0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Compressed Stabilized Earth Block Incorporating Municipal Solid Waste Incinerator Bottom Ash as a Partial Replacement for Fine Aggregates

Autor(en):
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 5, v. 13
Seite(n): 1114
DOI: 10.3390/buildings13051114
Abstrakt:

This research explores the potential of using municipal solid waste incinerator bottom ash (MSWIBA) as a partial replacement for fine aggregate and ordinary Portland cement (OPC) as a stabilizer in the production of compressed stabilized earth blocks (CSEBs). The study investigates the effect of varying levels of cement content (ranging from 0% to 10%) and MSWIBA content (ranging from 0% to 25%) on the strength and durability of CSEBs. The strength characteristics of CSEBs were evaluated through tests such as wet and dry compressive strength, flexural strength, water absorption, and stress–strain behavior, while durability was tested through wetting–drying cyclic tests. The results indicated that CSEB blocks made with 20% MSWIBA content and 10% cement were able to fulfill strength criteria. Additionally, using these blocks could result in cost savings of 8% during construction when compared to using fired clay bricks (FCB). Furthermore, varying the cement content while maintaining a constant proportion of MSWIBA showed a significant change in the stress–strain behavior and a cost analysis performed for CSEBs stabilized with the optimal quantity of MSWIBA-OPC combination showed that they can be a viable alternative to conventional earth blocks, providing an eco-friendly, sustainable, and cost-effective solution for construction initiatives.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10728474
  • Veröffentlicht am:
    30.05.2023
  • Geändert am:
    01.06.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine