Experimental Analysis of Thermo-Technical Parameters of Windows Glazing in the Pavilion Laboratory

Improving the energy performance of buildings in the context of external climatic conditions and the requirements of indoor environments is a hot topic in the construction industry. It primarily concerns reducing the energy used for heating and cooling in buildings. In the EU sector, this is addressed by the Energy Performance Directive (EPBD), which is followed by relevant national standards. The energy performance of buildings is strongly influenced by the window structures that are part of the building envelope. Their influence on energy performance is represented by the heat transfer coefficient, which differs in the actual built-in window construction from the design value given by the manufacturer. In this paper, the authors deal with its measurement in situ using the heat flux measurement method. The measurement was carried out in the pavilion laboratory of the Department of Building Engineering and Urban Planning (DBEUP), Faculty of Civil Engineering (FCE), University of Zilina (UNIZA), on three window constructions of different material bases. During the measurements, surface temperatures on the glazing, heat flux density, and air temperatures were recorded in minute increments. The influence of the year-round cycle of the outdoor environment on the embedded window structures is presented and the results are presented in the conclusion of the paper.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.