0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Dynamic Response Analysis of Intake Tower-Hydrodynamic Coupling Boundary Based on SV Wave Spatial Incidence

Autor(en):




Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 7, v. 13
Seite(n): 1704
DOI: 10.3390/buildings13071704
Abstrakt:

In view of the insufficient analysis of the coupled joint seismic response of the intake tower–reservoir water–foundation boundary under the oblique incidence of SV wave space, a three-dimensional dynamic equation of the oblique incidence of SV wave space is established in this paper. The external wave input method of viscoelastic artificial boundary combined with equivalent load and the acoustic medium theory are used to simulate the action of reservoir water, and the angle change in the SV wave incidence is realized by controlling the incident vector. The dynamic response of the structure is analyzed and the dynamic response characteristics of the structure at different incidence angles are discussed. The results show that the dynamic response and damage degree of the intake tower decreases first and then increases with the change in angle. When the vertical incidence is 0°, the maximum displacement drop is 82.05%, and the displacement response of the intake tower is more sensitive to the change in SV wave incidence angle. When SV wave is vertically incident at 0° and 35° (near the maximum critical angle of incident), the dynamic response, dynamic water pressure, damage diffusion velocity, damage area, and damage degree of the intake tower are relatively large, which seriously affects the safety and stability of the intake tower. Therefore, the influence of the oblique incidence should be considered comprehensively in the aseismic stability design of the water intake tower to provide a new idea for the safety evaluation of the same type of engineering.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10737099
  • Veröffentlicht am:
    03.09.2023
  • Geändert am:
    14.09.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine