Construction and Building Materials - v. 25, n. 4 (April 2011)

Erschienen:	April 2011

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Kencanawati, Ni Nyoman / Shigeishi, Mitsuhiro	Acoustic emission sources of breakdown failure due to pulsed-electric discharge in concrete	1691-1698
Horpibulsuk, Suksun / Rachan, Runglawan / Suddeepong, Apichat	Assessment of strength development in blended cement admixed Bangkok clay	1521-1531
Corinaldesi, Valeria / Letelier, Viviana / Moriconi, Giacomo	Behaviour of beam–column joints made of recycled-aggregate concrete under cyclic loading	1877-1882
Silvestre, J. D. / de Brito, J.	Ceramic tiling in building façades: Inspection and pathological characterization using an expert system	1560-1571
Cevik, U. / Damla, N. / Van Grieken, R. / Akpınar, M. Vefa	Chemical composition of building materials used in Turkey	1546-1552
Jelle, Bjørn Petter / Nilsen, Tom-Nils	Comparison of accelerated climate ageing methods of polymer building materials by attenuated total reflectance Fourier transform infrared radiation spectroscopy	2122-2132
Riad, Mourad Y. / Shoukry, Samir N. / Sosa, Eduardo M. / William, Gergis W.	Concrete mix pouring sequence for uniform setting and curing of bridge decks	1653-1662
Lampropoulos, A. P. / Dritsos, S. E.	Concrete shrinkage effect on the behavior of RC columns under monotonic and cyclic loading	1596-1602
Yang, Jian / Du, Qiang / Bao, Yiwang	Concrete with recycled concrete aggregate and crushed clay bricks	1935-1945
Augenti, Nicola / Parisi, Fulvio	Constitutive modelling of tuff masonry in direct shear	1612-1620
Pliya, P. / Beaucour, A.-L. / Noumowe, A.	Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature	1926-1934
Nili, Mahmoud / Zaheri, M.	Deicer salt-scaling resistance of non-air-entrained roller-compacted concrete pavements	1671-1676
Mas, Ángeles / Gutiérrez, Javier / Gil, Enrique / Gil, Alba / Galvañ, Vicente	Design and construction recommendations to improve impermeability in rainscreen walls built with natural stone coverings	1753-1761
Suh, Young-chan / Cho, Nam-Hyun / Mun, Sungho	Development of mechanistic–empirical design method for an asphalt pavement rutting model using APT	1685-1690
Vázquez, María Auxiliadora / Galán, Emilio / Guerrero, María Angeles / Ortiz, Pilar	Digital image processing of weathered stone caused by efflorescences: A tool for mapping and evaluation of stone decay	1603-1611
Chen, Dar-Hao / Won, Moon / Hong, Feng	Dowel Bar Retrofit (DBR) performance in Texas	1762-1771
Najimi, M. / Sobhani, J. / Pourkhorshidi, A. R.	Durability of copper slag contained concrete exposed to sulfate attack	1895-1905
Darquennes, A. / Khokhar, M. I. A. / Rozière, E. / Loukili, A. / Grondin, F. / Staquet, S.	Early age deformations of concrete with high content of mineral additions	1836-1847
Liao, Yishun / Wei, Xiaosheng / Li, Guowei	Early hydration of calcium sulfoaluminate cement through electrical resistivity measurement and microstructure investigations	1572-1579
Karakurt, Cenk / Topçu, İlker Bekir	Effect of blended cements produced with natural zeolite and industrial by-products on alkali-silica reaction and sulfate resistance of concrete	1789-1795
Wang, Xiao-Hui / Gao, Xiang-Hua / Li, Bing / Deng, Bao-Ru	Effect of bond and corrosion within partial length on shear behaviour and load capacity of RC beam	1812-1823
Söylev, T. A.	The effect of fibers on the variation of bond between steel reinforcement and concrete with casting position	1736-1746
Sajedi, Fathollah / Razak, Hashim Abdul	Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars	2036-2045
Bai, Yu / Keller, Thomas	Effects of thermal loading history on structural adhesive modulus across glass transition	2162-2168
Lu, Feifei / Ayoub, Ashraf	Evaluation of debonding failure of reinforced concrete girders strengthened in flexure with FRP laminates using finite element modeling	1963-1979
Piattoni, Quintilio / Quagliarini, Enrico / Lenci, Stefano	Experimental analysis and modelling of the mechanical behaviour of earthen bricks	2067-2075
Franzoni, Elisa / Sandrolini, Franco / Bandini, Simone	An experimental fixture for continuous monitoring of electrical effects in moist masonry walls	2023-2029
Santilli, A. / Puente, I. / Tanco, M.	A factorial design study to determine the significant parameters of fresh concrete lateral pressure and initial rate of pressure decay	1946-1955
Nowamooz, H. / Chazallon, C.	Finite element modelling of a rammed earth wall	2112-2121
Amin, M. S. / Hashem, F. S.	Hydration characteristics of hydrothermal treated cement kiln dust–sludge–silica fume pastes	1870-1876
Fasana, Sara / Nelva, Riccardo	Improvement of the performance of traditional stone roofs by wind driven rain experimental tests	1491-1502
Billong, Ndigui / Melo, U. C. / Kamseu, E. / Kinuthia, J. M. / Njopwouo, D.	Improving hydraulic properties of lime–rice husk ash (RHA) binders with metakaolin (MK)	2157-2161
Luccioni, Bibiana / Rougier, Viviana C.	In-plane retrofitting of masonry panels with fibre reinforced composite materials	1772-1788
Ouyang, Dong / Xu, Weiting / Lo, Tommy Y. / Sham, Janet F. C.	Increasing mortar strength with the use of activated kaolin by-products from paper industry	1537-1545
Şahin, Yuşa / Köksal, Fuat	The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete	1801-1806
Pereira, A. / Palha, F. / de Brito, J. / Silvestre, J. D.	Inspection and diagnosis system for gypsum plasters in partition walls and ceilings	2146-2156
Tai Tan, Fu / Ma, Xiao Qian / Feng, Chao	Investigation on combustion of fire retardant board under different N2–O2 mixture gas atmospheres by using thermogravimetric analysis	2076-2084
Jeong, Kyu-Dong / Lee, Soon-Jae / Kim, Kwang W.	Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) film	1890-1894
Wen, Qing-Jie	Long-term effect analysis of prestressed concrete box-girder bridge widening	1580-1586
Cerni, G. / Cardone, F. / Colagrande, S.	Low-temperature tensile behaviour of asphalt binders: Application of loading time–temperature–conditioning time superposition principle	2133-2145
Anshari, B. / Guan, Z. W. / Kitamori, A. / Jung, K. / Hassel, I. / Komatsu, Kokei	Mechanical and moisture-dependent swelling properties of compressed Japanese cedar	1718-1725
Toniolo, L. / Paradisi, A. / Goidanich, S. / Pennati, G.	Mechanical behaviour of lime based mortars after surface consolidation	1553-1559
Mallat, Amjad / Alliche, Abdenour	Mechanical investigation of two fiber-reinforced repair mortars and the repaired system	1587-1595
Elsaid, A. / Dawood, M. / Seracino, R. / Bobko, C.	Mechanical properties of kenaf fiber reinforced concrete	1991-2001
Zhang, Mingzhong / Ye, Guang / Van Breugel, Klaas	Microstructure-based modeling of water diffusivity in cement paste	2046-2052
Won, Jong-Pil / Kim, Joon-Mo / Lee, Su-Jin / Lee, Sang-Woo / Park, Sung-Ki	Mix proportion of high-strength, roller-compacted, latex-modified rapid-set concrete for rapid road repair	1796-1800
de Moura, M. F. S. F. / Oliveira, J. M. Q. / Morais, J. J. L. / Dourado, N.	Mixed-mode (I+II) fracture characterization of wood bonded joints	1956-1962
Demir, Abdullah / Topçu, İlker Bekir / Kuşan, Hakan	Modeling of some properties of the crushed tile concretes exposed to elevated temperatures	1883-1889
Lee, Tzen-Chin / Chang, Chieh-Jen / Rao, Ming-Kang / Su, Xun-Wei	Modified MSWI ash-mix slag for use in cement concrete	1513-1520
Yildirim, Hasan / Sengul, Ozkan	Modulus of elasticity of substandard and normal concretes	1645-1652
Kyriazopoulos, A. / Anastasiadis, C. / Triantis, D. / Brown, C. J.	Non-destructive evaluation of cement-based materials from pressure-stimulated electrical emission – Preliminary results	1980-1990
Aggelis, D. G. / Tsimpris, N. / Chai, H. K. / Shiotani, T. / Kobayashi, Y.	Numerical simulation of elastic waves for visualization of defects	1503-1512
Shafigh, Payam / Jumaat, Mohd Zamin / Mahmud, Hilmi	Oil palm shell as a lightweight aggregate for production high strength lightweight concrete	1848-1853
Haidar, Murhaf / Ghorbel, Elhem / Toutanji, Houssam	Optimization of the formulation of micro-polymer concretes	1632-1644
Modarres, Amir / Nejad, Fereidoon Moghadas / Kavussi, Amir / Hassani, Abolfazl / Shabanzadeh, Ehsan	A parametric study on the laboratory fatigue characteristics of recycled mixes	2085-2093
Yun, Taeyoung / Lee, Oleg / Lee, Seung Woo / Kim, In Tai / Cho, Yoon-Ho	A performance evaluation method of preformed joint sealant: Slip-down failure	1677-1684
Pasquini, E. / Canestrari, F. / Cardone, F. / Santagata, F. A.	Performance evaluation of gap graded Asphalt Rubber mixtures	2014-2022
Bateni, Farshid / Ahmad, Fauziah / Yahya, Ahmad Shukri / Azmi, Mastura	Performance of oil palm empty fruit bunch fibres coated with acrylonitrile butadiene styrene	1824-1829
Pereira de Oliveira, Luiz A. / Castro-Gomes, João P.	Physical and mechanical behaviour of recycled PET fibre reinforced mortar	1712-1717
Yavuz, H. / Ozkahraman, T. / Demirdag, S.	Polishing experiments on surface quality of building stone tiles	1707-1711
Chernin, Leon / Val, Dimitri V.	Prediction of corrosion-induced cover cracking in reinforced concrete structures	1854-1869
Foti, Dora	Preliminary analysis of concrete reinforced with waste bottles PET fibers	1906-1915
Luo, Wen-qian / Chen, Jiu-cun	Preparation and properties of bitumen modified by EVA graft copolymer	1830-1835
Chen, Yongliang / Zhang, Yimin / Chen, Tiejun / Zhao, Yunliang / Bao, Shenxu	Preparation of eco-friendly construction bricks from hematite tailings	2107-2111
He, Zheng / Qiu, Feng	Probabilistic assessment on flexural capacity of GFRP-reinforced concrete beams designed by guideline ACI 440.1R-06	1663-1670
Geetha, S. / Ramamurthy, K.	Properties of sintered low calcium bottom ash aggregate with clay binders	2002-2013
Casas, Joan R.	Reliability-based assessment of masonry arch bridges	1621-1631
Siddique, Rafat / Aggarwal, Yogesh / Aggarwal, Paratibha / Kadri, El-Hadj / Bennacer, Rachid	Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS)	1916-1925
Turanlı, Lütfullah / Saritas, Afsin	Strengthening the structural behavior of adobe walls through the use of plaster reinforcement mesh	1747-1752
Van Tuan, Nguyen / Ye, Guang / Van Breugel, Klaas / Fraaij, Alex L. A. / Bui, Danh Dai	The study of using rice husk ash to produce ultra high performance concrete	2030-2035
Liu, Xiaoming / Wu, Shaopeng	Study on the graphite and carbon fiber modified asphalt concrete	1807-1811
Reza, Bahareh / Sadiq, Rehan / Hewage, Kasun	Sustainability assessment of flooring systems in the city of Tehran: An AHP-based life cycle analysis	2053-2066
Riveiro, B. / Morer, P. / Arias, P. / de Arteaga, I.	Terrestrial laser scanning and limit analysis of masonry arch bridges	1726-1735
Aflaki, Sassan / Memarzadeh, Milad	Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen	2094-2106
Chen, Mei-zhu / Lin, Jun-tao / Wu, Shao-peng / Liu, Cong-hui	Utilization of recycled brick powder as alternative filler in asphalt mixture	1532-1536
Liu, Zhenhong / Chen, Quanyuan / Xie, Xuebao / Xue, Gang / Du, Feifei / Ning, Qiuyan / Huang, Lu	Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks	1699-1706

Über diese
Datenseite
IssueID
22466
Veröffentlicht am:
16.12.2018
Geändert am:
16.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - v. 25, n. 4 (April 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 25, n. 4 (April 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.