Construction and Building Materials - Oktober 2023

Erschienen:	Oktober 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Xu, Lichao / Ruan, Xin / Fang, Tao / Wei, Yi / Li, Yue	3D morphology reconstruction-based modelling and mechanical degradation study of corroded low alloy steel specimens	132649
Tran, Thai Son / Nguyen, Son Dong / Lee, Hyun Jong / Tran, Van Phuc	Advanced crack detection and segmentation on bridge decks using deep learning	132839
Seo, Joonho / Kim, Naru / Yang, Beomjoo / Kim, G. M.	Alterations in the reaction properties of Portland cement against coupled deteriorations of magnesium and sulfate upon carbonation curing	132806
Wang, Jiawei / Han, Yifeng / Cao, Zhenglong / Xu, Xiyong / Zhang, Jiake / Xiao, Feipeng	Applications of optical fiber sensor in pavement Engineering: A review	132713
Oyebisi, Solomon / Alomayri, Thamer	Artificial intelligence-based prediction of strengths of slag-ash-based geopolymer concrete using deep neural networks	132606
Antolik, A. / Jóźwiak-Niedźwiedzka, D.	ASR induced by chloride- and formate-based deicers in concrete with non-reactive aggregates	132811
Capitão, Silvino / Picado-Santos, Luís / Almeida, Arminda / Mendes, Fábio	Assessment of aged and unaged hot and warm asphalt concrete containing high reclaimed asphalt pavement rate rejuvenated with waste cooking oil	132801
Sanchez, M. / Navacerrada, M. A. / Fort, R. / Barbero-Barrera, M. M.	Assessment of limestone cladding deterioration due to crystallisation of salts by non-destructive techniques	132640
Chang, Qiuhao / O'Rear, Edgar A. / Ghos, Sagar / Zaman, Musharraf / Huang, Liangliang / Wu, Xingru	An atomistic model of aged asphalt guided by the oxidation chemistry of benzylic carbon with application to asphalt rejuvenated with a triglyceride	132743
Chen, Zhijun / Huang, Liang / Yan, Libo / Cai, Heng / Luo, Xiaofeng / Li, Yin	Autoclaved steel slag coarse aggregate: A potential solution for sustainable concrete production	132627
Wang, Chenxia / Zhou, Yangsheng / Cao, Fubo / Su, Tian / Wang, Fangying	Bond behavior between section steel and concrete in partially encased composite structural members	132521
Shabani, Erfan / Mostofinejad, Davood / Saljoughian, Alireza	Bond behavior of prestressed FRP sheet-concrete joints: Comparison of EBROG and EBR methods	132752
Makashev, Kuanysh / Triantafyllou, Savvas P. / Thermou, Georgia E. / Tizani, Walid	Bond behaviour of light and heavy carbon fibre TRM to masonry interfaces	132508
Lu, Zhongyu / Zhao, Chenyang / Zhao, Jinxia / Shi, Cuiqing / Xie, Jianhe	Bond durability of FRP bars and seawater–sea sand–geopolymer concrete: Coupled effects of seawater immersion and sustained load	132667
Liu, Qizhou / Li, Jinzhou / Li, Mingfa / Wu, Xuankun / Li, Yinchu / Zhang, Lu	Bond performance prediction model of defective grout in post-fire sleeve connections under cyclic loading	132442
Jian, Xiangyang / Zhao, Zhongwei / Jin, Zeyuan / Wang, Bin / Liang, Bingbei	Bond–slip behavior of steel and fiber fabric based on experiment and numerical method	132799
Wu, Wenda / Wang, Tao / Gong, Qingnan / Zhang, Kaijian / An, Xiaopeng / Wang, Dehui	Characteristics of the alkali-silica reaction in seawater and sea sand concrete with different water-cement ratios	132822
Ren, Dongya / Xu, Jie / Su, Shaonan / Tian, Gangsheng / Chen, Xu / Zhang, Allen / Ai, Changfa	Characterization of internal pore size distribution and interconnectivity for asphalt concrete with various porosity using 3D CT scanning images	132751
Yu, Weixiao / Wang, Sudi / Miao, Yinghao	Characterizing force-chain network in aggregate blend using discrete element method and complex network theory	132724
Chen, Chunhong / Wang, Lei / Liu, Ronggui / Zhu, Pinghua / Liu, Hui / Wang, Xinjie / Yu, Jiang / Chen, Yunchun	Chloride penetration of concrete exposed to dry-wet cycle with various dry-wet ratios and temperature	132883
Ashish, Prabin Kumar / Sreeram, Anand / Xu, Xiong / Chandrasekar, Pavan / Jagadeesh, Ajayshankar / Adwani, Dheeraj / Padhan, Rabindra Kumar	Closing the Loop: Harnessing waste plastics for sustainable asphalt mixtures – A comprehensive review	132858
Aker, Saed N. A. / Ozer, Hasan	Cold recycling mix design approach targeting permanent deformation resistance	132704
Yoo, Sun-Jae / Yuan, Tian-Feng / Choi, Jin-Seok / Yoon, Young-Soo	Comparative bond-slip response of ribbed CFRP bar to UHPC after exposure to high temperature	132583
Li, Chen / Qin, Wen / Fu, Zhen / Dai, Jiasheng / Ma, Feng	Comparative evaluation on decay process of asphalt-aggregate interfaces under solution erosion	132698
Aurelie Tchouateu Kamwa, Rolande / Tchadjie Noumbissie, Leonel / Tome, Sylvain / Idriss, Eguekeng / Nemaleu, Juvenal Giogetti Deutou / Tommes, Birgit / Woschko, Dennis / Janiak, Christoph / Etoh, Marie-Annie	A comparative study of compressed lateritic earth bricks stabilized with natural pozzolan-based geopolymer binders synthesized in acidic and alkaline conditions	132652
Li, Ning / Unluer, Cise	A comparative study of ethylenediamine tetraacetic acid induced gas-solid and liquid-solid accelerated carbonation for enhancement of steel slag aggregates	132539
Liu, Gang / Zhao, Mingzhi / Liu, Kaiwen / Connolly, David P. / Jiang, Xin / Zhang, Lei	Comparative study of performance of wicking and conventional railway geotextiles under the synergetic simulation of train loads and flooding	132840
Zhang, Tong / Wen, Qianxin / Gao, Shan / Tang, Jupeng	Comparative study on mechanical and environmental properties of coal gangue sand concrete	132646
Giammaria Praticò, Filippo / Perri, Giusi / De Rose, Manuel / Vaiana, Rosolino	Comparing bio-binders, rubberised asphalts, and traditional pavement technologies	132813
Wang, Yukui / He, Zhenxing / Wang, Kaiyun / Bai, Yanbo / Li, Penghao	Comparing dynamic performance between new sleeper-damping and floating-slab track system	132588
Zhang, Yi / Zhu, Yanmei / Ren, Qiang / He, Bei / Jiang, Zhengwu / Van Tittelboom, Kim / De Schutter, Geert	Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials	132750
Lin, Xu / Wang, Min / Yan, Kezhen	Comparison on the performance of solid coumarone-indene resin and liquid coumarone-indene resin modified asphalt	132629
Sun, Guoqing / Hu, Zhe / Zhang, Jiupeng / Xue, Hengxiao	Comprehensive evaluation of ballastless-track sealants based on macro–micro tests and principal component analysis	132708
Duan, Chong-da / Yu, Xue-yang / Yao, Xiao-wei / Zhu, Jia-hua / Li, Guang-yue	Coupling reinforcement of uranium tailings via Klebsiella-induced calcium carbonate precipitation and waterborne polyurethane	132641
Shi, Can / Zhou, Yu / Xu, Lei / Zhang, Xu / Guo, Yunlong	A critical review on the vertical stiffness irregularity of railway ballasted track	132715
Li, Yongliang / Bian, Yanan / Liu, Chenhui	Damage and failure mechanism of basalt fiber-reinforced gangue-cemented backfill under uniaxial compression	132872
Ottenhaus, Lisa-Mareike / Yan, Zidi / Brandner, Reinhard / Leardini, Paola / Fink, Gerhard / Jockwer, Robert	Design for adaptability, disassembly and reuse – A review of reversible timber connection systems	132823
Vranešić, Katarina / Lakušić, Stjepan / Serdar, Marijana / Alar, Vesna	Detrimental effect of stray current on rails and fastening systems in urban railway tracks	132645
Liu, Wenhuan / Zhao, Zhongzhong / Wan, Yongfeng / Hu, Jing / Lei, Fan / Wang, Siying / Li, Hui	Development and application of lead smelting slag eco-cementitious material: Synergistic excitation regulation and heavy metal solidification	132843
Wu, Huixia / Liang, Chaofeng / Yang, Dingyi / Ma, Zhiming	Development of sustainable geopolymer materials made with ground geopolymer waste powder as renewable binder up to 100%	132746
Shahbazi, R. / Habibnejad Korayem, A. / Bazli, M.	Dispersion of hydrophobic waste amorphous carbon powder in cementitious environment and its effect on the permeability of cement paste	132888
Wang, Cong / Zhang, Peng / Guo, Jinjun / Wang, Juan / Zhang, Tianhang	Durability and microstructure of cementitious composites under the complex environment: Synergistic effects of nano-SiO2 and polyvinyl alcohol fiber	132621
Nemade, Pushkraj Anil / Pasla, Dinakar / Chandrappa, Anush K.	Durability assessment of concrete with natural and Linz Donawitz slag as coarse aggregates	132617
Liu, Zhihua / Gan, Liqin / Rong, Hui	Durability of concrete exposed to laboratory-simulated marine microbe-induced corrosion	132563
Sobhani, J. / Komijani, S. / Shekarchi, M. / Ghazban, F.	Durability of concrete mixtures containing Iranian electric arc furnace slag (EAFS) aggregates and lightweight expanded clay aggregates (LECA)	132597
Medina, Darío Flores / Carolina Hernández Martínez, M. / Flores Medina, Nelson / Hernández-Olivares, F.	Durability of rubberized concrete with recycled steel fibers from tyre recycling in aggresive enviroments	132619
Yıldırım, Musa / Ozhan, Hacer Bilir	Durability properties of basalt fiber-reinforced mortars with different mineral admixtures exposed to high temperatures	132574
Sözen, Şahin / Yıldız, Okay	Early estimation of 28-day compressive strength of mortars using regression and neural network-based models	132789
Trambitski, Yahor / Kizinievič, Olga / Gaspar, Florindo / Kizinievič, Viktor / Valente, Joana F. A.	Eco-friendly unfired clay materials modified by natural polysaccharides	132783
Parmo, Parmo / Hanus, Jean-Luc / Belayachi, Naima / Bailly, Patrice	Effect of aggregate/binder ratio on mechanical and energy absorption properties of a straw-lime composite material	132613
Lu, Ting / Wei, Zuoan / Hesham El Naggar, M. / Wang, Wensong / Yang, Yonghao / Tian, Xi / Guo, Hongwei	Effect of chemical environment on copper tailings reinforced by microbially induced carbonate precipitation	132894
Nemati, Manouchehr / Nematzadeh, Mahdi / Rahimi, Sepideh	Effect of fresh concrete compression technique on pre- and post-heating compressive behavior of steel fiber-reinforced concrete: Experiments and RSM-based optimization	132786
Shangguan, Minghui / Xie, Youjun / Wang, Fan / Long, Guangcheng / Tang, Zhuo / Chen, Yue / Xu, Shengqiao / Li, Hui / Gao, Ce / Liu, Mengjing	Effect of low-vacuum environment on the strength and permeability of cement-based materials	132676
Ali, Suha Ismail Ahmed / Lublóy, Éva	Effect of metakaolin and boron-carbide on the properties of magnetite, basalt and quartz concrete at different elevated temperatures	132593
Du, Wei / Liu, Bo / Zuo, Danying / Wu, Mingli / Li, Hongjun / Ba, Mingfang / Liu, Junzhe / Lin, Runsheng / Liu, Quantao	Effect of microcapsules on the self-repairing ability of limestone calcined clay cement (LC3) mortar at different temperatures	132718
Liu, Jin / Ran, Yinhong / Zarei, Mohammad / Tabasi, Ehsan / Naseri, Alireza / Worya Khordehbinan, Mohammad	Effect of nano molybdenum disulfide (Nano-MoS2) on fracture behavior of Warm mix asphalt (WMA)	132820
Du, Longyu / Zhou, Jiehang / Lai, Jianzhong / Wu, Kai / Yin, Xuexiang / He, Yuanyuan	Effect of pore structure on durability and mechanical performance of 3D printed concrete	132581
Yao, Hongru / Wang, Qiang / Zhang, Zhen / Zhou, Xiaolong / Cao, Yadong	Effect of styrene–butadiene–styrene triblock copolymer structure on the rheological properties of high content SBS polymer modified asphalts	132738
Wu, Jiangyuan / Huang, Yuxiang / Hu, Juan / Lei, Wencheng / Wang, Xiaoxia / Zhang, Yahui / Yu, Wenji	Effects of density and resin content on the rebonding performance of bamboo scrimber composite	132848
Xu, Xiaoxing / Yuan, Yong / Wang, Siqi / Zhang, Dehong / Zhu, Hongping	Effects of structural symmetry of introduced polyether diol on low temperature tolerance of laminated polyurethane bearings in bridges	132688
Kumar Dash, Pankaj / Kumar Parhi, Suraj / Patro, Sanjaya Kumar / Panigrahi, Ramakanta	Efficient machine learning algorithm with enhanced cat swarm optimization for prediction of compressive strength of GGBS-based geopolymer concrete at elevated temperature	132814
Ospitia, Nicolas / Tsangouri, Eleni / Pourkazemi, Ali / Wang, Qinjian / Keshavarzi, MohammaSadegh / Stiens, Johan H. / Aggelis, Dimitrios G.	Elastic and electromagnetic monitoring of TRC sandwich panels in fracture under four-point bending	132824
Geng, Zhi / Liu, Yongqi / Shi, Jinjie	Electrochemical responses of carbon steel in ordinary Portland cement blended with calcium sulfoaluminate cement	132788
Thomoglou, Athanasia K. / Falara, Maria G. / Voutetaki, Maristella E. / Fantidis, Jacob G. / Tayeh, Bassam A. / Chalioris, Constantin E.	Electromechanical properties of multi-reinforced self-sensing cement-based mortar with MWCNTs, CFs, and PPs	132566
Shukla, Manoj Kumar / Walia, Ashish / Purohit, Vedant / Vyas, Vidhi / Singh, Gagandeep	Establishment of best practices for laboratory evaluation of stabilized base layers and comparative study on influence of different types of stabilizers	132691
Jiao, Bozong / Pan, Baofeng / Liu, Fei / Yin, Peng / Li, Zihan	Evaluating the interfacial properties between crumb rubber modified asphalt and aggregates using molecular dynamics simulation methods	132809
Teixeira, Jamilla Emi Sudo Lutif / Amaecing Junior, Carlos Martins / Ribeiro de Rezende, Lilian / Castelo Branco, Verônica Teixeira Franco / Kim, Yong-Rak	Evaluation of asphalt concrete’s fatigue behavior using cyclic semi-circular bending test	132772
Zhu, Anyou / Wu, Hanli / Wang, Yizhuang David / Liu, Jenny	Evaluation of feasibility and performance of foamed Fire-Resistant coating materials	132692
Reza Keymanesh, Mahmoud / Amani, Saeed / Omran, Ali Taghinezhad / Karimi, Mohammad M.	Evaluation of the impact of long-term aging on fracture properties of warm mix asphalt (WMA) with high RAP contents	132671
Yu, Huanan / Zhou, Sihang / Qian, Guoping / Zhang, Chao / Shi, Changyun / Yao, Ding / Ge, Jinguo	Evaluation of the microscale structure and performance of asphalt mixtures under different design methods	132810
Jaczewski, Mariusz / Pszczola, Marek / Alenowicz, Jacek / Rys, Dawid / Dolzycki, Bohdan / Jaskula, Piotr	Evaluation of thermal cracking probability for asphalt concretes with high percentage of RAP	132726
Zhu, Linlin / Zheng, Mulian / Zhang, Wei / Chen, Wang / Ou, Zhongwen	Evolution and mechanism on shrinkage of high-performance concrete with full aeolian sand cured by superabsorbent polymer	132846
Grzesiak, Szymon / Schultz-Cornelius, Milan / Pahn, Matthias	Experimental and analytical evaluation of externally bonded BFRP and CFRP strips on the load-bearing behaviour of reinforced concrete structures using distributed fibre optic sensing	132452
Cao, Xiangpeng / Yu, Shiheng / Cui, Hongzhi	Experimental study of the in-situ rebar splicing technique to reinforce 3D-printed concrete in vertical directions	132756
He, Bin / Qin, Xinhao / Zhou, Zhiqiang / Xu, Bin / Yu, Songling / Qin, Guanglei / Liu, Kun / Peng, Xiaochuang / Nie, Xiaoqing / Ma, Fuli / Ma, Yingjian / Han, Pengju / Bai, Xiaohong	Experimental study on composite flocculant-electroosmosis combined with segmented solidification treatment of high-water-content slurry	132729
Mao, Hao / Guan, Biao / Jing, Chenchen / Lv, Jianguo / Xu, Tianqiu / Fu, Rui / Ling, Xue / Liu, Changmeng	Experimental study on mechanical properties and bond behavior of wire and arc additive manufacturing steel bar	132836
Zarzuela, Rafael / Cervera, Jaime J. / Moreno, Ignacio / Gil, M. L. Almoraima / Mosquera, María J.	Exploring the low cell adhesion of photoinduced superhydrophilic surfaces for improving the effect of antifouling protective coatings on porous building materials	132573
Xia, Qian / Guo, Chaoxia / Li, Yiqing / Liu, Taikang / Liu, Junjun	Fatigue characteristics of ancient brick masonry under cyclic load	132653
Eshetu Deresse, Nuhamin / Sarem, Mina / Nasser, Hussein / François, Stijn / Verstrynge, Els	Fatigue fracture quantification in brittle cementitious materials using acoustic emission testing and digital image correlation	132635
Meng, Lingkai / Shi, Zhifei / Hao, Shengwang / Cheng, Zhibao	Filtering property of periodic in-filled trench barrier for underground moving loads	132655
Katlav, Metin / Turk, Kazim / Turgut, Paki	Flexural performance of V-shaped RC folded plates: The role of plate thickness and fiber hybridization	132815
Yoon, Jinyoung / Kim, Hyunjun / Ju, Suhwan / Li, Zhanzhao / Pyo, Sukhoon	Framework for rapid characterization of fresh properties of cementitious materials using point cloud and machine learning	132647
Woo, Byeong-Hun / Ryou, Jae-Suk / Kim, Joo Young / Lee, Binna / Kim, Hong Gi / Kim, Jee-Sang	Freeze-thaw durability estimation for concrete through the Gaussian process regression with kernel convolution	132825
Kia, Alalea	Freeze-thaw durability of air-entrained high-strength clogging resistant permeable pavements	132767
Liang, Yan / Song, Hongfang	Frost stochastic damage meso-equivalence method of concrete with freeze–thaw cycles	132359
Xie, Zonglin / Yuan, Qiang / Yao, Hao / Zhong, Fuwen / Jiang, Mengjie	Hardened properties and microstructure change of sulphoaluminate cement modified with different doses of styrene-butadiene rubber latex	132618
Sun, Xuesong / Li, Yanjun / Wei, Xinlei / Yu, Jianwen / Wang, Mingxing	High contents of steel slag in the road concrete: Hydration mechanism, mechanical property and durability performance	132703
Zakeremamreza, Amin / Kianifar, Mohammad E. / Chibuisi, Chidera / Ahmadi, Ehsan / Salami, Mohammad R.	A high-performance rubberised alkali-activated mortar for repair of RC beams	132610
Maldonado-Alameda, A. / Mañosa, J. / López-Montero, T. / Catalán-Parra, R. / Chimenos, J. M.	High-porosity alkali-activated binders based on glass and aluminium recycling industry waste	132741
Yuan, Yan / Chen, Hongyu / Wang, Yefei / Xu, Song / Xue, Bin / Zou, Guilian / Wang, Bin	How calcium and magnesium ions affect the stability of asphalt with anionic emulsifiers: A molecular dynamics study	132770
Roy, Nabanita / Mondal, Purbayan Ghosh / Kuna, Kranthi Kumar	Image-based indices of aggregates for predicting the initial skid resistance of bituminous pavements	132776
Rondinella, Fabio / Daneluz, Fabiola / Hofko, Bernhard / Baldo, Nicola	Improved predictions of asphalt concretes’ dynamic modulus and phase angle using decision-tree based categorical boosting model	132709
Shi, Xinxin / Ning, Baokuan / Wang, Junxiang / Cui, Taotao / Zhong, Mingyang	Improving flexural toughness of foamed concrete by mixing polyvinyl alcohol-polypropylene fibers: An experimental study	132689
Chen, Meng / Wang, Guangquan / Zhang, Tong / Ma, Mingyang / Tang, Shubin / Zhang, Yao	Improving the dynamic splitting properties of engineered cementitious composites using hybrid synthetic polymer and recycled steel fibres	132567
Amini, Amir / Akrami, Masoud	Improving the performance and rheological properties of RAP binders using gilsonite/nanoclay and softer binder	132797
Kassu, Aschalew	An in situ real-time monitoring of the hydration and dehydration of building gypsum: Conventional and standoff Raman spectroscopy coupled with chemometrics analysis	132682
Wang, Yuanxia / Liu, Nazhen / Liu, Xiangju / Liu, Xinyu / Sun, Congtao / Chen, Xuwei / Hou, Baorong	In-situ monitoring of pH and Cl− concentration and rebar corrosion at the rebar/mortar interface	132712
Hassan, Waqas / Alshameri, Badee / Jamil, Syed Muhammad / Maqsood, Zain / Haider, Abbas / Shahzad, Arfan	Incorporating potassium-rich waste material in a sustainable way to stabilize dispersive clay: A novel practical approach for the construction industry	132717
Michelini, E. / Ferretti, D. / Pizzati, M.	The influence of density on the fracture energy of AAC: From experimental investigation to the calibration of a cohesive law	132547
Fares, Ali Issa / Sohel, Kazi Md Abu / Al-Jabri, Khalifa / Al-Saidy, Abdullah	Influence of ferrochrome slag as coarse and fine aggregates on thermal and strength properties of concrete at high temperatures	132807
Amani, Saeed / Jahanbakhsh, Hamid / Karimi, Mohammad M.	Influences of induced heating-healing on fracture properties and life extension of asphalt mixtures: Experimental investigations	132785
Lu, Yi / Xu, Changhao / Baghbani, Abolfazl	Initial state of excavated soil and rock (ESR) to influence the stabilisation with cement	132879
Liao, Xiaolong / Yan, Qixiang / Zhang, Yifeng / Zhong, Haojia / Qi, Mingshan / Wang, Chunkai	An innovative deep neural network coordinating with percussion-based technique for automatic detection of concrete cavity defects	132700
Zhou, Li / Zhang, Tianqi / Luo, Yanyun	Insights of the vehicle-track-girder system dynamic response changes caused by the thermal deformation of CRTS III ballastless track in the natural environment	132745
Chen, Chen / Hu, Yongbiao / Jia, Feng / Wang, Xuebin / La, Xiaoyang / Zhang, Ruwei / Xu, Jindong	Intelligent compaction quality evaluation using Morse wavelet transform and deep neural network	132697
Zhang, Chuan / Yan, Qixiang / Zhang, Yifeng / Liao, Xiaolong / Zhong, Hanqing	Intelligent monitoring of concrete-rock interface debonding via ultrasonic measurement integrated with convolutional neural network	131865
Ziaee, Seyed Ali / Fatemi, Saeed / Zarei, Mohammad / Fini, Elham H.	Introduction of calcium lignosulfonate to delay aging in bituminous mixtures	132798
Nie, Xinxin / Yin, Qian / Wang, Qi / Ren, Minghui / Deng, Tianci / Jing, Hongwen / Zhang, Qiang / Wu, Jiangyu	Investigating mechanical properties of cemented gangue backfill materials subjected to static-dynamic combined loads	132674
Ding, Jianzhao / He, Sihong / Huang, Renle / Xiao, Liang / Mei, Guoxiong	Investigating the chloride ion resistance of cracked concrete through Reverse-seepage and Saturation based Action Anti-corrosion Tech (RS-AAT): Experimental and numerical analysis	132639
Maleki Toulabi, Hossein / Hosseini, Seyed Azim / Haj Najafi, Leila	Investigating the effect of using recycled waste concrete powder (RWCP) on the performance of thin layer surface treatment: Microsurfacing	132734
Sengul, Tayfun / Akray, Noyan / Vitosoglu, Yasar	Investigating the effects of stabilization carried out using fly ash and polypropylene fiber on the properties of highway clay soils	132590
Zhang, Fengqiao / Yang, Yuguang / Hendriks, Max A. N.	Investigation of concrete crack kinematics through probability density field of the location of acoustic emission events	132595
Jin, Tian / Liu, Liping / Yang, Ruikang / Sun, Lijun / Yuan, Jiang	Investigation of interlayer bonding performance between asphalt concrete overlay and Portland cement concrete using inclined shear fatigue test	132681
Xue, Kairu / Su, Mengwei / Yang, Xin / Qi, Jingqin / Liu, Mingyuan / Ju, Chenggong / Peng, Xiao / Wu, Yan	Investigation of the water resistance of non-sintered wrap-shell lightweight aggregates with high content solid waste and its application in water permeable bricks	132612
Luan, Yingcheng / Ma, Yuan / Ma, Tao / Xia, Fei	Investigation on the effects of physical property and stress state of graded crushed stone on resilient modulus and permanent deformation	132628
Huang, Weiqi / Liu, Liping / Li, Mingchen / Gao, Li	Investigation on the influence of conditioning time on the performance of hot-recycled mixture under ambient temperature	132838
Meng, Yan / Ouyang, Jian / Ou, Jinping	Investigation on the wetting behavior of asphalt emulsion on aggregate for asphalt emulsion mixture	132844
Corraliza, S. / Pasandín, A. R. / Pérez, I. / Delgado, C.	Laboratory evaluation of environmentally friendly alternative mineral powders for micro-surfacing treatments manufacture	132683
Khankhaje, Elnaz / Kim, Taehoon / Jang, Hyounseung / Rafieizonooz, Mahdi	Laboratory evaluation of heavy metal removal from stormwater runoff by pervious concrete pavement containing seashell and oil palm kernel shell	132648
Škulteckė, Judita / Vaitkus, Audrius / Šernas, Ovidijus	Laboratory investigation on the use of wood waste fibres in SMA mixtures	132727
Yang, Xiaolong / Feng, Yumeng / Rong, Hongliu / Liang, Junlin / Zhang, Guoming / Huang, Ying	The leaching-deterioration properties and leaching mechanism of cement mortar under dry-wet cycles	132672
Abul Hashem, Md. / Hasan Zahin, Md. Enamul / Haque, Md. Sanaul / Milu, Md. Shohag / Anik Hasan, Md. / Payel, Sofia	Leather shaving dust utilization in brick preparation: Solid waste management in tannery	132769
Li, Jingrong / Lu, Ye / Ma, Hongwei	Linear and nonlinear guided wave based debonding monitoring in CFRP-reinforced steel structures	132673
Singh, Harvinder / Siddique, Rafat	Long term durability assessment of self-compacting concrete made with crushed recycled glass and metakaolin	132656
Chen, Bowen / Zhang, Tirui / Geng, Yue / Wang, Qinghe / Zhao, Guoqing / Yang, Jinsheng	Longitudinal shear tests and design methods for corrugated steel–concrete composite slabs with recycled coarse aggregate	132870
Wang, S. Y. / Jin, L. / Feng, Y. / Wang, Z. Y. / Yin, T. Y. / Liu, K. N. / Dong, E. L. / Yu, R.	A low carbon embedded low water/binder cement-based composites (LW/BCC) based on steel slag powder and microwave pre-curing: Experiments and Life Cycle Assessment (LCA)	132778
Kakasor Ismael Jaf, Dilshad / Abdulrahman, Payam Ismael / Mohammed, Ahmed Salih / Kurda, Rawaz / Qaidi, Shaker M. A. / Asteris, Panagiotis G.	Machine learning techniques and multi-scale models to evaluate the impact of silicon dioxide (SiO2) and calcium oxide (CaO) in fly ash on the compressive strength of green concrete	132604
Reza Nadi Abiz, M. / Esfahani, M. Reza / Tanhadoust, Amin / Nehdi, Moncef L. / Mohammad Banijamali, S.	Magnesium nanoparticle modified cement-based composites: Performance and compatibility in repair applications	132781
Umesh, B.	Mechanical and durability properties of standard and high strength geopolymer concrete using particle packing theory	132722
Mahfoud, Elie / Maherzi, Walid / Ndiaye, Khadim / Benzerzour, Mahfoud / Aggoun, Salima / Abriak, Nor-Edine	Mechanical and microstructural properties of just add water geopolymer cement comprised of Thermo-Mechanicalsynthesis Sediments-Fly ash mix	132626
Pradhan, Shashwati Soumya / Mishra, Umesh / Biswal, Sushant Kumar	Mechanical and microstructural study of slag based alkali activated concrete incorporating RHA	132685
Li, T. Y. / Chen, J. Q. / Xiao, Y. / Zhang, J. / Shan, B. / Dai, S. Q. / Qin, S. J. / Huang, B.	Mechanical behavior of glued-in GFRP rod in glubam: Experimental and analytical study	132812
De Pascale, Beatrice / Tataranni, Piergiorgio / Lantieri, Claudio / Bonoli, Alessandra / Vignali, Valeria	Mechanical performance and environmental assessment of porous asphalt mixtures produced with EAF steel slags and RAP aggregates	132889
Wu, Jia-Qi / Lu, Zhanhui / Chen, Yung-Tsang / Ghiassi, Bahman / Shi, Weizhuo / Li, Bo	Mechanical properties and cracking behaviour of lightweight engineered geopolymer composites with fly ash cenospheres	132622
Borçato, Allan G. / Thiesen, Marisa / Medeiros-Junior, Ronaldo A.	Mechanical properties of metakaolin-based geopolymers modified with different contents of quarry dust waste	132854
Wang, Haiman / Ni, Wankui / Yuan, Kangze	Mechanical properties, microstructural evolution, and environmental impacts of recycled polypropylene fiber stabilized loess	132850
Zhao, Bing / Wang, Guangjin / Zhao, Kui / Wang, Menglai / Wu, Bisheng / Li, Shujian / Chen, Qinglin / Geng, Jiabo	Mechanical properties, permeability and microstructure of steam-cured fly ash mortar mixed with phosphogypsum	132582
Wang, Yang / Xiao, Hong / Nadakatti, Mahantesh M. / Wang, Xiaoyu / Fang, Shuwei	Mechanism of rail corrugation combined with friction self-excited vibration and wheel-track resonance	132782
Tavva, Tejaswini Lakshmi / Reddy, Kusam Sudhakar	A mechanistic-empirical approach to estimate the degree of Reclaimed Asphalt Pavement (RAP) bitumen activity	132912
Vallejos, Saúl / Trigo-López, Miriam / Sardon, Haritz / González-Martín, José Manuel / González-Moreno, Sara / García, José M.	Metal-free organocatalysts for high hydrolytic stability single component polyurethane adhesives and their application in decorative insulation facades manufacturing	132643
Yunlong, Zhang / Meizhu, Chen / Yuechao, Zhao / Shaopeng, Wu / Dongyu, Chen / Zhengxu, Gan / Yansong, Fan	Microencapsulated waste cooking oil derivatives for building thermoregulation	132644
Lu, Tong / Hofko, Bernhard / Sun, Daquan / Mirwald, Johannes / Eberhardsteiner, Lukas / Hu, Mingjun	Microscopic and rheologic characterization of third generation self-repairing microcapsule modified asphalt	132841
Yang, Shu / Liao, Bo / Liu, Tiancheng / Li, Tingyu	Microscopic R-curve simulation study of asphalt material fracture	132794
Xu, Huining / Zhan, He / Wang, Meng / Tan, Yiqiu	Microstructural characteristics evolution of asphalt mastics under cyclic environmental temperature variations	132795
Li, Wenxu / Xie, Youjun / Ma, Kunlin / Long, Guangcheng / Li, Ning / Jiang, Wei / Peng, Yiming	Microstructure characteristics and evolution of the bonding interface between SCC and steam-cured concrete	132837
Li, Jiangchuan / Zeng, Tian / Chang, Jun	Microstructure of Fe(OH)3 phase in hydration products of calcium sulfoaluminate cement	132609
Yang, Yuanyi / Li, Caiying / Li, Hui / Bai, Caoyuan / Wang, Zuowen / Yang, Tingting / Gu, Tao	Microwave-thermal-assisted curing method on geopolymer preparation from Panzhihua high-titanium slag by alkali activation	132614
Sharaky, I. A. / Seleem, M. H. / ELamary, Ahmed S.	Minimizing the crumb rubber effects on the flexural behaviour of the layered RC beams cast using rubberized concrete with or without recycled tire steel fibers	132503
Celebi, Erkan / Kırtel, Osman / İstegün, Berna / Goktepe, Fatih / Burhan Navdar, Muhammet / Subaşı, Ayşenur / Zülfikar, Abdullah Can	Mitigation of high-speed train induced surface vibrations by open trench with aerated concrete panel walls	132771
Zhu, Tianyu / Chen, Zhonghui / Zhang, Lingfei / Nian, Gengqian / Chen, Yanwei / Hao, Jianshuai	Modeling and fracture behavior of mesoscale concrete considering actual aggregate shapes and placement domain shapes	132821
Tian, Weiwei / Gao, Yingli / Li, Yuelin / Zhu, Juncai / Zhan, Mingtao / Wang, Shuo	Molecular dynamics study on the effect of rheological performance of asphalt with different plasticizers	132791
Liu, Qinlong / Lu, Wei / Zhu, Jing / Qi, Qinde / Li, Guangzhou / Li, Dongbo	Nano-scale mechanics of coarse-grained C-S-H with molecular dynamics	132494
Liu, Jianan / Yuan, Linjian / Wang, Zhenjun / Jing, Haosen / Shao, Tingquan / Chen, Hao	A new method for evaluating the uniformity of steel slag distribution in steel slag asphalt mixture based on deep learning	132766
Li, Yuang / Zhang, Wenhua / Sun, Guowen / Xiu, Yuxin / Zhang, Zixiang / Li, Chen / Zhang, Yunsheng	A new orientational molding method for ultra-high performance concrete with high content of steel fiber and investigation on its flexure and axial tensile properties	132755
Phung, Ba-Nhan / Le, Thanh-Hai / Nguyen, Thuy-Anh / Hoang, Huong-Giang Thi / Ly, Hai-Bang	Novel approaches to predict the Marshall parameters of basalt fiber asphalt concrete	132847
Wan, L. / Garcia-Hernández, A. / Cui, G. / Liu, P.	A novel performance-based method to design asphalt mixtures	132792
Hassan, Waqas / Alshameri, Badee / Haider, Abbas / Maqsood, Zain / Jamil, Syed Muhammad / Shahzad, Arfan	A novel technique for the construction industry to mitigate dispersibility and internal erosion problems of sodium rich clays by using Water-Soluble potassium rich ions material	132780
Liang, Minfei / Zhang, Yu / He, Shan / Chen, Yu / Schlangen, Erik / Savija, Branko	On the chemo-mechanical evolution process of high-volume slag cement paste	132891
Gacoin, A. / Li, A.	Optimal composition of a starch-hemp agro-composite materials	132711
Rosales, M. / Agrela, F. / Sánchez de Rojas, M. I. / Cabrera, M. / Rosales, J.	Optimisation of hybrid eco-efficient mortars with aggregates from construction and demolition waste and olive biomass ash	132634
Zhan, You / Luo, Zhiwei / Lin, Xiuquan / Nie, Zilong / Deng, Qiangsheng / Qiu, Yanjun / Wang, Tengfei	Pavement preventive maintenance decision-making for high antiwear and optimized skid resistance performance	132757
Wang, Shengwei / Yan, Ming / Wang, Qiang	PbCl2 effects on the strength and permeability of plastic concrete cutoff walls	132650
Morea, F. / Nosetti, R. / González, L. / Sánchez, A.	Performance analysis of non-conventional Stone Mastic asphalt (SMA) elaborated with crumb rubber bitumen or by mean of glass macrofibers addition	132654
Chen, Xuyong / Ai, Yangzheng / Wu, Qiaoyun / Cheng, Shukai / Wei, Yichen / Xu, Xiong / Fan, Tao	Potential use of nano calcium carbonate in polypropylene fiber reinforced recycled aggregate concrete: Microstructures and properties evaluation	132871
Zhang, Xueqing / Akber, Muhammad Zeshan / Poon, C. S. / Zheng, Wei	Predicting the 28-day compressive strength by mix proportions: Insights from a large number of observations of industrially produced concrete	132754
Dong, Shaoce / Wu, Xu / Qi, Xiao / Affolter, Christian / Terrasi, Giovanni P. / Xian, Guijun	Prediction model of long-term tensile strength of glass fiber reinforced polymer bars exposed to alkaline solution based on Bayesian optimized artificial neural network	132885
Fan, Congcong / Zheng, Yuanxun / Wang, Shaoqiang / Ma, Junjie	Prediction of bond strength of reinforced concrete structures based on feature selection and GWO-SVR model	132602
Wang, Ling / Zhou, Hao / Zhang, Junfei / Wang, Zixu / Zhang, Lei / Nehdi, Moncef L.	Prediction of concrete strength considering thermal damage using a modified strength-maturity model	132779
Bouras, Y. / Li, L.	Prediction of high-temperature creep in concrete using supervised machine learning algorithms	132828
Cai, Zhichao / Liu, Yunsheng / Liu, Xuehua / Zhang, Jing / Li, Tangbing / Xu, Bichuan	Prediction of interference current of buried pipeline and study on corrosion of Q235A steel	132739
Dan, Han-Cheng / Zhang, Zhi / Shan, Hongyu / Cao, Wei	Preliminary characterization on the dynamic mechanism of asphalt mixture under on-site vibratory compaction	132695
Yin, Kunpeng / Luo, Zhongtao / Liu, Xiaohai / Pan, Han / Zhi, Tianyi / Feng, Hu / Song, Yatao / Su, Yanfeng	Preparation and application of Na2SiO3@EC microcapsules for self-healing alkali-activated slag	132651
Jia, Jinpeng / Hu, Nanyan / Ye, Yicheng / Yao, Nan / Huang, Yang / Fu, Fanghui	Preparation of C/M−S−H cementitious materials from phosphate tailings and their dehydration and hydration mechanism	132865
Jin, Zihao / Cui, Chengjia / Wan, Ziheng / Su, Ying / He, Xingyang / Ma, Baoguo / Zhi, Zhenzhen / Chen, Shun / Wang, Bin	Preparation of eco-friendly functional lightweight gypsum: Effect of three different lightweight aggregates	132875
Fekadu Haile, Bezawit / Lifshitz Sherzer, Gili / Peterson, Karl / Grasselli, Giovanni	Progressive highly stressed volume for size effect analysis	132600
Devaraj, Vigneshkumar / Mangottiri, Vasudevan / Balu, Soundara	Prospects of sustainable geotechnical applications of manufactured sand slurry as controlled low strength material	132747
Mirwald, Johannes / Niszl, Christina / Eberhardsteiner, Lukas / Hofko, Bernhard	Quantifying the influence of heating and resting on the bitumen microstructure	132710
Im, Sumin / Liu, Junxing / Cho, Seongmin / Moon, Jaegeun / Park, Jaeyeon / Wi, Kwangwoo / Seok, Seungwook / Lim, Seungmin / Bae, Sungchul	Quantitative characterization of the interfacial transition zone around lightweight and normal aggregates in cement mortars at different water-to-binder ratios	132584
Ding, Jinghan / Yu, Jiakang / Zhu, Jinmeng / Zhang, Lianbing / Wang, Qi / Yang, Fan / Tian, Qing / Zhang, Chunyang / Zhao, Xichen / Dong, Wenqiang / Li, Xuanhua	Quaternary ammonium silane modified Nanolime for the consolidation and antifungal of stone relics	132605
Liu, Zixuan / Wang, Ping / Chen, Rong / Xu, Tengfei	Rapid evaluation of the high-speed railway bridge vertical deformation threshold and train operation safety performance based on the virtual track inspection method	132438
Lu, Jian-xin	Recent advances in high strength lightweight concrete: From development strategies to practical applications	132905
Bian, Zuwang / Lu, Jian-xin / Huang, Yujie / Xuan, Dongxing / Ou, Guangfeng / Poon, Chi Sun	Recycling of waste glass in lightweight geopolymer using incineration bottom ash as a foaming agent: Towards energy conservation	132632
Gigar, Firesenay Zerabruk / Khennane, Amar / Liow, Jong-leng / Tekle, Biruk Hailu / Katoozi, Elmira	Recycling timber waste into geopolymer cement bonded wood composites	132793
Liu, Jianlei / Yu, Zhumei / Zheng, Jie / Peng, Huanan / Zhang, Zhou / Ye, Hongde / Peng, Siyan / Lin, Xinmei / Duan, Wenjiu / Wang, Qikun	Red mud/silica sand tailing-derived glasses and glass-ceramics for architectural decoration: crystallization, structure, properties and immobilization of heavy metals	132873
Xu, Ning / Li, Ming / Fang, Saiyin / Huang, Changlin / Chen, Chumin / Zhao, Yue / Mao, Feilong / Deng, Tingting / Wang, Yuan	Research on the detection of the hole in wood based on acoustic emission frequency sweeping	132761
Luan, Yingcheng / Ma, Yuan / Ma, Tao / Wang, Chuanle / Xia, Fei	Research on the effects of asphalt performance on rutting resistance and its correlation with rutting performance indicators	132773
Elsayed, Mahmoud / Elmaaty, Mohamed Abou / Mohamed, Reem	Retrofitting of post-heated R.C. columns using steel fiber reinforced self-compacting concrete jackets	132637
Shilar, Fatheali A. / Ganachari, Sharanabasava V. / Patil, Veerabhadragouda B. / Bhojaraja, B. E. / Yunus Khan, T. M. / Almakayeel, Naif	A review of 3D printing of geopolymer composites for structural and functional applications	132869
Zhang, Dong / Bu, Wankui / Wang, Qingyuan / Liu, Pinpin / Shao, Zhuhai / Liu, Xingfei / Li, Guangyue / Zhou, Ying	A review of recent developments and challenges of using phase change materials for thermoregulation in asphalt pavements	132669
Song, Pengfei / Wang, Yuan / Wang, Xuhao / Wang, Yakun / Hou, Xin / Che, Junlin / Wang, Xin	Rheological behavior of basalt fiber sprayed cementitious composites (BFSCC)	132666
Suchismita, Arpita / Singh, Dharamveer	Rheological performance of bitumen mixed with laboratory simulated polymerized RAP binders	132706
Wang, Xinjie / Liu, Xiaolin / Wu, Yongkang / Zhu, Pinghua / Liu, Hui / Chen, Chunhong / Wang, Fajing	Road use and electrothermal performance of graphene-conductive asphalt-recycled pervious concrete under severe cold environment	132829
Fu, Changhao / Zhan, Qiwei / Zhang, Xuan / Zhou, Juanlan / Wu, Yang / Li, Xiaojin / Zhou, Pengcheng / Xu, Guangjin	Self-healing properties of cement-based materials in different matrix based on microbial mineralization coupled with bimetallic hydroxide	132686
Lou, Ping / Sun, Zhen	Service performance of CRTS II ballastless track in high temperature tunnel	132705
Klemczak, Barbara / Gołaszewski, Jacek / Smolana, Aneta / Gołaszewska, Małgorzata / Cygan, Grzegorz	Shrinkage behaviour of self-compacting concrete with a high volume of fly ash and slag experimental tests and analytical assessment	132608
Phiangphimai, Chattarika / Joinok, Gonganok / Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Damrongwiriyanupap, Nattapong / Sae-Long, Worathep / Sukontasukkul, Piti / Chindaprasirt, Prinya	Shrinkage, compressive and bond strengths of alkali activated/cement powder for alternative coating applications	132631
Caetano Hormidas Caldas, Pedro Henrique / Garcez de Azevedo, Afonso Rangel / Teixeira Marvila, Markssuel	Silica fume activated by NaOH and KOH in cement mortars: Rheological and mechanical study	132623
Addae, Daniel Twum / Rahman, Mujib / Abed, Ahmed	State of art literature review on the mechanical, functional and long-term performance of cold mix asphalt mixtures	132759
Liu, Gang / Qian, Zhendong / Wu, Xiaoyun / Zhang, Xiangfei	Stress responses analysis of asphalt mixture particles based on average principle during the rolling compaction process of weld SBDP	132805
Ye, Kai / Dasari, Aravind / Hooper, Thomas J. N.	Structural characterization and fire performance of geopolymer-glass fiber composite panels	132633
Chen, Long / Chen, Jingyun / Li, Mingliang / Li, Jun / Li, Yuhua	Study of fatigue performance of fiber reinforced high-viscosity asphalt mastic based on rheology	132784
Wang, Xinyan / Liu, Zhentao / Liu, Cheng / Wang, Liang / Chen, Mingxu / Yue, Gongbing	Study of mix design and performance of alkali-activated concrete with recycled concrete aggregate	132882
Wang, Huan / Liu, Quantao / Wu, Shaopeng / Lv, Yang / Wan, Pei / Gong, Xing / Liu, Gang	Study of synergistic effect of diatomite and modified attapulgite on reducing asphalt volatile organic compounds emission	132827
Liang, Meichen / Guo, Meng / Xu, Xiaoxiao / Liu, Xu / Liu, Hao / Bi, Yufeng	Study on accelerated aging rate of asphalt binder under multi-factors coupling conditions	132819
Yuan, Gaoang / Zhang, Jinliang / Ren, Ziming / Zhao, Zhenzhen	Study on compaction characteristics and mechanical performance deterioration of large stone porous asphalt mixes	132777
Menglu, Liu / Peng, Liu / Jun, Wu / Zhiwu, Yu / Ying, Chen / Xiang, Cheng	Study on improvement of waterproofing performance of CCCW with silicone waterproof material and waterbased capillary inorganic waterproofer	132842
Yang, Qingchun / Wu, Jiaming / Jiang, Jun / Li, Quanliang / Yu, Libo / Han, Zhengqi / Lu, Xiaolei / Ye, Zhengmao	Study on the composition and hydration properties at early stages of high-sodium Portland cement clinker under the synergistic effects of SO3	132696
Song, Qifeng / Deng, Shaoxiang / Ling, Tung-Chai	Study on the crushing strength improvement of artificial aggregates made with 100% solid wastes using polyvinyl alcohol solution	132576
Peng, Chao / Yang, Dongjin / Liu, Yafeng / You, Zhanping / Xu, Fang / Guan, Peiwen / Ruan, Di / Ning, Yunfei / Ye, Zhile	Study on the effect of carbon nanotubes on the properties of wasted engine oil recycled asphalt binder	132800
Bi, Yutao / Yang, Caiqian / Zhu, Fawang / Chen, Jun / Pan, Yong	Study on the freeze–thaw cycles and carbonization of ultra-high molecular weight polyethylene fiber reinforced engineered cementitious composite for link slab	132371
Lu, Xiang / Wang, Liang / Chen, Chen / Chen, Jiankang / Zhou, Jingren / Deng, Jun	Study on the influence mechanism of material damage on the cavitation erosion properties of hydraulic concrete	132849
Li, Menglin / Xie, Jun / Wu, Shaopeng / Chen, Junlin	Study on the influence mechanism of recycled concrete aggregate on strength of asphalt mixtures	132720
Qin, Lei / Wang, Haibo / Zhao, Chong / Chu, Xuanxuan / Shi, Feifan / Guo, Chengchao / Wang, Fuming	Study on the interface damage of CRTS II track slab under high- and low-temperature cycles based on acoustic emission	132742
Xu, Xuefeng / Cui, Sheng'ai / Cao, Zhuoying / Zhang, Shuhao / Ju, Jiann-wen Woody / Liu, Pin / Wang, Xuewei	Study on the interfacial bonding performance of basalt ultra-high performance concrete repair and reinforcement materials under severe service environment	132624
Li, Kang / Xie, Xiongyao / Huang, Changfu / Zhou, Biao / Duan, Weiwei / Lin, Honglin / Wang, Cheng	Study on the penetration capability of GPR for the steel-fibre reinforced concrete (SFRC) segment based on numerical simulations and model test	132719
Zhang, Xijun / Du, Mingrui / Fang, Hongyuan / Li, Bin / Zhao, Peng / Zhai, Kejie / Yao, Xupei / Du, Xueming / Shi, Mingsheng / Ma, Duo	Study on the shear strength and damage constitutive model of the contact surface between PVA fiber-enhanced cement mortar and concrete	132571
Li, Xuezhong / Li, Zhuguo	Surface treatment of inorganic modifier for improving carbonation resistance of geopolymers	132748
Luan, Congqi / Wang, Jinbang / Zhou, Zonghui	Synergic effect of triethanolamine and C-S-H seeding on early hydration of the limestone calcined clay cement in UHPC	132675
Ren, Zhisheng / Wang, Lu / Wang, Hao / Gao, Fuhao / Liu, Shuhua / Ren, Jun	Synergistic solidification/stabilization mechanism of cadmium in phosphogypsum slag-based cementitious material	132802
Shi, Tao / Lou, Ping	Time-variant reliability of interlayer damage of CRTS-II slab track by combining the second-order fourth-moment and outcrossing method	132790
Xiao, Lei / Xue, Xuanyi / Wang, Neng / Ren, Qiubing / Hua, Jianmin / Wang, Fei	A transfer learning-based approach to fatigue life prediction of corroded bimetallic steel bars using small samples	132679
Xiao, Xiong / Li, Quanwang	Two-stage deterioration model updating of RC structures in marine environment using long-term field inspection data	132817
Gu, Meixiang / Cai, Xiaocong / Mo, Haizhao / Wang, Qing	Unconfined compressive behavior of column with geogrid-encased recycled aggregate: Test and simulation	132528
Qasrawi, Hisham	The use of NDT to evaluate maturity for taking off formwork under hot curing	132437
Hamdi, Oualid Mahieddine / Ahmed-Chaouch, Ali / Saidani, Messaoud / Alioui, Hichem	Use of the Algerian natural pozzolan for the production of a geopolymer as a complete cement replacement	132723
Seitllari, Aksel / Boz, Ilker / Habbouche, Jhony / Diefenderfer, Stacey D.	Using mechanistic–empirical based analysis to evaluate rutting performance thresholds for balanced mix design tests	132762
Dinç-Şengönül, Burcu / Yuzer, Nabi / Boylu, Selen / Erdil, Kemal / Güdendede, Yahya Aykut	Utilization of waste animal blood as an additive in hydraulic lime-based mortars	132909
Yang, Jianhua / Zhang, Zhengqi / Xue, Jinshun / Lei, Jun'an / Liu, Yong / Wang, Yuanyuan / Fang, Ying	Variation and mechanism of asphalt-aggregate interface features under ultraviolet aging based on meso- and micro-observations	132830
Moula, Soufien / Ben Fraj, Amor / Wattez, Thomas / Bouasker, Marwen / Bel Hadj Ali, Nizar	The very early-age behaviour of Ultra-High Performance Concrete containing ground granulated blast furnace slag	132630
Tan, Zhifei / Jelagin, Denis / Fadil, Hassan / Leng, Zhen / Li, Rui / Jiang, Jiwang / Cao, Peng	Virtual-specimen modeling of aggregate contact effects on asphalt concrete	132638
Trussell, Nicholas / Øystein Nordtug, Per / Asadi, Iman / Kristoffersen, Martin / Jacobsen, Stefan	Water transport in cracks controlled by digital image correlation in wet sprayed concrete with and without an EVA based co-polymer admixture	132423

Über diese
Datenseite
IssueID
70425
Veröffentlicht am:
03.09.2023
Geändert am:
03.09.2023

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.