0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental Study of Water Transfer and Ice Accumulation in Freezing Soils under Different Conditions

Autor(en):


ORCID

ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2021
Seite(n): 1-11
DOI: 10.1155/2021/3869820
Abstrakt:

A series of tests for water transfer and ice accumulation were conducted under different soil types and conditions of water supply method, temperature gradient, and initial water content; the influence of the above parameters on the efficiency of water and vapor transfer was investigated and discussed. The main conclusions drawn are as follows. First, due to the difference in permeability for different soil type, water (i.e., liquid water and vapor) transfers differently. The water (or ice) accumulated in the soils of calcareous sand, silty soil in Lanzhou (SSL), red clay in Changsha, and silty soil in Hohhot (SSH) under the top plate is 34.5%, 21.0%, 11.33%, and 26.7%, respectively. In addition, the water (or ice) accumulation is determined by the holding capacity of water. Second, the supply method of liquid water is more efficiently compared with that of vapor supply, with the water contents increasing to 60.5% and 57.3% for liquid water and vapor supply. Third, the larger the temperature gradient, the greater the water accumulation in the frozen area. The increased amount of water mass under different temperature boundary conditions is 227.9 g, 253.3 g, and 273.8 g, respectively. Finally, the initial water content in silty soil has a significant influence on water and vapor transfer. The increased amounts of water for the tests of the initial water content of 5%, 10%, and 15% are 282.6 g, 253.3 g, and 132.5 g, respectively. The smaller the initial water content, the greater the water transfer in the unfrozen zone and vapor transfer in the frozen zone.

Copyright: © Sihao Liang et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10607751
  • Veröffentlicht am:
    15.05.2021
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine