0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Properties of Slag-Fly Ash Blended Geopolymer Concrete Reinforced with Hybrid Glass Fibers

Autor(en):
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 8, v. 12
Seite(n): 1114
DOI: 10.3390/buildings12081114
Abstrakt:

Geopolymer concrete is typically characterized by a brittle behavior and limited crack resistance. This study evaluates the performance of ambient-cured slag-fly ash blended geopolymer concrete reinforced with glass fibers. Two types of glass fibers were used exclusively or as a hybrid combination. The workability of glass fiber-reinforced geopolymer concrete was assessed using the slump, compaction factor, and vebe time. The compressive strength, splitting tensile strength, and modulus of elasticity were used to characterize the mechanical properties, while water absorption, sorptivity, abrasion resistance, and ultrasonic pulse velocity were employed in evaluating the durability. Experimental results showed that the slump and compaction factor decreased by up to 75% and 18%, respectively, with glass fiber addition but less significantly in mixes reinforced with hybrid fiber combinations. Meanwhile, the vebe time increased by up to 43%. Hybrid glass fibers led to superior mechanical and durability properties compared to plain mixes and those reinforced with a single type of glass fiber, even at higher volume fractions. The compressive strength, splitting tensile strength, and modulus of elasticity increased by up to 77%, 60%, and 85%, respectively. While the water absorption decreased by up to 42%, the sorptivity, abrasion resistance, and ultrasonic pulse velocity increased by up to 67%, 38%, and 280%, respectively. Analytical regression models were established to predict the mechanical and durability characteristics of glass fiber-reinforced slag-fly ash blended geopolymer concrete and were compared to those of design codes.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10688415
  • Veröffentlicht am:
    13.08.2022
  • Geändert am:
    10.11.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine