Shoude Wang 
- (2024): Study on the Properties of Belite Calcium Sulfoaluminate Cement–Ordinary Portland Cement Composite Cementitious System. In: Buildings, v. 14, n. 4 (27 März 2024).
- (2023): Feasibility of using iron-rich phosphoaluminate cement to prepare anti-corrosive coatings for rebars. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2023): Physical and chemical chloride binding characteristics of the hydration products for phosphoaluminate cement. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Effect of polyvinyl alcohol powder on the impermeability, frost resistance and pore structure of calcium sulfoaluminate cement concrete. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Introducing fiber to enhance the mechanical properties and durability of polymer-modified cement-based coating. In: Construction and Building Materials, v. 372 (April 2023).
- (2023): Effects of nanosilica on supersulfated cements of different clinker-activation degree. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2023): Utilization of Polydimethylsiloxane (PDMS) in polymer cement-based coating to improve marine environment service performance. In: Construction and Building Materials, v. 367 (Februar 2023).
- (2023): Enhanced comprehensive performance of polymer-CSA cement coating with graphene oxide. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2023): Fabrication of bulk hydrophobic cement-based materials with ultra-high impermeability. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): Assessment and mechanism of inorganic hydrophobic flake incorporated into a polymer-modified cement-based coating. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): Mechanical and chloride ions solidification performance of C4A3($,P) mineral as promising marine engineering material. In: Construction and Building Materials, v. 323 (März 2022).
- (2021): Synergistic effects of supplementary cementitious materials in limestone and calcined clay-replaced slag cement. In: Construction and Building Materials, v. 282 (Mai 2021).
- (2021): Chloride binding and transport characteristic of phosphoaluminate cement-based marine sand coating subjected to marine environment. In: Construction and Building Materials, v. 281 (April 2021).
- (2021): Constituent phases optimization of modified sulphoaluminate cement and its characteristic of Cl− solidification and resistance to marine erosion. In: Construction and Building Materials, v. 311 (Dezember 2021).
- (2021): Stability and leaching resistance performance of SAC repair and solidification materials exposed to gamma irradiation. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): The Impact of Extended Heat Exposure on Rapid Sulphoaluminate Cement Concrete Up To 120°C. In: Periodica Polytechnica Civil Engineering, v. 65, n. 2 ( 2021).
- (2021): Printability and efflorescence control of admixtures modified 3D printed white Portland cement-based materials based on the response surface methodology. In: Journal of Building Engineering, v. 38 (Juni 2021).
- (2016): Formation and early hydration characteristics of C2.75B1.25A₃$ in binary system of C2.75B1.25A₃$-C₂S. In: Materiales de Construccion, v. 66, n. 323 (August 2016).
- (2015): Constituent phases and mechanical properties of iron oxide-additioned phosphoaluminate cement. In: Materiales de Construccion, v. 65, n. 318 (Mai 2015).
- (2020): Hydration mechanisms of Ba-doped ye'elimite: Effect of Ba/Ca ratio on hydration behavior. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite. In: Construction and Building Materials, v. 234 (Februar 2020).
- (2020): Effect of SCMs on the freeze-thaw performance of iron-rich phosphoaluminate cement. In: Construction and Building Materials, v. 230 (Januar 2020).
- (2019): Recycling of paper sludge powder for achieving sustainable and energy-saving building materials. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2019): Effect of the optimized triple mixing method on the ITZ microstructure and performance of recycled aggregate concrete. In: Construction and Building Materials, v. 203 (April 2019).
- (2019): Belite-calcium sulfoaluminate cement prepared with phosphogypsum: Influence of P2O5 and F on the clinker formation and cement performances. In: Construction and Building Materials, v. 203 (April 2019).
- (2013): Evaluation of pre-coated recycled aggregate for concrete and mortar. In: Construction and Building Materials, v. 43 (Juni 2013).
- (2014): Effects of aggregate gradation and polymer modifiers on properties of cement-EPS/vitrified microsphere mortar. In: Construction and Building Materials, v. 73 (Dezember 2014).
- (2017): Investigation on the formation of tobermorite in calcium silicate board and its influence factors under autoclaved curing. In: Construction and Building Materials, v. 143 (Juli 2017).
- (2013): Effect of aggregate coating thickness on pore structure features and properties of porous ecological concrete. In: Magazine of Concrete Research, v. 65, n. 16 (August 2013).
- (2005): Dielectric and piezoelectric properties of piezoelectric ceramic–sulphoaluminate cement composites. In: Smart Materials and Structures, v. 14, n. 5 (Oktober 2005).
Structurae kooperiert mit
