Development of Double-Sided Multipoint Press CNC and Operational Technology for Producing Freeform Molds

Many studies concerning the precision manufacturing of freeform concrete panels have been conducted, however, this process remains labor intensive taking significant amounts of time and cost. In particular, the precision in the shape of the panels produced tends to be low because of the manual work involved in producing the curves of those panels. This study documents the development of mold production technologies that can be used to produce precise curved surfaces on the upper and lower parts of a mold for freeform concrete panels. A double-sided multipoint press CNC (computer numerical control) produces curved upper and lower surfaces of a mold without the need for manual work, while the operational technology we developed to control this tool enhances the precision of the curves created. The precision of these technologies was verified through experiments. The difference between the shapes designed and those produced were found using 3D scans and quality inspections. Unpredictable errors can occur due to the size of certain curvatures, the elasticity of the silicone plate, and the rotational angle of the joints of the rods supporting the surfaces. To minimize errors, shape compensation was carried out through reverse engineering, leading to a maximum error of 2.887 mm, which is within the allowable error. The results achieved in this study are a significant step toward technologies that will produce increasingly precise freeform concrete panels.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.