0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental Study on the Seismic Performance of L-Shaped CFST Columns in Different Combinations

Autor(en):

ORCID
ORCID




Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 9, v. 13
Seite(n): 2320
DOI: 10.3390/buildings13092320
Abstrakt:

L-shaped concrete-filled steel tubular (CFST) columns represent a valuable structural element with an L-shaped cross-section, primarily employed in the corner columns of framed structures. These columns offer several advantages, including space efficiency by avoiding column protrusion, robust mechanical properties, high load-bearing capacity, ductility, and efficient utilization of internal building space. This article presents the outcomes of an experimental investigation into the seismic behavior of L-shaped CFST columns. The experimental study investigated the seismic performance of nine L-shaped CFST columns while considering different cross-sectional dimensions, their combinations, and varying levels of confinement. The results obtained from this study indicate that L-shaped CFST columns possess favorable seismic performance characteristics. However, there exists the potential for significant improvement by modifying certain parameters. Enhancements in seismic performance were observed when increasing the cross-sectional dimensions of the column and the length of its legs. The use of steel tubes and the provision of adequate confinement also demonstrated notable benefits. Moreover, the better arrangement of steel tubes within the column positively influenced seismic performance. These findings can potentially inform and enhance the design of L-shaped CFST columns, rendering them more resilient to seismic forces.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10744670
  • Veröffentlicht am:
    28.10.2023
  • Geändert am:
    07.02.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine