Experimental Study and Finite Element Analysis on the Modification of Fast-Hardening Polymer Cement Composite Material Applied to the Anchorage Zone of Expansion Joint

Bridges’ expansion joints are prone to damage during operation, and repairing them often requires interruption of traffic, the impact of which can be minimized by using fast-hardening and early-strength expansion joint materials. In this study, a fast-hardening polymer cement composite (PCC) was developed using sulfate aluminate cement and ordinary silicate cement as binding agents and polymer powder as admixture. To improve the crack resistance of the material, several types of fibers were added and the effects of different fiber types and admixtures on the crack resistance of the material were compared using SCB tests. The results showed that the best effect of improving the crack resistance of concrete was achieved with a volume fraction of 0.5% of basalt fibers. Then, a test method for the interfacial shear properties of PCC materials and ordinary concrete was established, and the cohesive force model was selected as the interface simulation parameter for finite element analysis and compared with experimental data to verify its feasibility. Finally, based on the previously obtained PCC material parameters, a solid model of the expansion joint anchorage zone was established to study the mechanical properties of the expansion joint anchorage zone with the application of fast-hardening PCC material. This research provides a new way to develop fast-hardening and early-strength expansion joint materials with high crack resistance.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.