Experimental Study on Shear Strength of Roof–Snow Interfaces for Prediction of Roof Snow Sliding

The sliding of roof snow may result in surcharges of snow load on lower roofs or the injury of pedestrians on the ground. It is therefore of great significance to study the mechanism of roof snow sliding, such that prevention or control measures can be developed to manage the risk. Considering four commonly used roofing materials, glass, steel, membrane, and concrete, two types of experiments were carried out in this study to possibly reveal the influence of roofing materials on the shear strength of the roof–snow interface: one is the critical angle tests where the angle at which the snow starts to slide off from the roof is tested, and the other is the shearing tests which aim to test the shear strength of the roof–snow interfaces at specific temperatures. The results showed that the critical angle for roof snow sliding, as well as the shear strength of the roof–snow interface for the four considered roofing materials, show a U-shape trend with the increase in surface roughness and that the shear strength of the roof–snow surface ranges from 0.15 kPa to 2 kPa for the cases considered, while the strength reaches its maximum at certain temperatures near −5 °C for a specific roofing material and snow thickness. These findings could be a useful reference for future experimental or simulation studies on roof snow sliding.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.