japanese).
  65. König, G. / Duda, H. / Zink, M. (1994): Neue Entwicklungen im Spannbetonbrückenbau. In: Beton- und Stahlbetonbau, v. 89, n. 4 (April 1994), S. .

    https://doi.org/10.1002/best.199400140

  66. Korashy, M. and Varga, J. (1979). “Comparative investigation of fatigue strength of beams with web plate stiffened in the traditional and by corrugation.” Acta Technica Academiae Scientiarum Hungaricae, 89, pp. 309–346.
  67. Kosa, K., Awane, S., Uchino, H., and Fujibayashi, K. (2006). “Ultimate behavior of prestressed concrete bridge with corrugated steel webs using embedded connection.” Journal of Japan Society of Civil Engineers, 62(1), pp. 202–220 (in Japanese).
  68. Kövesdi, B. (2010). Patch loading resistance of girders with corrugated webs. Ph.D. dissertation, Dept. of Structural Engineering, Budapest University of Technology and Economics, Hungary.
  69. Kövesdi, B. / Braun, B. / Kuhlmann, U. / Dunai, L. (2010): Patch loading resistance of girders with corrugated webs. In: Journal of Constructional Steel Research, v. 66, n. 12 (Dezember 2010), S. .

    https://doi.org/10.1016/j.jcsr.2010.05.011

  70. Kubo, M. and Watanabe, K. (2007). “Lateral-torstional buckling capacity of steel girders with corrugated web plates.” Journal of Japan Society of Civil Engineers, 63(1), pp. 179–197 (in Japanese).
  71. Leiva-Aravena, L. and Edlund, B. (1987). “Buckling of trapezoidally corrugated webs.” Proc. ECCS Colloquium on Stability of Plates and Shells, Belgium. pp. 107–116.
  72. Leiva-Aravena, L. (1987). Trapezoidally Corrugated Panels: Buckling Behaviour under Axial Compression and Shear. Publication S: 87(1), Division of Steel and Timber Structures, Chalmers University of Technology, Gothenburg, Sweden.
  73. Leonhardt, F. / Andrä, W. / Andrä, H.-P. / Harre, W. (1987): Neues, vorteilhaftes Verbundmittel für Stahlverbund-Tragwerke mit hoher Dauerfestigkeit. In: Beton- und Stahlbetonbau, v. 82, n. 12 (Dezember 1987), S. .

    https://doi.org/10.1002/best.198700500

  74. Li, H. (2003). Experimental study and analysis on torsion and distortion of box-girder with corrugated steel webs. Ph.D. Dissertation, Southeast University, Nanjing, China (in Chinese).
  75. Li, L., Wang, F., and Liu, Z. (2008). “Study on the creep behavior of externally prestressed composite beam with corrugated steel webs.” Journal of Hunan University (Natural Sciences), 5, pp. 1–5 (in Chinese).
  76. Li, L., Liu, Z., and Wang, F. (2009a). “Theoretical and experimental research on the flexural behavior of external prestressed composite beam with corrugated webs.” Engineering Mechanics, 7, pp. 89–96 (in Chinese).
  77. Li, L., Peng, K., and Wang, W. (2009b). “Theoretical and experimental study on shear lag effect of composite box girder with corrugated steel webs.” Journal of Highway and Transportation Research and Development, 4, pp. 78–83 (in Chinese).
  78. Li, S., Zhu, G., and Wan, S. (2009). “Static analysis of main bridge superstructure of a Yellow river bridge based on finite element method.” Journal of Highway and Transportation Research and Development, 4, pp. 42–46 (in Chinese).
  79. Liew, K. M., Peng, L. X., and Kitipornchai, S. (2007). “Nonlinear analysis of corrugated plates using a FSDT and a meshfree method.” Computer Methods in Applied Mechanics and Engineering, 196, pp. 2358–2376.

    https://doi.org/10.1016/j.cma.2006.11.018

  80. Lindner, J. and Aschinger, R. (1988). “Grenzschubtragfähigkeit von I-Tägern mit trapezförmig profilierten Stegen.” Stahlbau, 57(12), pp. 377–80 (in German).
  81. Lindner, J. and Aschinger, R. (1990). “Zur Torsionstegsteifigkeit von Trapezsteg Trägern.” Stahlbau, 59(4), pp. 113–120 (in German).
  82. Lindner, J. (1990). “Lateral torsional buckling of beams with trapezoidally webs.” Proc. International Colloquium of Stability of Steel Structures, Budapest, pp. 79–86.
  83. Lindner, J. (1992). “Zur Bemessung von Trapezsteg Trägern.” Stahlbau, 61(10), pp. 311–318 (in German).
  84. Liu, J., Harada, K., and Tajima, K. (2002). “Construction of prestressed concrete box-girder bridge with corrugated steel webs: Part1 of Nakano viaduct.” Proc. 1 st fib Congress, Osaka, Japan, pp. 315–322.
  85. Liu, Y. (2005a). Steel-concrete hybrid bridge. China Communication Press, Beijing (in Chinese).
  86. Liu, Y. (2005b). “Analysis of structural system of box girder bridge composited with corrugated steel webs.” Bridge Construction, 1, pp.1–4 (in Chinese).

    https://doi.org/10.1080/15732480412331309257

  87. Luo, R. and Edlund, B. (1994). “Buckling analysis of trapezoidally corrugated panels using spline finite strip method.” Thin-Walled Structures, 18(3), pp. 209–224.

    https://doi.org/10.1016/0263-8231(94)90019-1

  88. Luo, R. and Edlund, B. (1996a). “Shear capacity of plate girders with trapezoidally corrugated webs.” Thin-Walled Structures, 26(1), pp. 19–44.

    https://doi.org/10.1016/0263-8231(96)00006-7

  89. Luo, R. and Edlund, B. (1996b). “Ultimate strength of girders with trapezoidally corrugated webs under patch loading.” Thin-Walled Structures, 24(2), pp. 135–156.

    https://doi.org/10.1016/0263-8231(95)00029-1

  90. Machimdamrong, C., Watanabe, E., and Utsunomiya, T. (2002). “Global elastic shear buckling analysis of corrugated plates with edges elastically restrained against rotation.” Journal of Structural Engineering, 48A, pp. 51–58 (in Japanese).
  91. Machimdamrong, C., Watanabe, E., and Utsunomiya, T. (2004). “Analysis of corrugated steel web girders by an efficient beam bending theory.” Structural Engineering & Earthquake Engineering, 21(2), pp. 131–142 (in Japanese).

    https://doi.org/10.2208/jsceseee.21.131s

  92. Maeda, H., Sakai, H., and Komiya, M. (2003). “Study on creep analysis method of steel-concrete mixed girders with corrugated steel web.” Journal of Japan Society of Civil Engineers, 725, pp. 171–181 (in Japanese).
  93. Maeda, Y., Iijima, M., and Asai, H. (2005). “The extradose cable anchorage and ultimate behavior for extrdosed bridge with corrugated steel webs.” Journal of Japan Society of Civil Engineers, 794, pp. 227–238 (in Japanese).
  94. Mańko, Zbigniew / Beben, Damian (2008): Dynamic testing of a corrugated steel arch bridge. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 35, n. 3 (März 2008), S. .

    https://doi.org/10.1139/l07-098

  95. Meng, W., Wan, S., and Kuang, X. (2006). “Finite element analysis of the pre-stressed concrete box-girder footbridge with corrugated steel webs.” Journal of East China Jiaotong University, 2, pp. 12–14 (in Chinese).
  96. Metwally, A. E. (1998). Prestressed composite girders with corrugated steel webs. M.S. Thesis, Dept. of Civil Engineering, University of Calgary, Calgary, AB, Canada.
  97. El Metwally, A. / Loov, R. E. (2003): Corrugated steel webs for prestressed concrete girders. In: Materials and Structures, v. 36, n. 2 (März 2003), S. .

    https://doi.org/10.1007/bf02479526

  98. Mizuguchi, K., Ashizuka, K., Furuta, K., Ohura, T., Taki, K., and Kato, T. (1998). “Design and construction of the Hondani Bridge: PC bridge using corrugated steel webs.” Bridge and Foundation Engineering, 32, pp.2–9 (in Japanese).
  99. Mo, Y. L., Jeng, C. H., and Chang, Y. S. (2000). “Torsional behavior of prestressed concrete box-girder bridges with corrugated steel webs.” ACI Structural Journal, 97(6), pp. 849–859.
  100. Mo, Y. L. / Jeng, C.-H. / Krawinkler, H. (2003): Experimental and analytical studies of innovative prestressed concrete box-girder bridges. In: Materials and Structures, v. 36, n. 2 (März 2003), S. .

    https://doi.org/10.1007/bf02479523

  101. Mo, Y. L. / Fan, Yu-Lin (2006): Torsional Design of Hybrid Concrete Box Girders. In: Journal of Bridge Engineering (ASCE), v. 11, n. 3 (Mai 2006), S. .

    https://doi.org/10.1061/(asce)1084-0702(2006)11:3(329)

  102. Moon, Jiho / Yi, Jongwon / Choi, Byung H. / Lee, Hak-Eun (2009): Shear strength and design of trapezoidally corrugated steel webs. In: Journal of Constructional Steel Research, v. 65, n. 5 (Mai 2009), S. .

    https://doi.org/10.1016/j.jcsr.2008.07.018

  103. Moon, J., Yi, J., Choi, B. H., and Lee, H. E. (2009b). “Lateral-torsional buckling of I-girder with corrugated webs under uniform bending.” Thin-Walled Structures, 47(1), pp. 21–30.

    https://doi.org/10.1016/j.tws.2008.04.005

  104. Mori, T., Kamuki, M., and Tanaka, M. (2004). “Stress and fatigue properties of PC box section girder bridges with corrugated steel webs.” Journal of Structural Engineering, 50A, pp. 809–818 (in Japanese).
  105. Nakajima, Y., Yoda, T., and Ohura, T. (1995). “An experimental study of shear connectors between a corrugated steel web and a concrete flange.” Proc. 3 th Symposium of Hybrid Structure, Japan, pp. 173–177 (in Japanese).
  106. Nakasu, K., Yoda, T., and Sato, K. (2000). “Study on out-ofplane bending of concrete dowels in a composite girder with corrugated steel web.” Journal of Japan Society of Civil Engineers, 647(I-51), pp. 267–279 (in Japanese).
  107. Nguyen, Ngoc Duong / Kim, Sung Nam / Han, Seung-Ryong / Kang, Young-Jong (2010): Elastic lateral-torsional buckling strength of I-girder with trapezoidal web corrugations using a new warping constant under uniform moment. In: Engineering Structures, v. 32, n. 8 (August 2010), S. .

    https://doi.org/10.1016/j.engstruct.2010.03.018

  108. Nguyen, Ngoc Duong / Han, Seung-Ryong / Lee, Gyu-Sei / Kang, Young-Jong (2011): Moment modification factor of I-girder with trapezoidal-web-corrugations considering concentrated load height effects. In: Journal of Constructional Steel Research, v. 67, n. 11 (November 2011), S. .

    https://doi.org/10.1016/j.jcsr.2011.05.002

  109. Nguyen, N. D., Han, S. R., Kim, J. H., Kim, S. N., and Kang, Y. J. (2012). “Moment modification factors of Igirder with trapezoidal web corrugations under moment gradient.” Thin-Walled Structures, 57, pp. 1–12.

    https://doi.org/10.1016/j.tws.2012.03.016

  110. Noda, Y. and Ohtoi, K. (2000). “A calculation of sectional deformation for PC box girder bridge with steel web.” Journal of Japan Society of Civil Engineers, 641, pp. 29–37 (in Japanese).
  111. Novák, Balthasar / Denzer, Gundolf / Reichert, Frank (2007): Überprüfung des Tragverhaltens der Talbrücke Altwipfergrund. In: Bautechnik, v. 84, n. 5 (Mai 2007), S. .

    https://doi.org/10.1002/bate.200710026

  112. Novák, B. / Röhm, J. (2009): Anwendung von Trapezblechstegen im Brückenbau. In: Beton- und Stahlbetonbau, v. 104, n. 9 (September 2009), S. .

    https://doi.org/10.1002/best.200900685

  113. Oh, J. Y., Lee, D. H., and Kim, K. S. (2012). “Accordion effect of prestressed steel beams with corrugated webs.” Thin-Walled Structures, 57, pp. 49–61.

    https://doi.org/10.1016/j.tws.2012.04.005

  114. Okusumi, T. (2008). “Design and Construction of new structure type of composite box girder with corrugated steel web: Sugi Tanigawa Bridge.” EXTEC, 84, pp. 16–19 (in Japanese).
  115. Ono, K., Osada, K., Sakurada, M., and Ohura, T. (2006). “Corrosion characteristics of embedded connection for prestressed concrete bridges with corrugated steel webs.” Proc. 6 th Symposium of Hybrid Structure, Japan, pp. 29(1–6) (in Japanese).
  116. Otani, M. and Arai, T. (2006). Outline of Toyota-Arrows-Bridge. Technical Report of Kawada Construction Co. LTD., 25, pp. 48–53 (in Japanese).
  117. Peng, L. X., Liew, K. M., and Kitipornchai, S. (2007). “Analysis of stiffened corrugated plates based on the FSDT via the mesh-free method.” International Journal of Mechanical Sciences, 49(3), pp. 364–378.

    https://doi.org/10.1016/j.ijmecsci.2006.08.018

  118. Protte, W. (1993). “Zur Gurtbeulung eines Trägern mit Profiliertem Stegblech.” Stahlbau, 62(11), pp. 327–332 (in German).
  119. Rodriguez, R. (2000). Stress distribution and bearing stiffeners details related to fatigue and fracture of steel girders corrugated webs. Ph.D. Dissertation, Department of Civil and Architectural Engineering, Drexel University, Philadelphia, PA, USA.
  120. Röhm, J. / Novák, B. (2010): Querbiegetragverhalten von Betondübeln bei Verbundtragwerken mit Trapezblechstegen. In: Beton- und Stahlbetonbau, v. 105, n. 3 (März 2010), S. .

    https://doi.org/10.1002/best.200900068

  121. Sakai, I., Kasuga, A., Umezu, K., and Nagamoto, N. (2002). “Experimental research relating to fatigue of corrugated steel web bridges.” Proc. 1 st fib Congress, Osaka, Japan, pp. 277–284.
  122. Sause, Richard / Abbas, Hassan H. / Driver, Robert G. / Anami, Kengo / Fisher, John W. (2006): Fatigue Life of Girders with Trapezoidal Corrugated Webs. In: Journal of Structural Engineering (ASCE), v. 132, n. 7 (Juli 2006), S. .

    https://doi.org/10.1061/(asce)0733-9445(2006)132:7(1070)

  123. Sause, Richard / Kim, Bong-Gyun / Wimer, Mark R. (2008): Experimental Study of Tubular Flange Girders. In: Journal of Structural Engineering (ASCE), v. 134, n. 3 (März 2008), S. .

    https://doi.org/10.1061/(asce)0733-9445(2008)134:3(384)

  124. Sause, Richard / Braxtan, Thomas N. (2011): Shear strength of trapezoidal corrugated steel webs. In: Journal of Constructional Steel Research, v. 67, n. 2 (Februar 2011), S. .

    https://doi.org/10.1016/j.jcsr.2010.08.004

  125. Sayed-Ahmed, Ezzeldin Yazeed (2001): Behaviour of steel and (or) composite girders with corrugated steel webs. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 28, n. 4 (August 2001), S. .

    https://doi.org/10.1139/l01-027

  126. Sayed-Ahmed, E. Y. (2005): Lateral torsion-flexure buckling of corrugated web steel girders. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 158, n. 1 (Februar 2005), S. .

    https://doi.org/10.1680/stbu.2005.158.1.53

  127. Sayed-Ahmed, E. Y. (2007). “Design aspects of steel Igirders with corrugated steel webs.” Electronic Journal of Structural Engineering, 7, pp. 27–40.
  128. Shan, C. and Ling, Y. (2011). “Creep stress analysis of PC composite box girder bridge with corrugated steel webs.” Advanced Materials Research, 163–167, pp. 1987–1990.
  129. Shao, Xudong / Wang, Haolei / Zhao, Hua / Chang, Ying (2010): Experimental Study on Multicantilever Prestressed Composite Beams with Corrugated Steel Webs. In: Journal of Structural Engineering (ASCE), v. 136, n. 9 (September 2010), S. .

    https://doi.org/10.1061/(asce)st.1943-541x.0000204

  130. Shiji, A., Ooyama, H., and Yoda, T. (2008). “Experimental study on the new joint structures of a bridge with corrugated steel webs.” Journal of Structural Engineering, 54A, pp. 759–768 (in Japanese).
  131. Shimada, S. (1965). “Shear strength of steel plate girders with folded web plate (Ripple Web Girders).” Journal of Japan Society of Civil Engineers, 124, pp. 1–10 (in Japanese).

    https://doi.org/10.2208/jscej1949.1965.124_1

  132. Shirozu, A., Sano, Y., and Oshita, S. (2000). “A study of analytical method using’ the constant shear flow panels’ for composite bridges with corrugated steel webs.” Journal of Structural Engineering, 46A, pp. 1667–1674 (in Japanese).
  133. Shito, K., Kamihigashi, Y., and Suzuki, N. (2002). “Fatigue characteristics of connection between steel plates in a PC composite girder with corrugated steel webs under transverse loading.” Proc. 1 st fib Congress, Osaka, Japan, pp. 243–252.
  134. Shitou, K., Nakazono, A., Suzuki, N., Asai, N., and Asai, H. (2008). “Experimental research on shear behavior of corrugated steel web bridge.” Journal of Japan Society of Civil Engineers, 64(2), pp. 223–234 (in Japanese).
  135. Song, J. (2003). Mechanical performance of externally prestressed composite bridge with corrugated steel webs. Ph.D. Dissertation, Harbin Institute Technology, Harbin, China (in Chinese).
  136. Sugimoto, I., Murata, K., and Hiraoka, C. (2002). “An experimental study on fatigue durability of joint part under out-of-plane cyclic bending in corrugated steel web PC box railway bridge.” Journal of Structural Engineering, 48A, pp. 1339–1349 (in Japanese).
  137. SISC (1982). Swedish code for light-gauge metal structures. Swedish Institute of Steel Construction, Stockholm, Sweden.
  138. Taira, Y., Aoki, K., Hagiwara, N., Ito, A., and Hirose, T. (2009). “Connection joint between lower slab and corrugated steel webs applied to PC-box girder.” Journal of Structural Engineering, 55A, pp. 1066–1074 (in Japanese).
  139. Takaki, Y., Fujita, M., and Mashiko, H. (2004). “Vibration Characteristics of Extrodosed Brdiges with Corrugated Steel Webs.” Research Report of Sumitomo Mitsui Construction Co., LTD., pp. 53–58 (in Japanese).
  140. Takeshita, A., Yoda, T., and Sato, K. (2001). “Fatigue test of a composite girder with corrugated web.” Journal of Japan Society of Civil Engineers, 668, pp. 55–64 (in Japanese).
  141. Taniguchi, N. and Yoda, T. (1997). “Study on a simple method for bending analysis of composite girders with corrugated steel webs.” Journal of Japan Society of Civil Engineers, 577, pp. 107–120 (in Japanese).
  142. Tategami, H., Sugou, T., and Ebina, T. (1999). “Vibration of five span continuous PC box girder bridge with corrugated steel webs.” Journal of Structural Engineering, 45A, pp. 649–658 (in Japanese).
  143. Tezuka, T., Kobayashi, Y., Yasumori, H., and Fujita, T. (2002). “Structural characteristics of the PC box girder bridge (Shirasawa bridge) consisting of corrugated steel webs with horizontal curvature.” Proc. 1 st fib Congress, Osaka, Japan, pp. 309–314.
  144. Virlogeux, M. (1992). “Les Ponts Mixtes Associant l’Acier et le Beton Precontraint.” Bulletin Ponts Metalliques, 15, pp. 25–68 (in French).
  145. Wang, X. (2003). Behavior of steel members with trapezoidally corrugated webs and tubular flanges under static loading. Ph.D. Dissertation, Drexel University, Philadelphia, PA, USA.
  146. Watanabe, K. and Kubo, M. (2006). “In-plane bending capacity of steel girders with corrugated web plates.” Journal of Japan Society of Civil Engineers, 62(2), pp. 323–336 (in Japanese).
  147. Watanabe, K., Uchida, S., and Kubo, M. (2007). “Shear buckling capacity of steel girders with corrugated webs.” Journal of Structural Engineering, 53A, pp.13–24 (in Japanese).
  148. Watanabe, K. and Kubo, M. (2009). “Experimental study on shearing load carrying capacity of corrugated steel web girders under local heating.” Journal of Structural Engineering, 55A, pp. 124–133 (in Japanese).
  149. Wu, W. (2002). Research on shear-lag effect in combined box-girder with corrugated steel webs. Ph.D. Dissertation, Southeast University, Nanjing, China (in Chinese).
  150. Xie, X., Zhu, Y., Zhang, Z., and Huang, J. (2008). “Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs.” Journal of Zhejiang University (Engineering Science), 9, pp. 1506–1514 (in Chinese).
  151. Yamada, K., Kato, S., Okabe, A., Kim, L. T., and Ojio, T. (2001a). “Fatigue test of tensile plate with out-of-plane gussets inclined to applied stress.” Journal of Structural Engineering, 47A, pp. 1039–1045 (in Japanese).
  152. Yamada, K., Kim, L. T., and Ito, K. (2001b). “Fatigue behavior of inclined non-load-carrying fillet welded joints.” Journal of Japan Society of Civil Engineers, 682(I-56), pp. 383–390 (in Japanese).
  153. Yamada, S., Takamatsu, D., and Yamada, K. (2003). “Fatigue tests of groove welded joints in corrugated steel webs.” Journal of Japan Society of Civil Engineers, 724, pp.115–126 (in Japanese).
  154. Yamazaki, M. (2001). “Buckling strength of corrugated webs.” Journal of Structural Engineering, 47A, pp. 19–26 (in Japanese).
  155. Yasukawa, Y. (2003). “Plan and design of Ritto Bridge.” Proc. 5 th Japanese-German Joint Symposium on Steel and Composite Bridges, Osaka, Japan, pp. 143–148.
  156. Yasuzato, T., Higashida, N., Horiguchi, M., and Shiratani, H. (2005). “Development of launching nose with corrugated steel webs and ultra high strength fiber reinforced concrete: Torisaki River Bridge.” Proc. 6 th Symposium of Hybrid Structure, Japan, pp. 45 (1–8) (in Japanese).
  157. Yi, Jongwon / Gil, Heungbae / Youm, Kwangsoo / Lee, Hakeun (2008): Interactive shear buckling behavior of trapezoidally corrugated steel webs. In: Engineering Structures, v. 30, n. 6 (Juni 2008), S. .

    https://doi.org/10.1016/j.engstruct.2007.11.009

  158. Yoda, T. and Ohura, T. (1993). “Torsional behavior of composite PC box girders with corrugated steel webs.” Journal of Structural Engineering, 39A, pp. 1251–1258 (in Japanese).
  159. Yoda, T. and Shoda, Y. (1994). “Torsion and distortion of composite PC box girders with corrugated steel webs.” Journal of Structural Engineering, 40A, pp. 1381–1388 (in Japanese).
  160. Yoda, T., Tada, M., Nakajima, Y., and Ohuchi, K. (1994). “Experimental study on mechanical behavior of composite girders with corrugated steel webs.” Steel Construction Engineering, 1(2), pp. 57–66 (in Japanese).
  161. Yu, D. (2006). The lateral torsional buckling strength of steel I-girders with corrugated webs. Ph.D. Dissertation, Dept. of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, USA.
  162. Zeman (2003). Corrugated Web Beam. Technical Documentation, Zeman & Co., Vienna, Austria.
  163. Zhang, Y., Huang, P., Di, J., and Zhou, X. (2008). “Free vibration characteristics and experiment study of composite box girder with corrugated steel webs.” Journal of Traffic and Transportation Engineering, 5, pp. 76–80 (in Chinese).

Anzeige

  • Über diese
    Datenseite
  • Reference-ID
    10123513
  • Erstellt am
    10.12.2018
  • Geändert am
    10.12.2018