Cement and Concrete Research - Januar 2015

Erschienen:	Januar 2015

Autor(en)	Titel	Seite(n)
Bundur, Zeynep Başaran / Kirisits, Mary Jo / Ferron, Raissa Douglas	Biomineralized cement-based materials: Impact of inoculating vegetative bacterial cells on hydration and strength	237-245
Ferretti, D. / Michelini, E. / Rosati, G.	Cracking in autoclaved aerated concrete: Experimental investigation and XFEM modeling	156-167
Yu, Linwen / François, Raoul / Dang, Vu Hiep / L'Hostis, Valérie / Gagné, Richard	Development of chloride-induced corrosion in pre-cracked RC beams under sustained loading: Effect of load-induced cracks, concrete cover, and exposure conditions	246-258
Mechtcherine, Viktor / Secrieru, Egor / Schröfl, Christof	Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars — Development of yield stress and plastic viscosity over time	52-65
Zhang, Yan-rong / Kong, Xiang-ming / Lu, Zhen-Bao / Lu, Zi-chen / Hou, Shan-Shan	Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes	184-196
Saafi, Mohamed / Tang, Leung / Fung, Jason / Rahman, Mahbubur / Liggat, John	Enhanced properties of graphene/fly ash geopolymeric composite cement	292-299
Paul, G. / Boccaleri, E. / Buzzi, L. / Canonico, F. / Gastaldi, D.	Friedel's salt formation in sulfoaluminate cements: A combined XRD and 27 Al MAS NMR study	93-102
Morandeau, A. / Thiery, M. / Dangla, P.	Impact of accelerated carbonation on OPC cement paste blended with fly ash	226-236
Krakowiak, Konrad J. / Wilson, William / James, Simon / Musso, Simone / Ulm, Franz-Josef	Inference of the phase-to-mechanical property link via coupled X-ray spectrometry and indentation analysis: Application to cement-based materials	271-285
Kong, Xiang-ming / Liu, Hui / Lu, Zhen-Bao / Wang, Dong-Min	The influence of silanes on hydration and strength development of cementitious systems	168-178
Kashef-Haghighi, Sormeh / Shao, Yixin / Ghoshal, Subhasis	Mathematical modeling of CO 2 uptake by concrete during accelerated carbonation curing	1-10
Bossa, Nathan / Chaurand, Perrine / Vicente, Jérôme / Borschneck, Daniel / Levard, Clément / Aguerre-Chariol, Olivier / Rose, Jérôme	Micro- and nano-X-ray computed-tomography: A step forward in the characterization of the pore network of a leached cement paste	138-147
Jeon, Dongho / Jun, Yubin / Jeong, Yeonung / Oh, Jae Eun	Microstructural and strength improvements through the use of Na2CO3 in a cementless Ca(OH)2-activated Class F fly ash system	215-225
Krakowiak, Konrad J. / Thomas, Jeffrey J. / Musso, Simone / James, Simon / Akono, Ange-Therese / Ulm, Franz-Josef	Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time	103-121
Huang, Qinghua / Jiang, Zhilu / Gu, Xianglin / Zhang, Weiping / Guo, Baohua	Numerical simulation of moisture transport in concrete based on a pore size distribution model	31-43
Sanchez, L. F. M. / Fournier, B. / Jolin, M. / Duchesne, Josée	Reliable quantification of AAR damage through assessment of the Damage Rating Index (DRI)	74-92
Mantellato, Sara / Palacios, Marta / Flatt, Robert J.	Reliable specific surface area measurements on anhydrous cements	286-291
Ma, Suhua / Li, Weifeng / Zhang, Shenbiao / Hu, Yueyang / Shen, Xiaodong	Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine	122-130
Dalas, Florent / Nonat, André / Pourchet, Sylvie / Mosquet, Martin / Rinaldi, David / Sabio, Serge	Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption	21-30
Trtnik, Gregor / Gams, Matija	Ultrasonic assessment of initial compressive strength gain of cement based materials	148-155

Autor(en)

Titel

Seite(n)

Bundur, Zeynep Başaran / Kirisits, Mary Jo / Ferron, Raissa Douglas

Biomineralized cement-based materials: Impact of inoculating vegetative bacterial cells on hydration and strength

237-245

Ferretti, D. / Michelini, E. / Rosati, G.

Cracking in autoclaved aerated concrete: Experimental investigation and XFEM modeling

156-167

Yu, Linwen / François, Raoul / Dang, Vu Hiep / L'Hostis, Valérie / Gagné, Richard

Development of chloride-induced corrosion in pre-cracked RC beams under sustained loading: Effect of load-induced cracks, concrete cover, and exposure conditions

246-258

Mechtcherine, Viktor / Secrieru, Egor / Schröfl, Christof

Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars — Development of yield stress and plastic viscosity over time

52-65

Zhang, Yan-rong / Kong, Xiang-ming / Lu, Zhen-Bao / Lu, Zi-chen / Hou, Shan-Shan

Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes

184-196

Saafi, Mohamed / Tang, Leung / Fung, Jason / Rahman, Mahbubur / Liggat, John

Enhanced properties of graphene/fly ash geopolymeric composite cement

292-299

Paul, G. / Boccaleri, E. / Buzzi, L. / Canonico, F. / Gastaldi, D.

Friedel's salt formation in sulfoaluminate cements: A combined XRD and 27 Al MAS NMR study

93-102

Morandeau, A. / Thiery, M. / Dangla, P.

Impact of accelerated carbonation on OPC cement paste blended with fly ash

226-236

Krakowiak, Konrad J. / Wilson, William / James, Simon / Musso, Simone / Ulm, Franz-Josef

Inference of the phase-to-mechanical property link via coupled X-ray spectrometry and indentation analysis: Application to cement-based materials

271-285

Kong, Xiang-ming / Liu, Hui / Lu, Zhen-Bao / Wang, Dong-Min

The influence of silanes on hydration and strength development of cementitious systems

168-178

Kashef-Haghighi, Sormeh / Shao, Yixin / Ghoshal, Subhasis

Mathematical modeling of CO 2 uptake by concrete during accelerated carbonation curing

1-10

Bossa, Nathan / Chaurand, Perrine / Vicente, Jérôme / Borschneck, Daniel / Levard, Clément / Aguerre-Chariol, Olivier / Rose, Jérôme

Micro- and nano-X-ray computed-tomography: A step forward in the characterization of the pore network of a leached cement paste

138-147

Jeon, Dongho / Jun, Yubin / Jeong, Yeonung / Oh, Jae Eun

Microstructural and strength improvements through the use of Na2CO3 in a cementless Ca(OH)2-activated Class F fly ash system

215-225

Krakowiak, Konrad J. / Thomas, Jeffrey J. / Musso, Simone / James, Simon / Akono, Ange-Therese / Ulm, Franz-Josef

Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time

103-121

Huang, Qinghua / Jiang, Zhilu / Gu, Xianglin / Zhang, Weiping / Guo, Baohua

Numerical simulation of moisture transport in concrete based on a pore size distribution model

31-43

Sanchez, L. F. M. / Fournier, B. / Jolin, M. / Duchesne, Josée

Reliable quantification of AAR damage through assessment of the Damage Rating Index (DRI)

74-92

Mantellato, Sara / Palacios, Marta / Flatt, Robert J.

Reliable specific surface area measurements on anhydrous cements

286-291

Ma, Suhua / Li, Weifeng / Zhang, Shenbiao / Hu, Yueyang / Shen, Xiaodong

Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine

122-130

Dalas, Florent / Nonat, André / Pourchet, Sylvie / Mosquet, Martin / Rinaldi, David / Sabio, Serge

Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption

21-30

Trtnik, Gregor / Gams, Matija

Ultrasonic assessment of initial compressive strength gain of cement based materials

148-155

Anzeige

Cement and Concrete Research - Januar 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Cement and Concrete Research - Januar 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.