0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Sensor Self-diagnosis Using a Modified Impedance Model for Active Sensing-based Structural Health Monitoring

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Structural Health Monitoring, , n. 1, v. 8
Seite(n): 71-82
DOI: 10.1177/1475921708094792
Abstrakt:

The active sensing methods using piezoelectric materials have been extensively investigated for the efficient use in structural health monitoring (SHM) applications. Relying on high frequency structural excitations, the methods showed the extreme sensitivity to minor defects in a structure. Recently, a sensor self-diagnostic procedure that performs in situ monitoring of the operational status of piezoelectric (PZT) active sensors and actuators in SHM applications has been proposed. In this investigation, previously developed impedance models were revisited in order to investigate the effects of sensor and/or bonding defects on the admittance measurement. New parameters for sensor quality assessment of a PZT and coupling degradation effects between a PZT and bonding layer were incorporated into the traditional electromechanical impedance model for better estimation of the electromechanical impedance signatures and sensor diagnostics. The feasibility of the modified impedance model for sensor self-diagnosis using the admittance measurements was demonstrated by a series of parametric studies using a simple example of PZT-driven single degree of freedom spring-mass-damper system. This paper summarizes the description of the proposed modified electromechanical impedance model, parametric studies for impedance-based sensor diagnostics, and several issues that can be used as a guideline for future investigation.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.1177/1475921708094792.
  • Über diese
    Datenseite
  • Reference-ID
    10561588
  • Veröffentlicht am:
    11.02.2021
  • Geändert am:
    19.02.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine