Effect of Dynamic Loads on the Long-Term Efficiency of Liner Layers

The liner layers of natural sand-clay mixtures are extensively used in a range of geotechnical and geoenvironmental projects. In many of these projects, these layers are exposed to dynamic loads or waves due to natural seismic earthquakes or due to human activities, such as machine vibrations, traffic repeated loads, and other impact loads. The permeability of liners is a key property and should be adequately designed to sustain these loads during their lifetime of serviceability. This study sought to evaluate the possible effects of dynamic loads on the efficiency of two different sand-expansive clay (SCL) liners during their lifetime. This was achieved through experimental tests for two series; the first series was subjected to dynamic loads (up to 500 cycles) using the triaxial dynamic system and then tested for permeability for a long period of up to 100 days. The permeability results were compared with the second series tested without being subject to dynamic loads. The dynamic properties for both liners, such as the shear modulus (G), damping ratio (D), and degradation index (δ) were determined and discussed. The results indicated that both materials showed significant degradation with an increase in cycles of dynamic loads; most of the degradation took place during the first 100 cycles. In consequence, the dynamic loads induced a significant effect on the performance of the liners during their lifetime (reducing the permeability by more than six times). These effects were time-dependent and should be taken into account during the design phases.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.