0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Cross-story installation of viscous dampers in timber frame houses for earthquake damage reduction

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Frontiers in Built Environment, , v. 8
DOI: 10.3389/fbuil.2022.1037832
Abstrakt:

Timber frame structures are commonly used in housing construction that use squared-off timber beams, columns, and walls as lateral load-bearing members. A small-size viscous damper can be applied to timber frame houses to reduce damage caused by major earthquakes. Dampers are normally installed inter-story (between adjacent floors) to absorb vibration energy and reduce seismic response. Another method is the cross-story installation wherein a damper is installed between the rooftop and base of the structure across intermediate floors. This study investigated the effectiveness of cross-story installation of a viscous damper by conducting eigenvalue analyses of 2DOF models and earthquake response analyses of a two-story timber frame house subjected to the 2016 Kumamoto earthquake and other major earthquakes. We compared the damping factors and response reduction effects of the cross-story installation with those of conventional inter-story installations. The results showed that the cross-story installation of dampers was more effective than the inter-story installation in terms of reducing story drift. Furthermore, the cross-story installation reduced the number of dampers required for preventing severe damage by half. Finally, the cross-story installation allowed the viscous damper in the first story to absorb vibration energy nearly twice as much as that of the inter-story installation. Therefore, while the cross-story damper is typically installed on an outer frame fixed to the house, our results conclude that it can be applied to an existing house as a seismic retrofitting measure.

Copyright: © 2022 Yutaka Nakamura, Ryota Matsumura
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10702889
  • Veröffentlicht am:
    11.12.2022
  • Geändert am:
    15.02.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine