Engineering Structures - März 2012

Erschienen:	März 2012

Autor(en)	Titel	Seite(n)
Lishak, Vadim I. / Yagust, Vladimir I. / Yankelevsky, David Z.	2-D Orthotropic failure criteria for masonry	360-371
Shakeri, Kazem / Tarbali, Karim / Mohebbi, Mohtasham	An adaptive modal pushover procedure for asymmetric-plan buildings	160-172
Chakrabarti, A. / Sheikh, A. H. / Griffith, M. / Oehlers, D. J.	Analysis of composite beams with partial shear interactions using a higher order beam theory	283-291
Han, Lin-Hai / Wang, Wei-Hua / Yu, Hong-Xia	Analytical behaviour of RC beam to CFST column frames subjected to fire	394-410
Chung, Lap-Loi / Chen, Yung-Tsang / Sun, Chi-Hsiang / Lien, Kuan-Hua / Wu, Lai-Yun	Applicability investigation of code-defined procedures on seismic performance assessment of typical school buildings in Taiwan	147-159
Qian, Jiaru / Jiang, Zao / Ji, Xiaodong	Behavior of steel tube-reinforced concrete composite walls subjected to high axial force and cyclic loading	173-184
Bedon, Chiara / Amadio, Claudio	Buckling of flat laminated glass panels under in-plane compression or shear	185-197
Ellobody, Ehab	Composite slim floor stainless steel beam construction exposed to different fires	1-13
Park, Hong-Gun / Hwang, Hyeon-Jong / Lee, Cheol-Ho / Park, Chang-Hee / Lee, Chang-Nam	Cyclic loading test for concrete-filled U-shaped steel beam–RC column connections	325-336
Lee, Hee-Hyun / Jeon, Jun-Chang / Kyung, Kab-Soo	Determination of a reasonable impact factor for fatigue investigation of simple steel plate girder railway bridges	316-324
El-Hacha, Raafat / Mashrik, Mohammad A.	Effect of SFRP confinement on circular and square concrete columns	379-393
Gara, Fabrizio / Ragni, Laura / Roia, Davide / Dezi, Luigino	Experimental behaviour and numerical analysis of floor sandwich panels	258-269
Karamlou, Aman / Kabir, Mohammad Zaman	Experimental study of L-shaped slender R-ICF shear walls under cyclic lateral loading	134-146
Langerholc, Marko / Česnik, Martin / Slavič, Janko / Boltežar, Miha	Experimental validation of a complex, large-scale, rigid-body mechanism	220-227
Nguyen, Canh Tuan / Joo, Hyun-Sung / Moon, Jiho / Lee, Hak-Eun	Flexural-torsional buckling strength of I-girders with discrete torsional braces under various loading conditions	337-350
Quilligan, A. / O'Connor, A. / Pakrashi, V.	Fragility analysis of steel and concrete wind turbine towers	270-282
Jorge, S. / Dias-Da-Costa, D. / Júlio, E. N. B. S.	Influence of anti-corrosive coatings on the bond of steel rebars to repair mortars	372-378
Lin, Cheng / Bennett, Caroline / Han, Jie / Parsons, Robert L.	Integrated analysis of the performance of pile-supported bridges under scoured conditions	27-38
Hantouche, Elie G. / Kukreti, Anant R. / Rassati, Gian A.	Investigation of secondary prying in thick built-up T-stub connections using nonlinear finite element modeling	113-122
Visintin, P. / Oehlers, D. J. / Wu, C. / Haskett, M.	A mechanics solution for hinges in RC beams with multiple cracks	61-69
Shi, Weixing / Shan, Jiazeng / Lu, Xilin	Modal identification of Shanghai World Financial Center both from free and ambient vibration response	14-26
Attard, T. L. / Wharton, C. R.	Optimal control parameterization for displacement and acceleration demands, and local post-yield constitutive responses	123-133
Park, Sangjoon / Mosalam, Khalid M.	Parameters for shear strength prediction of exterior beam–column joints without transverse reinforcement	198-209
Bruno, Luca / Venuti, Fiammetta / Nascé, Vittorio	Pedestrian-induced torsional vibrations of suspended footbridges: Proposal and evaluation of vibration countermeasures	228-238
Eder, M. A. / Vollum, R. L. / Elghazouli, A. Y.	Performance of ductile RC flat slab to steel column connections under cyclic loading	239-257
Lucksiri, Kraisorn / Miller, Thomas H. / Gupta, Rakesh / Pei, Shiling / van de Lindt, John W.	A procedure for rapid visual screening for seismic safety of wood-frame dwellings with plan irregularity	351-359
Zhang, Hao / Rasmussen, Kim J. R. / Ellingwood, Bruce R.	Reliability assessment of steel scaffold shoring structures for concrete formwork	81-89
Langdon, G. S. / von Klemperer, C. J. / Rowland, B. K. / Nurick, G. N.	The response of sandwich structures with composite face sheets and polymer foam cores to air-blast loading: Preliminary experiments	104-112
Du, Haiping / Zhang, Nong / Samali, Bijan / Naghdy, Fazel	Robust sampled-data control of structures subject to parameter uncertainties and actuator saturation	39-48
D'Ambrisi, Angelo / Mariani, Valentina / Mezzi, Marco	Seismic assessment of a historical masonry tower with nonlinear static and dynamic analyses tuned on ambient vibration tests	210-219
Maheri, Mahmoud R. / Pourfallah, S. / Azarm, R.	Seismic retrofitting methods for the jack arch masonry slabs	49-60
Bary, Benoît / de Morais, Marcus V. G. / Poyet, Stéphane / Durand, Sabine	Simulations of the thermo-hydro-mechanical behaviour of an annular reinforced concrete structure heated up to 200°C	302-315
Mosallam, Ayman / Reda Taha, Mahmoud M. / Kim, Jung J. / Nasr, Ahmed	Strength and ductility of RC slabs strengthened with hybrid high-performance composite retrofit system	70-80
Louter, Christian / Belis, Jan / Veer, Frederic / Lebet, Jean-Paul	Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size	292-301
Lange, David / Roben, Charlotte / Usmani, Asif	Tall building collapse mechanisms initiated by fire: Mechanisms and design methodology	90-103

Autor(en)

Titel

Seite(n)

Lishak, Vadim I. / Yagust, Vladimir I. / Yankelevsky, David Z.

2-D Orthotropic failure criteria for masonry

360-371

Shakeri, Kazem / Tarbali, Karim / Mohebbi, Mohtasham

An adaptive modal pushover procedure for asymmetric-plan buildings

160-172

Chakrabarti, A. / Sheikh, A. H. / Griffith, M. / Oehlers, D. J.

Analysis of composite beams with partial shear interactions using a higher order beam theory

283-291

Han, Lin-Hai / Wang, Wei-Hua / Yu, Hong-Xia

Analytical behaviour of RC beam to CFST column frames subjected to fire

394-410

Chung, Lap-Loi / Chen, Yung-Tsang / Sun, Chi-Hsiang / Lien, Kuan-Hua / Wu, Lai-Yun

Applicability investigation of code-defined procedures on seismic performance assessment of typical school buildings in Taiwan

147-159

Qian, Jiaru / Jiang, Zao / Ji, Xiaodong

Behavior of steel tube-reinforced concrete composite walls subjected to high axial force and cyclic loading

173-184

Bedon, Chiara / Amadio, Claudio

Buckling of flat laminated glass panels under in-plane compression or shear

185-197

Ellobody, Ehab

Composite slim floor stainless steel beam construction exposed to different fires

1-13

Park, Hong-Gun / Hwang, Hyeon-Jong / Lee, Cheol-Ho / Park, Chang-Hee / Lee, Chang-Nam

Cyclic loading test for concrete-filled U-shaped steel beam–RC column connections

325-336

Lee, Hee-Hyun / Jeon, Jun-Chang / Kyung, Kab-Soo

Determination of a reasonable impact factor for fatigue investigation of simple steel plate girder railway bridges

316-324

El-Hacha, Raafat / Mashrik, Mohammad A.

Effect of SFRP confinement on circular and square concrete columns

379-393

Gara, Fabrizio / Ragni, Laura / Roia, Davide / Dezi, Luigino

Experimental behaviour and numerical analysis of floor sandwich panels

258-269

Karamlou, Aman / Kabir, Mohammad Zaman

Experimental study of L-shaped slender R-ICF shear walls under cyclic lateral loading

134-146

Langerholc, Marko / Česnik, Martin / Slavič, Janko / Boltežar, Miha

Experimental validation of a complex, large-scale, rigid-body mechanism

220-227

Nguyen, Canh Tuan / Joo, Hyun-Sung / Moon, Jiho / Lee, Hak-Eun

Flexural-torsional buckling strength of I-girders with discrete torsional braces under various loading conditions

337-350

Quilligan, A. / O'Connor, A. / Pakrashi, V.

Fragility analysis of steel and concrete wind turbine towers

270-282

Jorge, S. / Dias-Da-Costa, D. / Júlio, E. N. B. S.

Influence of anti-corrosive coatings on the bond of steel rebars to repair mortars

372-378

Lin, Cheng / Bennett, Caroline / Han, Jie / Parsons, Robert L.

Integrated analysis of the performance of pile-supported bridges under scoured conditions

27-38

Hantouche, Elie G. / Kukreti, Anant R. / Rassati, Gian A.

Investigation of secondary prying in thick built-up T-stub connections using nonlinear finite element modeling

113-122

Visintin, P. / Oehlers, D. J. / Wu, C. / Haskett, M.

A mechanics solution for hinges in RC beams with multiple cracks

61-69

Shi, Weixing / Shan, Jiazeng / Lu, Xilin

Modal identification of Shanghai World Financial Center both from free and ambient vibration response

14-26

Attard, T. L. / Wharton, C. R.

Optimal control parameterization for displacement and acceleration demands, and local post-yield constitutive responses

123-133

Park, Sangjoon / Mosalam, Khalid M.

Parameters for shear strength prediction of exterior beam–column joints without transverse reinforcement

198-209

Bruno, Luca / Venuti, Fiammetta / Nascé, Vittorio

Pedestrian-induced torsional vibrations of suspended footbridges: Proposal and evaluation of vibration countermeasures

228-238

Eder, M. A. / Vollum, R. L. / Elghazouli, A. Y.

Performance of ductile RC flat slab to steel column connections under cyclic loading

239-257

Lucksiri, Kraisorn / Miller, Thomas H. / Gupta, Rakesh / Pei, Shiling / van de Lindt, John W.

A procedure for rapid visual screening for seismic safety of wood-frame dwellings with plan irregularity

351-359

Zhang, Hao / Rasmussen, Kim J. R. / Ellingwood, Bruce R.

Reliability assessment of steel scaffold shoring structures for concrete formwork

81-89

Langdon, G. S. / von Klemperer, C. J. / Rowland, B. K. / Nurick, G. N.

The response of sandwich structures with composite face sheets and polymer foam cores to air-blast loading: Preliminary experiments

104-112

Du, Haiping / Zhang, Nong / Samali, Bijan / Naghdy, Fazel

Robust sampled-data control of structures subject to parameter uncertainties and actuator saturation

39-48

D'Ambrisi, Angelo / Mariani, Valentina / Mezzi, Marco

Seismic assessment of a historical masonry tower with nonlinear static and dynamic analyses tuned on ambient vibration tests

210-219

Maheri, Mahmoud R. / Pourfallah, S. / Azarm, R.

Seismic retrofitting methods for the jack arch masonry slabs

49-60

Bary, Benoît / de Morais, Marcus V. G. / Poyet, Stéphane / Durand, Sabine

Simulations of the thermo-hydro-mechanical behaviour of an annular reinforced concrete structure heated up to 200°C

302-315

Mosallam, Ayman / Reda Taha, Mahmoud M. / Kim, Jung J. / Nasr, Ahmed

Strength and ductility of RC slabs strengthened with hybrid high-performance composite retrofit system

70-80

Louter, Christian / Belis, Jan / Veer, Frederic / Lebet, Jean-Paul

Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size

292-301

Lange, David / Roben, Charlotte / Usmani, Asif

Tall building collapse mechanisms initiated by fire: Mechanisms and design methodology

90-103

Anzeige

Engineering Structures - März 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - März 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.