0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Investigation of Structural Response of Reinforced Concrete Beams Strengthened with Anchored FRPs

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: The Open Construction and Building Technology Journal, , n. 1, v. 7
Seite(n): 146-157
DOI: 10.2174/1874836801307010146
Abstrakt:

The beneficial effect of a composite material anchorage system (CMAS) upon the ductility and load capacity of reinforced concrete (RC) beams strengthened either with glass (GFRP) or carbon (CFRP) fabrics was investigated. The anchorage system consisted of U-shaped GFRP or CFRP strip (U-strip) at end of FRP. The U-strips were bonded around the beam section and further anchored by two tufts of glass fibres, each of them embedded at the opposite beam face and specifically in the region of compression zone of the beam web. Experimental evaluations in simply supported lightly reinforced concrete (RC) beams strengthened with one GFRP or a CFRP sheet anchored at its ends by the composite anchorage have shown that their bending capacity has increased by 8% and 17%, respectively, in relation to the capacity attained in similar RC strengthened beams without anchorage. On the other hand, their ductility was improved by an amount of 94% and 37%, respectively.

Copyright: © 2013 Constantinos B. Demakos, Constantinos C. Repapis, Dimitrios Drivas
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10384641
  • Veröffentlicht am:
    23.11.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine