Engineering Structures - März 2013

Erschienen:	März 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Patro, Sanjaya K. / Panneer Selvam, R. / Bosch, Harold	Adaptive h-finite element modeling of wind flow around bridges	569-577
Gosling, P. D. / Bridgens, B. N. / Albrecht, A. / Alpermann, H. / Angeleri, A. / Barnes, M. / Bartle, N. / Canobbio, R. / Dieringer, F. / Gellin, S. / Lewis, W. J. / Mageau, N. / Mahadevan, R. / Marion, J.-M. / Marsden, P. / Milligan, E. / Phang, Y. P. / Sahlin, K. / Stimpfle, B. / Suire, O. / Uhlemann, J.	Analysis and design of membrane structures: Results of a round robin exercise	313-328
Yuan, Aimin / Dai, Hangs / Sun, Dasong / Cai, Junjun	Behaviors of segmental concrete box beams with internal tendons and external tendons under bending	623-634
Al-Sibahy, Adnan / Edwards, Rodger	Behaviour of masonry wallettes made from a new concrete formulation under combination of axial compression load and heat exposure: Experimental approach	193-204
Rosenstrauch, Paul L. / Sanayei, Masoud / Brenner, Brian R.	Capacity analysis of gusset plate connections using the Whitmore, block shear, global section shear, and finite element methods	543-557
Camp, Charles V. / Huq, Farah	CO2 and cost optimization of reinforced concrete frames using a big bang-big crunch algorithm	363-372
Benson, Simon / AbuBakar, Anuar / Dow, Robert S.	A comparison of computational methods to predict the progressive collapse behaviour of a damaged box girder	266-280
Garzón-Roca, Julio / Marco, Creu Obrer / Adam, José M.	Compressive strength of masonry made of clay bricks and cement mortar: Estimation based on Neural Networks and Fuzzy Logic	21-27
Desprez, C. / Mazars, J. / Kotronis, P. / Paultre, P.	Damage model for FRP-confined concrete columns under cyclic loading	519-531
Karayannis, Chris G. / Chalioris, Constantin E.	Design of partially prestressed concrete beams based on the cracking control provisions	402-416
Martí, José V. / González-Vidosa, Fernando / Yepes, Víctor / Alcala, Julian	Design of prestressed concrete precast road bridges with hybrid simulated annealing	342-352
Su, Liang / Shi, Jitao	Displacement-based earthquake loss assessment methodology for RC frames infilled with masonry panels	430-441
Singh, Bhagat / Nanda, Bijoy Kumar	Dynamic analysis of damping in layered and welded beams	10-20
Zuada Coelho, B. / Vervuurt, A. H. J. M. / Peelen, W. H. A. / Leendertz, J. S.	Dynamics of modular expansion joints: The Martinus Nijhoff Bridge	144-154
Brunell, Garrett / Kim, Yail J.	Effect of local damage on the behavior of a laboratory-scale steel truss bridge	281-291
Choi, Eunsoo / Chung, Young-Soo / Park, Kyoungsoo / Jeon, Jong-Su	Effect of steel wrapping jackets on the bond strength of concrete and the lateral performance of circular RC columns	43-54
Pizzo, Benedetto / Gavioli, Mariangela / Lauriola, Marco P.	Evaluation of a design approach to the on-site structural repair of decayed old timber end beams	611-622
Zhang, Yu-ye / Harries, Kent A. / Yuan, Wan-cheng	Experimental and numerical investigation of the seismic performance of hollow rectangular bridge piers constructed with and without steel fiber reinforced concrete	255-265
Gil, Beatriz / Goñi, Rufino / Bayo, Eduardo	Experimental and numerical validation of a new design for three-dimensional semi-rigid composite joints	55-69
Silva Mamede, Nuno F. / Ramos, A. Pinho / Faria, Duarte M. V.	Experimental and parametric 3D nonlinear finite element analysis on punching of flat slabs with orthogonal reinforcement	442-457
Yang, Hua / Liu, Faqi / Zhang, Sumei / Lv, Xuetao	Experimental investigation of concrete-filled square hollow section columns subjected to non-uniform exposure	292-312
Leite, L. / Bonet, J. L. / Pallarés, L. / Miguel, Pedro F. / Fernandez-Prada, Miguel A.	Experimental research on high strength concrete slender columns subjected to compression and uniaxial bending with unequal eccentricities at the ends	220-232
Emami, Fereshteh / Mofid, Massood / Vafai, Abolhassan	Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls	750-762
Peng, Xue-Lin / Hao, Hong / Li, Zhong-Xian / Fan, Ke-Qing	Experimental study on subsea pipeline bedding condition assessment using wavelet packet transform	81-97
Syroka-Korol, E. / Tejchman, J. / Mróz, Z.	FE calculations of a deterministic and statistical size effect in concrete under bending within stochastic elasto-plasticity and non-local softening	205-219
Yang, Y. B. / Chang, K. C. / Li, Y. C.	Filtering techniques for extracting bridge frequencies from a test vehicle moving over the bridge	353-362
Zhang, J. / Xu, J. C. / Guo, S. L. / Wu, Z. S.	Flexibility-based structural damage detection with unknown mass for IASC-ASCE benchmark studies	486-496
Latour, M. / Rizzano, G.	Full strength design of column base connections accounting for random material variability	458-471
Kun Kwon, Dae / Kareem, Ahsan	Generalized gust-front factor: A computational framework for wind load effects	635-644
Sapountzakis, E. J. / Kampitsis, A. E.	Inelastic analysis of beams on two-parameter tensionless elastoplastic foundation	389-401
Zubydan, Ahmed H.	Inelastic large deflection analysis of space steel frames including H-shaped cross sectional members	155-165
Carmo, R. N. F. / Costa, H. / Simões, T. / Lourenço, C. / Andrade, D.	Influence of both concrete strength and transverse confinement on bending behavior of reinforced LWAC beams	329-341
Dang, Vu Hiep / François, Raoul	Influence of long-term corrosion in chloride environment on mechanical behaviour of RC beam	558-568
Kim, Sun-Woo / Yun, Hyun-Do	Influence of recycled coarse aggregates on the bond behavior of deformed bars in concrete	133-143
Bao, Chunxiao / Hao, Hong / Li, Zhong-Xian	Integrated ARMA model method for damage detection of subsea pipeline system	176-192
Rafiee, A. / Vinches, M.	Mechanical behaviour of a stone masonry bridge assessed using an implicit discrete element method	739-749
Pothisiri, Thanyawat / Panedpojaman, Pattamad	Modeling of mechanical bond–slip for steel-reinforced concrete under thermal loads	497-507
Koch, Heiko / Eisenhut, Lars / Seim, Werner	Multi-mode failure of form-fitting timber connections – Experimental and numerical studies on the tapered tenon joint	727-738
Liu, Min	A new dynamic increase factor for nonlinear static alternate path analysis of building frames against progressive collapse	666-673
Bouchaboub, M. / Samai, M. L.	Nonlinear analysis of slender high-strength R/C columns under combined biaxial bending and axial compression	37-42
Kashani, Mohammad M. / Crewe, Adam J. / Alexander, Nicholas A.	Nonlinear stress–strain behaviour of corrosion-damaged reinforcing bars including inelastic buckling	417-429
Pieńko, Michał / Błazik-Borowa, Ewa	Numerical analysis of load-bearing capacity of modular scaffolding nodes	1-9
Chen, Zhiyi / Dai, Zili / Huang, Yu / Bian, Guoqiang	Numerical simulation of large deformation in shear panel dampers using smoothed particle hydrodynamics	245-254
Gong, Yanglin / Xue, Yusong / Xu, Lei	Optimal capacity design of eccentrically braced steel frameworks using nonlinear response history analysis	28-36
Travanca, Rui / Varum, Humberto / Real, Paulo Vila	The past 20years of telecommunication structures in Portugal	472-485
Carrazedo, Ricardo / Mirmiran, Amir / de Hanai, Joao Bento	Plasticity based stress–strain model for concrete confinement	645-657
De Luca, Flavia / Verderame, Gerardo M.	A practice-oriented approach for the assessment of brittle failures in existing reinforced concrete elements	373-388
Park, Bong-Sik / Park, Sung-Hyun / Cho, Jae-Yeol	A pre-assembly method of steel reinforcement to improve the constructability of pier coping	166-175
Caro, L. A. / Martí-Vargas, J. R. / Serna, P.	Prestress losses evaluation in prestressed concrete prismatic specimens	704-715
Pérez-Aparicio, J. L. / Bravo, R. / Ortiz, P.	Refined element discontinuous numerical analysis of dry-contact masonry arches	578-587
Wang, Qi / Yu, Wenbin	A refined model for thermoelastic analysis of initially curved and twisted composite beams	233-244
Capozucca, Roberto	A reflection on the application of vibration tests for the assessment of cracking in PRC/RC beams	508-518
Aguilera, Jose / Fam, Amir	Retrofitting tubular steel T-joints subjected to axial compression in chord and brace members using bonded FRP plates or through-wall steel bolts	602-610
Chen, Cheng-Chih / Lin, Chun-Chou	Seismic performance of steel beam-to-column moment connections with tapered beam flanges	588-601
Houšt', Vladimír / Eliáš, Jan / Miča, Lumír	Shape optimization of concrete buried arches	716-726
Milani, Gabriele / Pizzolato, Marco / Tralli, Antonio	Simple numerical model with second order effects for out-of-plane loaded masonry walls	98-120
Russo, Gaetano / Pauletta, Margherita	Sliding instability of fiber-reinforced elastomeric isolators in unbonded applications	70-80
Guebailia, M. / Ouelaa, N. / Guyader, J. L.	Solution of the free vibration equation of a multi span bridge deck by local estimation method	695-703
Helincks, Peter / Boel, Veerle / De Corte, Wouter / De Schutter, Geert / Desnerck, Pieter	Structural behaviour of powder-type self-compacting concrete: Bond performance and shear capacity	121-132
Dong, J. F. / Wang, Q. Y. / Guan, Z. W.	Structural behaviour of recycled aggregate concrete filled steel tube columns strengthened by CFRP	532-542
Desai, Niranjan / McGinley, W. M.	A study of the out-of-plane performance of brick veneer wall systems in medium rise buildings under seismic loads	683-694
Mata, J. / Tavares de Castro, A. / Sá da Costa, J.	Time–frequency analysis for concrete dam safety control: Correlation between the daily variation of structural response and air temperature	658-665
Tovar, Andrés / Khandelwal, Kapil	Topology optimization for minimum compliance using a control strategy	674-682

Über diese
Datenseite
IssueID
17331
Veröffentlicht am:
06.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - März 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - März 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.