H. K. Lee 
- (2024): Potential for the liquid carbonation curing of Portland cement using sodium bicarbonate solutions. In: Construction and Building Materials, v. 427 (Mai 2024).
- (2024): Investigation of leaching behaviors of carbonation-cured CSA cements using an electrically accelerated leaching test. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2010): Piezoelectric-based non-destructive monitoring of hydration of reinforced concrete as an indicator of bond development at the steel–concrete interface. In: Cement and Concrete Research, v. 40, n. 12 (Dezember 2010).
- (2016): Physicochemical properties of binder gel in alkali-activated fly ash/slag exposed to high temperatures. In: Cement and Concrete Research, v. 89 (November 2016).
- (2016): Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement. In: Cement and Concrete Research, v. 82 (April 2016).
- (2023): Influence of various deterioration factors on the electrical properties of conductive cement paste. In: Construction and Building Materials, v. 367 (Februar 2023).
- (2023): Multi-level micromechanics-based homogenization for the prediction of damage behavior of multiscale fiber-reinforced composites. In: Composite Structures, v. 303 (Januar 2023).
- (2022): Modifications in hydration kinetics and characteristics of calcium aluminate cement upon blending with calcium sulfoaluminate cement. In: Construction and Building Materials, v. 342 (August 2022).
- (2010): Non-destructive evaluation of concrete quality using PZT transducers. In: Smart Structures and Systems, v. 6, n. 7 (September 2010).
- (2016): Percolation threshold and piezoresistive response of multi-wall carbon nanotube/cement composites. In: Smart Structures and Systems, v. 18, n. 2 (August 2016).
- (2021): Local Al network and material characterization of belite-calcium sulfoaluminate (CSA) cements. In: Materials and Structures, v. 55, n. 1 (18 Dezember 2021).
- (2021): Influence of water ingress on the electrical properties and electromechanical sensing capabilities of CNT/cement composites. In: Journal of Building Engineering, v. 42 (Oktober 2021).
- (2021): Internal carbonation of belite-rich Portland cement: An in-depth observation at the interaction of the belite phase with sodium bicarbonate. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): MgO-induced phase variation in alkali-activated binders synthesized under hydrothermal conditions. In: Materials and Structures, v. 54, n. 3 (16 April 2021).
- (2021): A novel physicomechanical approach to dispersion of carbon nanotubes in polypropylene composites. In: Composite Structures, v. 258 (Februar 2021).
- (2020): Piezoelectric characteristics of urethane composites incorporating piezoelectric nanomaterials. In: Composite Structures, v. 241 (Juni 2020).
- (2018): Piezoresistive characteristics of CNT fiber-incorporated GFRP composites prepared with diversified fabrication schemes. In: Composite Structures, v. 203 (November 2018).
- (2017): Mechanical properties and piezoresistive sensing capabilities of FRP composites incorporating CNT fibers. In: Composite Structures, v. 178 (Oktober 2017).
- (2017): Influences of CNT dispersion and pore characteristics on the electrical performance of cementitious composites. In: Composite Structures, v. 164 (März 2017).
- (2015): Interfacial bond behavior of FRP fabrics bonded to fiber-reinforced geopolymer mortar. In: Composite Structures, v. 134 (Dezember 2015).
- (2015): Interfacial crack-induced debonding behavior of sprayed FRP laminate bonded to RC beams. In: Composite Structures, v. 128 (September 2015).
- (2009): On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints. In: Composite Structures, v. 87, n. 1 (Januar 2009).
- (2019): Multi-level homogenization for the prediction of the mechanical properties of ultra-high-performance concrete. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2010): Monitoring the strength development in concrete by EMI sensing technique. In: Construction and Building Materials, v. 24, n. 9 (September 2010).
- (2013): Microbially mediated calcium carbonate precipitation on normal and lightweight concrete. In: Construction and Building Materials, v. 38 (Januar 2013).
- (2015): A novel eco-friendly porous concrete fabricated with coal ash and geopolymeric binder: Heavy metal leaching characteristics and compressive strength. In: Construction and Building Materials, v. 79 (März 2015).
- (2016): Mechanical properties and setting characteristics of geopolymer mortar using styrene-butadiene (SB) latex. In: Construction and Building Materials, v. 113 (Juni 2016).
- (2016): Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar. In: Construction and Building Materials, v. 126 (November 2016).
- (2005): Numerical study on retrofit and strengthening performance of sprayed fiber reinforced polymer. In: Engineering Structures, v. 27, n. 10 (August 2005).
- (2013): A multi-sensing electromechanical impedance method for non-destructive evaluation of metallic structures. In: Smart Materials and Structures, v. 22, n. 9 (September 2013).
Structurae kooperiert mit
