Zijian Jia
- (2024): Effect of steel fiber shape and content on printability, microstructure and mechanical properties of 3D printable high strength cementitious materials. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Understanding the dynamic rheological property of cement paste blended with steel slag powder: From interparticle force and physico-chemical parameters of view. In: Construction and Building Materials, v. 422 (April 2024).
- (2024): Effect of recycled brick powder with various particle features on early-age hydration, water state, and rheological properties of blended cement paste in the context of 3D Printing. In: Construction and Building Materials, v. 418 (März 2024).
- (2024): Printability and mechanical properties of 3D printing ultra-high performance concrete incorporating limestone powder. In: Construction and Building Materials, v. 426 (Mai 2024).
- (2024): Early-age inhomogeneous deformation of 3D printed concrete: Characteristics and influences of superplasticizer and water-binder ratio. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Revealing the difference between creep behavior of hydration products of Portland cement and alkali-activated slag paste at early age. In: Journal of Building Engineering, v. 77 (Oktober 2023).
- (2023): Effect of low-calcium and high-magnesium ferronickel slag on the microstructure and micromechanical properties of alkali-activated blended ground granulated blast furnace slag. In: Construction and Building Materials, v. 406 (November 2023).
- (2019): The microstructural change of C-S-H at elevated temperature in Portland cement/GGBFS blended system. In: Cement and Concrete Research, v. 123 (September 2019).
- (2023): Effect of formic acid as an accelerator on foam-stability, compressive strength, and pore size distribution of foam concrete. In: Journal of Building Engineering, v. 66 (Mai 2023).
- (2022): 3D printing lightweight aggregate concrete prepared with shell-packing-aggregate method - Printability, mechanical properties and pore structure. In: Journal of Building Engineering, v. 62 (Dezember 2022).
- (2022): Pore structure, internal relative humidity, and fiber orientation of 3D printed concrete with polypropylene fiber and their relation with shrinkage. In: Journal of Building Engineering, v. 61 (Dezember 2022).
- (2022): A two-phase design strategy based on the composite of mortar and coarse aggregate for 3D printable concrete with coarse aggregate. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2018): Hydration products, internal relative humidity and drying shrinkage of alkali activated slag mortar with expansion agents. In: Construction and Building Materials, v. 158 (Januar 2018).
Structurae kooperiert mit
