0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Comparative Study on the Field- and Lab-Based Soil-Water Characteristic Curves for Expansive Soils

Autor(en): ORCID



ORCID
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2022
Seite(n): 1-9
DOI: 10.1155/2022/6390442
Abstrakt:

Expansive soils are problematic and viewed as a potential hazard for buildings and structures due to swell and shrink phenomena. The damaging effect of these soils is strongly correlated with the soil-water characteristics of expansive soils present in the shallow depth. The seasonal wetting-drying cycle is vital in fluctuating moisture content in the surficial soils. As such, soils remain unsaturated most of the time due to high absorption capacity. Therefore, it is crucial to assess them as unsaturated soil, and the soil-water characteristic curve (SWCC) is an essential tool for measuring unsaturated soils’ mechanical and hydraulic properties. The main objective of this study was to establish both field- and lab-based SWCCs for the expansive soils and compare them for determining the possible difference between them. For this purpose, eight sites of expansive soils were selected for sampling and in situ testing. These sites include three locations of Karak, three locations of Kohat, and two locations of D.I areas. Based on the experimental results, Karak’s expansive soil indicated a high suction value of 705 kPa, while D. I Khan’s soil showed the least suction equal to 595 kPa. The comparison of field and lab SWCCs for the potential sites presented a close agreement in the matric suction values beyond the air entry values (AEVs), particularly in the residual suction zones. It was also concluded that for expansive soils, the field- and lab-based SWCCs are comparable beyond the AEVs. The established curves can be successfully utilized to assess local expansive soils in the framework of unsaturated soils.

Copyright: © Bakht Zamin et al. et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10663852
  • Veröffentlicht am:
    09.05.2022
  • Geändert am:
    01.06.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine