0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Crack Self-Healing of Cement Mortar Containing Ureolytic Bacteria Immobilized in Artificial Functional Carrier under Different Exposure Environments

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 9, v. 12
Seite(n): 1348
DOI: 10.3390/buildings12091348
Abstrakt:

The ureolytic bacteria and nutrients were immobilized in the artificial functional carrier (AFC) and the self-healing cement mortar, based on the AFC-encapsulated bacteria, was prepared for this paper. The crack self-healing effect of mortars with and without bacteria under different exposure environments (standard curing, dry–wet cycle curing, and water curing) was investigated by the visual observation of surface and internal cracks, water permeability tests, and mechanical performance recovery. In addition, the internal healing products of the cracks were observed using the metallographic microscope. The results show that the mortar specimens containing ureolytic bacteria immobilized in artificial functional carrier have a higher crack area repair ratio, and better water tightness regain and recovery ratio of flexural strength compared with the control mortars under the same exposure environment. The self-healing effect of mortar cracks with and without bacteria is obviously affected by the exposure environments. The self-healing effect of the cracks are the best when the mortar specimens are cured in water, followed by dry–wet cycle curing, and the self-healing effect of the cracks is the worst in standard curing, indicating that the presence of water is necessary for crack self-healing. The mortar specimens with bacteria generate more repair products in the surface and interior of the cracks to greatly improve the self-repair ability of the specimens, which promotes the recovery of water tightness and mechanical performance.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10692552
  • Veröffentlicht am:
    23.09.2022
  • Geändert am:
    10.11.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine