0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Research on the Settlement Regulation and Stability of Large Building Foundation over Gobs: a Case Study in the Xiangcheng Coal Mine, China

Autor(en): ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Shock and Vibration, , v. 2021
Seite(n): 1-17
DOI: 10.1155/2021/5533098
Abstrakt:

Due to the acceleration of urbanization in China, the land use and new building construction in mining subsidence areas are increasing. However, a large high-rise building (100 m × 80 m × 100 m) was planned to be built above gob areas in the Xiangcheng Mine subsidence area. According to the analysis of the borehole exploration data, borehole TV observations, and theoretical calculations, there were broken bedrock and developmental fractures in the fracture and caved zones above the gob areas. In addition, the depth affected by the building load is less than 9 m from the top of the fracture zone; thus, the stabilities of the gobs are low. Then, through the theoretical analysis of the space stress, compression settlement of foundation soil, and residual settlement of the gob and coal pillar under loads, combining the similar simulation study on settlement characteristics of foundation soil and gobs, the total settlement of the foundation can be regarded as the vector superposition of the compression settlement and residual settlement; then, the maximum settlement is calculated as 555 mm and the maximum tilt is 14.9 mm/m under the building load, which are greater than the permissible values of 200 mm and 2 mm/m, indicating that the foundation’s stability is inadequate. Therefore, the treatment measures of the deep pile group foundations in the soil layer and grouting reinforcement in the gobs were simultaneously put forward to effectively improve the stability of the building foundations.

Copyright: © 2021 Wenyan Guo, Bingnan Hu, Junying Zhang, Qingtong Chen, Xinguo Jia, Jianghua Li
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10676192
  • Veröffentlicht am:
    03.06.2022
  • Geändert am:
    03.06.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine