0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Gergess, Antoine / Sen, Rajan (2004): Fabrication Aids for Cold Straightening I-Girders. In: Engineering Journal, v. 41, n. 2 (Juni 2004).

    https://doi.org/10.62913/engj.v41i2.826

  2. Stroh, Steven L. / Sen, Rajan / Ansley, Marcus (2010): Load Testing a Double-Composite Steel Box Girder Bridge. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2200, n. 1 (Januar 2010).

    https://doi.org/10.3141/2200-05

  3. Gergess, Antoine N. / Sen, Rajan (2008): Cold Curving Steel Bridge Girders. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2081, n. 1 (Januar 2008).

    https://doi.org/10.3141/2081-18

  4. Gergess, Antoine N. / Sen, Rajan (2014): Impact of using higher strength concrete on the design of prestressed concrete bridges. In: Bridge Structures, v. 10, n. 2-3 ( 2014).

    https://doi.org/10.3233/brs-140075

  5. Alsulami, Mastour / Mullins, Gray / Sen, Rajan (2023): Effect of imperfect cure on tensile bond measurement. In: Construction and Building Materials, v. 395 (September 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132215

  6. Yazdani, Shayan / Al Azzawi, Mostfa / Garcia, Cesar Quesada / Mullins, Gray / Sen, Rajan (2023): Glass Fiber-Reinforced Polymer Effectiveness in Field Repair of Piles. In: ACI Structural Journal, v. 120, n. 1 (Januar 2023).

    https://doi.org/10.14359/51737230

  7. Al Azzawi, Mostfa / Hopkins, Philip / Ross, Joseph / Mullins, Gray / Sen, Rajan (2018): Carbon Fiber-Reinforced Polymer Concrete Masonry Unit Bond after 20 Years of Outdoor Exposure. In: ACI Structural Journal, v. 115, n. 4 (Juli 2018).

    https://doi.org/10.14359/51702226

  8. Sen, Rajan (1987): Green's Function Implementation for Pile Analysis. In: Journal of Engineering Mechanics (ASCE), v. 113, n. 4 (April 1987).

    https://doi.org/10.1061/(asce)0733-9399(1987)113:4(594)

  9. Gergess, Antoine N. / Sen, Rajan (2014): Inelastic response of wide flange steel beams curved by symmetrical weak axis bending using two-point loads. In: Steel and Composite Structures, v. 17, n. 6 (Dezember 2014).

    https://doi.org/10.12989/scs.2014.17.6.951

  10. Gergess, Antoine N. / Sen, Rajan (2005): Cold curving symmetric unstiffened I-girders. In: Journal of Constructional Steel Research, v. 61, n. 4 (April 2005).

    https://doi.org/10.1016/j.jcsr.2004.10.007

  11. Gergess, Antoine N. / Sen, Rajan (2005): Fabrication of unsymmetrical curved plate girders by cold bending. In: Journal of Constructional Steel Research, v. 61, n. 10 (Oktober 2005).

    https://doi.org/10.1016/j.jcsr.2005.03.005

  12. Gergess, Antoine N. / Sen, Rajan (2007): Full-scale cold bending demonstration test. In: Journal of Constructional Steel Research, v. 63, n. 10 (Oktober 2007).

    https://doi.org/10.1016/j.jcsr.2006.11.015

  13. Gergess, Antoine N. / Sen, Rajan (2008): Cambering structural steel I-girders using cold bending. In: Journal of Constructional Steel Research, v. 64, n. 4 (April 2008).

    https://doi.org/10.1016/j.jcsr.2007.10.001

  14. Gergess, Antoine N. / Sen, Rajan (2009): Cold bending HPS 485W steel bridge girders. In: Journal of Constructional Steel Research, v. 65, n. 8-9 (August 2009).

    https://doi.org/10.1016/j.jcsr.2009.04.002

  15. Gergess, Antoine / Sen, Rajan (2016): Curving structural steel girders by two-point bending. In: Journal of Constructional Steel Research, v. 122 (Juli 2016).

    https://doi.org/10.1016/j.jcsr.2016.04.002

  16. Gergess, Antoine N. / Sen, Rajan (2008): Final Element Modelling for Heat-Curved Steel Girders. Vorgetragen bei: IABSE Conference: Information and Communication Technology (ICT) for Bridges, Buildings and Construction Practice, Helsinki, Finland, June 2008.

    https://doi.org/10.2749/222137808796106648

  17. Stroh, Steven L. / Sen, Rajan / Ansley (deceased), Marcus / Pai, Niranjan (2013): Overview of Research Project on Double Composite Steel Bridge. Vorgetragen bei: IABSE Symposium: Long Span Bridges and Roofs - Development, Design and Implementation, Kolkata, India, 24-27 September 2013.

    https://doi.org/10.2749/222137813808626993

  18. Al Azzawi, Mostfa / Hopkins, Philip / Mullins, Gray / Sen, Rajan (2018): FRP–Concrete Bond after 12-Year Exposure in Tidal Waters. In: Journal of Composites for Construction, v. 22, n. 5 (Oktober 2018).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000864

  19. Khoe, Chandra / Sen, Rajan / Bhethanabotla, Venkat R. (2011): Oxygen Permeability of Fiber-Reinforced Polymers. In: Journal of Composites for Construction, v. 15, n. 4 (August 2011).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000187

  20. Khoe, Chandra / Sen, Rajan / Bhethanabotla, Venkat R. (2012): Oxygen Permeability of FRP-Concrete Repair Systems. In: Journal of Composites for Construction, v. 16, n. 3 (Juni 2012).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000257

  21. Winters, Danny / Mullins, Gray / Sen, Rajan / Schrader, Andy / Stokes, Michael (2008): Bond Enhancement for FRP Pile Repair in Tidal Waters. In: Journal of Composites for Construction, v. 12, n. 3 (Juni 2008).

    https://doi.org/10.1061/(asce)1090-0268(2008)12:3(334)

  22. Suh, Kwangsuk / Mullins, Gray / Sen, Rajan / Winters, Danny (2010): Effective Repair for Corrosion Control Using FRP Wraps. In: Journal of Composites for Construction, v. 14, n. 4 (August 2010).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000094

  23. Sen, Rajan (2015): Developments in the durability of FRP-concrete bond. In: Construction and Building Materials, v. 78 (März 2015).

    https://doi.org/10.1016/j.conbuildmat.2014.12.106

  24. Sen, Rajan (2003): Advances in the application of FRP for repairing corrosion damage. In: Progress in Structural Engineering and Materials, v. 5, n. 2 ( 2003).

    https://doi.org/10.1002/pse.147

  25. Gergess, Antoine N. / Sen, Rajan (2013): Design implications of increased live loads on continuous precast, prestressed concrete girder bridges. In: PCI Journal, v. 58, n. 2 (März 2013).

    https://doi.org/10.15554/pcij.03012013.64.79

  26. lssa, Mohsen A. / Sen, Rajan / Amer, Ahmed (1993): Comparative Study of Transfer ength in Fiberglass and Steel Pretensioned Concrete Members. In: PCI Journal, v. 38, n. 6 (November 1993).

    https://doi.org/10.15554/pcij.11011993.52.63

  27. Sen, Rajan / Issa, Mohsen / Gergess, Antoine / Sun, Xianghong (1993): Collapse Load Analysis of Continuous, Posttensioned Voided Slab Bridge Models. In: Journal of Structural Engineering (ASCE), v. 119, n. 6 (Juni 1993).

    https://doi.org/10.1061/(asce)0733-9445(1993)119:6(1825)

  28. Sen, Rajan / Issa, Mohsen / Sun, Xianghong / Gergess, Antoine (1994): Finite Element Modeling of Continuous Posttensioned Voided Slab Bridges. In: Journal of Structural Engineering (ASCE), v. 120, n. 2 (Februar 1994).

    https://doi.org/10.1061/(asce)0733-9445(1994)120:2(651)

  29. Sen, Rajan / Gergess, Antoine N. / Issa, Camille (2003): Finite-Element Modeling of Heat-Curved I-Girders. In: Journal of Bridge Engineering (ASCE), v. 8, n. 3 (Mai - Juni 2003).

    https://doi.org/10.1061/(asce)1084-0702(2003)8:3(153)

  30. Torres-Acosta, Andrés A. / Sen, Rajan / Martnez-Madrid, Miguel (2004): Cathodic Protection of Reinforcing Steel in Concrete Using Conductive-Polymer System. In: Journal of Materials in Civil Engineering (ASCE), v. 16, n. 4 (August 2004).

    https://doi.org/10.1061/(asce)0899-1561(2004)16:4(315)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine