Construction and Building Materials - Oktober 2023

Erschienen:	Oktober 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Cheng, Boyuan / Mei, Liu / Long, Wu-Jian / Kou, Shicong / Li, Lixiao / Geng, Songyuan	Ai-guided proportioning and evaluating of self-compacting concrete based on rheological approach	132522
Shi, Baocun / Liu, Quan / Gao, Yangming / Wu, Jiantao / Chen, Jingya	Analysis of the cohesion/adhesion proportion around bitumen-mineral failure interface under tensile loading	132555
Venkatesan, B. / Kannan, V. / Sophia, M.	Application potentials of conch shell powder as a bacterial carrier for enhancing the Micro-Mechanical performance of biogenic gypsum plaster	132561
Cárdenas-Pulido, Jhon / Carrillo, Julian / Reyes, Juan C. / Ramirez, Fernando	Backbone model for predicting the shear behavior of geopolymer panels under diagonal tension tests	132454
Dong, Hao / Wang, Jun	Carbon nanofibers and polyvinyl-alcohol fiber hybrid-reinforced high-performance concrete: Mechanical property, chloride penetration resistance, and material characterization	131891
Moro, Carlos / Francioso, Vito / Lopez-Arias, Marina / Velay-Lizancos, Mirian	CO2 curing of mortar with natural and recycled concrete aggregate: An environmental and economic assessment	132587
Adazabra, Aaron N. / Viruthagiri, G. / Yirijor, John	Combined effects of biomass bottom ashes and spent charcoal on characteristics of fired clay bricks	132570
Zhang, Hongen / Sarker, Prabir Kumar / Wang, Qingyuan / He, Bei / Kuri, Jhutan Chandra / Jiang, Zhengwu	Comparison of compressive, flexural, and temperature-induced ductility behaviours of steel-PVA hybrid fibre reinforced OPC and geopolymer concretes after high temperatures exposure	132560
Xu, Chao / Xue, Lei / Cui, Yuan / Zhai, Mengyang / Bu, Fengchang	Critical slowing down phenomenon for predicting the failure of solid rocks and cement mortar materials: Insight from acoustic emission multiparameters	132523
Huang, Huanghuang / Ren, Xu / Liu, Zhichao / Wang, Fazhou	Development of low-carbon and cost-effective ultra-high performance concrete using carbonated recycled fine aggregate	132575
Kütük-Sert, Tuba / Öztürk, Mehmet / Kütük, Sezai	Digital image processing of warm mix asphalt enriched with nanocolemanite and nanoulexite minerals	132542
Huang, Zhenyu / Pan, Weining / Du, Shilin / Zhou, Yingwu / Ye, Jianqiao	Dynamic splitting behavior of ultra-lightweight cement composite with rubber and polyethylene fiber	132577
Zou, Dinghua / Xiao, Lutong / Zhang, Yisheng / Li, Haiyan	Effect of hexadecyltrimethoxysilane modified micro silica particles on workability and compressive strength of ultra-high-performance concrete	132480
Wang, Rui / Chen, Hui / Bahia, Hussain U.	Effect of Multiple Aging-Rejuvenating Cycles (MARC) on critical rheological and fatigue properties of asphalt binder	132392
De Santis, Yuri / Aloisio, Angelo / Pasca, Dag Pasquale / Fragiacomo, Massimo / Dombrowski, Fabian	Evaluation of the shear size effect in glued laminated timber using a stochastic FE model calibrated on 17000 glue-line tests	132488
Gao, Qinglin / Xin, Haohui / Zhang, Youyou	Experimental investigation on transverse tension-tension fatigue behavior of pultruded glass-fiber reinforced polymer (GFRP) unidirectional lamina	132527
Li, Haotian / Li, Xuelong / Fu, Jianhua / Zhu, Ningqiang / Chen, Deyou / Wang, Yong / Ding, Sheng	Experimental study on compressive behavior and failure characteristics of imitation steel fiber concrete under uniaxial load	132599
Saberi K., Farshad / Wang, Yizhuang David / Liu, Jenny	Improving rheological and thermal performance of Gilsonite-Modified binder with phase change materials	132557
Elbelbisi, Ahmed / El-Sisi, Alaa / Knight, Jonathan / Caleb Philipps, Joseph / Newberry, Michael / Salim, Hani	Influence of panels size on the static and dynamic performance of laminated glass panels	132562
Zhang, Yu / Yang, Lin / Qian, Rusheng / Liu, Guojian / Zhang, Yunsheng / Du, Hongjian	Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically	132424
Chaimongkhol, Chananun / Medepalli, Satya / Zheng, Yuqian / Matsuda, Taku / Ishida, Tetsuya / Wang, Tiao	Investigating the effects of cracks and low-calcium supplementary cementitious materials on steel fiber corrosion in cement paste	132554
Azadeh, A. / Quiroga Flores, A. / Ghavami, K. / Barbosa, N. P. / Toledo Filho, R. D. / Junior, H. Savastano	An investigation of bamboo shear test methods and the influence of heat on bamboo shear strength	132586
Xiamuxi, Alifujiang / Aosimanjiang, Abudureyimujiang / Yang, Bin	Loading performance of reinforced and recycled aggregate concrete-filled circular steel tube short column with different steel ratios	132486
Wie, Young Min / Hyuck Lee, Kang / Lee, Ki Gang / Park, Jaehyeoung / Ko, Taehoon / Lee, Kang Hoon	Manufacture of artificial lightweight aggregates recycled from anaerobic digested sewage sludge and process optimization by machine learning modeling techniques	132502
Wang, Ning / Zhang, Chao / Ma, Tao / Nadimi, Sadegh / Chen, Feng / Ding, Xunhao	Mechanical insights into the behavior of cement stabilized aggregates during compaction and failure using smart aggregate: Experiments and DEM simulations	132504
Los Santos - Ortega, Jorge / Fraile - García, Esteban / Ferreiro - Cabello, Javier	Methodology for the environmental analysis of mortar doped with crumb rubber from end-of-life tires	132519
Cai, Jingxuan / Zhou, Jinghong / Liu, Cheng / Mei, Kaiyuan / Zhang, Chunmei / Cheng, Xiaowei	Microencapsulated phase change material-cement composites for cementing the natural gas hydrate layer	132591
Hoon Rhee, Jeong / Gwon, Seongwoo / Sim, Sungwon / Kim, Gun	Mitigating self-desiccation of cement composites via cellulose microfibers: Evidence of the microscopic behavior	132585
Liu, Yangqing / Wu, Bo / Qiu, Jishen	A new fiber-bridging constitutive model for quantifying the matrix carbonation and fiber-to-matrix interface healing in PVA fiber-reinforced SHCC	132548
Patalas, Filip / Brol, Janusz / Nowak, Tomasz P.	Numerical analysis, experimental tests and non-linear analytical models in the study of bent timber beams reinforced with FRP strips	132531
Han, Xiaoyu / Yan, Jiachuan / Chen, Tiefeng / Tang, Boyang / Lin, Yini	Plastic shrinkage of 3D printed concrete under different self-weight of upper layers	132564
Chen, Peiyuan / Wang, Chunjie / Wang, Yonghui / Xie, Jiankai / Shen, Xin / Wang, Cheng / Wang, Jialai	Pre-carbonation of calcium carbide slag for the preparation of eco-friendly mortars	132541
Guan, Xi / Wang, Fuyun / Ren, Qiang / Zheng, Youzhi / Mei, Kai yuan / Zhang, Chunmei / Cheng, Xiaowei	Preparation and mechanism of tartaric acid-intercalated hydrotalcite retarder for oil-well cement	132580
Kumanan, T. S. / Sofi, A.	Progression of bio-modified adobes with derivatives of cassava periderm and clay brick waste by experimental and probabilistic prediction models	132535
Li, Bo / Qin, Jiefa / Li, Qiu / Chen, Wei / Cao, Hailin / Guo, Yue	Promoting the dissolution of slag in blended cement via adding polyaluminum sulfate and controlling the inner spatial zonation	132543
Tesic, Ksenija / Baričević, Ana / Serdar, Marijana / Gucunski, Nenad	Quantifying the impact of parameters of chloride-induced reinforcement corrosion on the GPR signal	132594
Siahkouhi, Mohammad / Wang, Junyi / Han, Xiaodong / Aela, Peyman / Ni, Yi-Qing / Jing, Guoqing	Railway ballast track hanging sleeper defect detection using a smart CNT self-sensing concrete railway sleeper	132487
Zhao, Zenggang / Wu, Shaopeng / Xie, Jun / Yang, Chao / Yang, Xinkui / Chen, Shuaichao / Liu, Quantao	Recycle of waste tire rubber powder in a novel asphalt rubber pellets for asphalt performance enhancement	132572
Li, Xiaoya / Zhang, Renbo / Jin, Liu / Du, Xiuli	Refinement simulation of bond-slip performance of deformed reinforced concrete exposed to fire: Parametric analysis	132558
Mojibi, M. S. / Shariq, M. / Masood, A. / Mahdi, F. / Abbas, H.	Residual load capacity of HVFA reinforced concrete after elevated temperature heating: Experimental and analytical study	132569
Binega Yemesegen, Eden / Memari, Ali M.	A review of experimental studies on Cob, Hempcrete, and bamboo components and the call for transition towards sustainable home building with 3D printing	132603
Cota, Tiany Guedes / Cheloni, Letícia Maria de Melo Silva / Guedes, Jhonny José Magalhães / Reis, Érica Linhares	Silico-manganese slag and its utilization into alkali-activated materials: A critical review	132589
Liu, Xiaoyu / Zhang, Huimei / Luo, Shenghu	Size effect model of nominal tensile strength with competing mechanisms between maximum defect and fracture process zone (CDF model) for quasi-brittle materials	132538
Zeynali, Yasaman / Niroumand, Hamed / Moayed, Reza Ziaie	Stabilizing cohesive soils with Micro- and Nano- fly ash as Eco-friendly Materials: An experimental study	132490
Meng, Lingqi / Ding, Yahong / Li, Lei / Wei, Jiuqi / Li, Mingzhe / Wang, Junlei / Cao, Shaohua / Liu, Jingbiao	Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC)	132526
Yang, Siyu / Chen, Chuxin / Li, Wenting / Liu, Sifeng	Study on the effect of 5/20 and 20/80 °C temperature cycle curing regimes on the properties of polyacrylate dispersion-modified cement mortar	132520
Wang, Chengaonan / Chen, Mu / Wang, Yansong	Surface flaking mechanism of stone components of ancient building complex in Wudang Mountain, China	132611
Zhu, Zhaorong / Lu, Yiyan / Zhou, Man	Surface modification of recycled tire rubber powders with Tannic acid and Nano-TiO2 for enhanced performance and photocatalytic properties of Rubberized Cement-Based materials	132607
Chauhan, Babu Lal / Singh, Gyani Jail	Sustainable development of recycled concrete aggregate through optimized acid-mechanical treatment: A simplified approach	132559
Zhao, Bingxun / Yao, Kai / Wu, Libo / Fan, Yufeng / Sun, Zhuang / Wang, Yue-Sheng	Theoretical and experimental study on the effect of stress corrosion on magnetic flux leakage signals	132461
Chéruel, Anthony / Ben Ftima, Mahdi	Unrestrained ASR volumetric expansion for mass concrete structures: Review and experimental investigation using 3d laser scanning	132565
Gencel, Osman / Nodehi, Mehrab / Bozkurt, Ahmet / Sarı, Ahmet / Ozbakkaloglu, Togay	The use of computerized tomography (CT) and image processing for evaluation of the properties of foam concrete produced with different content of foaming agent and aggregate	132433
Villaquirán-Caicedo, Mónica A. / Fernández-González, Alejandro / Fernández-García, Daniel A. / Mejía de Gutiérrez, Ruby	Valorization of a low-quality coal ash, in the preparation of alkali activated inks for applications in 3D additive manufacturing	132598
Palacio, Oriana / Malfait, Wim J. / Michel, Silvain / Barbezat, Michel / Mazrouei-Sebdani, Zahra	Vibration and structure-borne sound isolation properties of silica aerogels	132568

Über diese
Datenseite
IssueID
70414
Veröffentlicht am:
01.09.2023
Geändert am:
01.09.2023

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.