0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Material Characterization of Locally Available Textile Fabrics for Structural Applications

Autor(en): ORCID
ORCID
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 10, v. 12
Seite(n): 1589
DOI: 10.3390/buildings12101589
Abstrakt:

In the current era, rehabilitation and strengthening of reinforced concrete structures is a major need due to premature structural damage owing to various environmental effects, natural hazards and major modifications in the existing building use. Textile fabrics can be an economical and viable option in comparison to traditional strengthening techniques. Therefore, this study was planned to investigate the use of locally available textile fabrics for structural applications leading to economical and sustainable solutions. Sixteen fabrics were collected randomly from the local market and a series of tests including microscopic analysis, mass per unit area, ends and picks count, yarn number and uniaxial tensile strength were conducted to explore the most suitable textile fabric from strength and application aspects. Moreover, rectangular textile-reinforced mortar specimens were prepared incorporating those textile fabrics. Tested textile fabric specimens exhibited mass per unit area in the range of 117 to 1145 g/m² depending on the fabric types. It was observed that tensile strength of the tested textile fabric depends on fiber composition, ends and picks count, yarn number and weave type. The greater the number of yarns in a fabric, the denser it will be and therefore it will be stronger in either direction (warp and weft). It was observed that the tensile strength in warp direction was higher than in weft direction due to the higher number of yarns in the warp direction. For instance, tested specimen TF16 showed ultimate tensile loads of 2890 and 2600 N in warp and weft directions, respectively. Furthermore, plain weave type fabric showed higher strength compared to that of the twill weave. It can also be argued that among the sixteen selected fabric specimens, plain weave fabric (i.e., glass) was found most suitable for textile-reinforced mortar applications due to adequate spacing and alternative movement of yarns, which leads to a stronger bond with the matrix and ultimately achieving higher tensile strength.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10699884
  • Veröffentlicht am:
    11.12.2022
  • Geändert am:
    10.05.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine