Journal of Building Pathology and Rehabilitation - v. 7, n. 1 (November 2021)

Erschienen:	November 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Weldetsadik, Elshadai Baja / Hirbaye, Conno Bodde	Access to low-cost house by optimizing local building materials in Mekelle City, Northern Ethiopia
Bibang Bi Obam Assoumou, Stahel Serano / Li, Zhu	Achieving energy efficiency and thermal comfort through passive strategies and renewable technology. Wuhai demonstration center project as an application case
Bouallaga, Ishak / Abed, Mohamed / Kenai, Said	Analysing concrete quality in some Algerian construction sites by data structuring
Baviskar, Shrikant / Dwivedi, Arunkumar / Patil, Hiteshkumar	Analysis and development of the Composite Sustainable Condition Index for elevated service reservoir (ESR) by DER method
Kumar, M. Vinod / Alzein, Razan / Chithambar Ganesh, A. / Rajesh Kumar, K. / Gurumoorthy, N. / Adesina, Adeyemi	Analytical investigation of the influence of various void shape and spacing on the load-bearing behavior of concrete hollow core slabs
Vijay, Kunamineni / Murmu, Meena	Application of artificial neural networks for prediction of microbial concrete compressive strength
Debroy, Sudipta / Sil, Arjun	An apposite transfer-learned DCNN model for prediction of structural surface cracks under optimal threshold for class-imbalanced data
Şeker, Burçin Şenol / Farsangi, Ehsan Noroozinejad / Özkaynak, Merve	Assessment of Structural Performance of a historical Mosque under Static and dynamic loads: Burmali Mosque in Amasya, Turkey
Lisci, Carla / Sitzia, Fabio / Pires, Vera / Mirão, José	Building stones durability by UVA radiation, moisture and spray accelerated weathering
Mazumder, Endow Ayar / Prasad M., L. V.	Characterisation of eco-friendly self-compacting geopolymer concrete for fire endurance properties
Arnaud, Kouamou Nguessi / Bock, Christian Hyeng / Emmanuel, Yamb / Billong, Ndigui	Characterization of cementitious mortar with addition of fibers from waste paper
Suriya, Pa. / Sangeetha, S. P.	Characterization of Geobacillus stearothermophilus and its application in soil stabilization
Garcez de Azevedo, Afonso Rangel / Teixeira Marvila, Markssuel / Tayeh, Bassam / Souza, Jéssica / Teixeira, Silvio Rainho	Characterization of mortars on the facade of buildings in Gaza-Palestine using experimental techniques
Banchhor, Sonal / Murmu, Meena / Deo, Shirish V.	Combined effect of fly-ash and GGBS on performance of alkali activated concrete
Solanki, Sushil Kumar / Paul, V. K.	Comparison between service life prediction methods for building rehabilitation: application on a case study
Patil, Supriya M. / Kasthurba, A. K. / Patil, Mahesh V.	Damage assessment through petrographic and microscopic studies of stone monuments
Olanrewaju, AbdulLateef / Tee, Shao Han / Lim, Poh Im / Wong, Wai Fang	Defect management of hospital buildings
Satish, Batta Jaya Naga / Venkatesh, Chava / Reddy, B. Anitha / Reddy, Komma Hemanth Kumar / Bellum, Ramamohana Reddy	Design optimization of non-overflow section of a concrete gravity dam
Vaishnavi, J. Krishna / Murali Krishna, B.	Determination of response of multistorey structure subjected to blast loading
Karri, Santosh Kumar / Ponnada, Markandeya Raju / Veerni, Lakshmi	Development of eco-friendly GGBS and SF based alkali-activated mortar with quartz sand
Pavel, Florin / Farsangi, Ehsan Noroozinejad / Bizon, Florin	Development of empirical models for reinforced concrete flat-slab structures using experimental results
Sharma, Anurag / Tripathi, R. K. / Bhat, Govardhan	Direct-displacement and force-based seismic assessment of RC frame structures
Salamoni, Natália / Rohden, Abrahão Bernardo	Durability analysis of concrete foundations exposed to external sulfate attacks in the south of Santa Catarina, Brazil
Pogaku, Poojitha / Bommisetty, Jagadeesh	Effect of corrosion on residual flexural capacity of corroded RCC members of standard grades
Saberi, Hamid / Saberi, Vahid / Khodamoradi, Negar / Pouraminian, Majid / Sadeghi, Abbasali	Effect of detailing on performance of steel T-connection under fire loading
Silva Neto, Gilberto Alves da / do Prado, Dyala Fraga / Bezerra, Augusto Cesar da Silva / dos Santos, White Jose / Gumieri, Adriana Guerra	Effect of different fine recycled aggregates and superplasticizer on microconcretes’ performance
Das, Manita	Effect of load transferring platform on micropile
Azhar, Nur Ain Syafawanie Mat / Hashim, Nor Hafida / Muhd Sidek, Muhd Norhasri / Halim, Nur Adila Izati Abdul / Newman, Aidan / Fauzi, Mohd Afiq Mohd	Effect of low inclusion of palm oil fuel ash (POFA) as a partially sand replacement to the performance of mortar
Gade, Venkata Ramanjaneyulu / Rao, P. Subba / Asadi, SS.	Effect of material properties on thermal equivalence of shear stress in the presence of interfacial crack using finite element method
Vengala, Jagadish / Dharek, Manish S. / Reddy, S. Ganeshwar / Mohammad, Misbahuddin	The effect of roof overlay on thermal comfort behaviour of reduced scaled building models in tropical climate: an Indian case study
Nayak, Dipti Ranjan / Pattnaik, Rashmi R. / Panda, Bikash Ch.	Effect of shrinkage on slant shear and flexure bond strength of cement based micro-concrete for durable concrete repair
Bellum, Ramamohana Reddy / Al Khazaleh, Mahmoud / Pilla, Ravi Kishore / Choudhary, Sumit / Venkatesh, Chava	Effect of slag on strength, durability and microstructural characteristics of fly ash-based geopolymer concrete
Manthena, Sri Lakshmi / Boddepalli, Krishna Rao	Effect of tile aggregate and flyash on durability and mechanical properties of self-compacting concrete
Senthilkumar, Shivani / Ayyathurai, Vignesh	Energy efficiency management and setpoints optimisation strategy in retail store building, India
Van Essa Kamga Samen, Liliane / Yanou, Rachel Nkwaju / Monguen, Cédric Karel Fonzeu / Lenwoue, Arnaud Régis Kamgue / Bruno Tchamba, Arlin / Gnamisi, Guy Molay Tchapga / Yang, Liuhua / Mempouo, Blaise	Engineering properties of soda-lime glass powder on Portland cement CEM IV-B-L mortar
Vijay, Kunamineni / Murmu, Meena	Evaluating durability parameters of concrete containing bacteria and basalt fiber
Akindahunsi, A. A. / Ogune, C. N. / Ayodele, A. L. / Fajobi, A. B. / Olajumoke, A. M.	Evaluation of the performance of corncob ash in cement mortars
Adhikari, Prakash Bahadur / Chaulagain, Hemchandra	Experimental characterization of Rat trap and traditional English bond used in masonry structures in Nepal
Ramasubramani, R. / Rajeshkumar, M.	Experimental impacts of removing cover concrete from a coconut shell reinforced concrete beam
Alla, Suseela / Asadi, S. S.	Experimental investigation and microstructural behavior of un-calcined and calcined snail shell powder cement mortar
Chaitanya, Bypaneni Krishna / Sivakumar, Ilango	Experimental investigation on bond behaviour, durability and microstructural analysis of self-compacting concrete using waste copper slag
Swathi, Vennam / Asadi, SS.	An experimental investigation on mechanical, durability and Microstructural Properties of high-volume fly ash based concrete
Reddy, K. Chandrasekhar	Experimental investigation on mechanical, durable and stress–strain behaviour of hybrid reinforced concrete admixed BC soil: a novel use of waste fibers to reduce disposal challenges
Bhat, Aabid Hussain / Naqash, Javed Ahmed	Experimental studies of sustainable concrete modified with colloidal nanosilica and metakaolin
Nadi, Sara / Beheshti Nezhad, Hossein / Sadeghi, Abbasali	Experimental study on the durability and mechanical properties of concrete with crumb rubber
Kanani, Kirtan / Gupta, Aditya Kumar / Patel, Sanjay Kumar / Bade, Mukund Haribhau	Exploration of climate zones based on hierarchal clustering algorithm for buildings in India
Karumanchi, Meeravali / Ruben, Nerella / Mikkili, Indira	Extraction and microstructural characteristics of nanosilica from cultivated agricultural wastes
Ramasubramani, R. / Nareshbabu, A. / Sudarsan, J. S. / Nithiyanantham, S.	Feasibility of cockle seashell waste as an additive material to concrete as a green concrete initiative to promote sustainability
Padmapriya, R. / Sudarsan, J. S. / Nithiyanantham, S.	Formation of high strength concrete through sustainable waste materials as a partial replacement of cement
Sadeghi, Abbasali / Kazemi, Hamid / Mehdizadeh, Kourosh / Jadali, Fatemeh	Fragility analysis of steel moment-resisting frames subjected to impact actions
Che Ani, Adi Irfan / Tawil, Norngainy Mohd / Mohammad, Noraziah / Mahmood, Nor Haliza	Has the advent of green office buildings influenced the rental depreciation of conventional office buildings? A case study in the Kuala Lumpur Golden Triangle
Eshetu, Elshaday / Wondimu, Temesgen / Patnaik, Binaya / Harguy, Berke	Healing concrete crack by using bacteria
Shridhar, S. T. / Amalkar, Manjunath S. / Ihtesham, Mohammed / Basutkar, S. M. / Renukadevi, M. V.	The implication of using filtered sand in mortar and concrete
Malathy, R. B. / Bhat, Govardhan / Dewangan, U. K.	An improved iterative technique for inelastic time history analysis of single degree of freedom (SDOF) elasto-plastic system
Diddi, Pavan Kumar / Sharma, Pushpendra K. / Srivastava, Amit / Madduru, Sri Rama Chand / Reddy, E. Sreenivas	Influence of blends of alkali resistant fibres and polypropylene fibres on fresh and hardened properties of early strength self compacting concrete
Karumanchi, Meeravali / Nerella, Ruben	Influence of extracted nanosilica on geotechnical properties of soft-clay soil subjected to freeze-thaw cycles
Priyanka, Mukkala / Muniraj, Karthikeyan / Madduru, Sri Rama Chand	Influence of geopolymer aggregates on micro-structural and durability characteristics of OPC concrete
Silva, Yvis J. / Paulo, Renan N. / Sousa, Israel N. L. / Vieira, Mylene M. / Mesquita, Esequiel F. T.	Integrated approach based on non-destructive technique and numerical simulation for assessment of corrosion in bridge
Nataraja, M. C. / Bhat, Govardhan / Manoj, M. / Mallya, Sanjay	Investigation on concrete with crushed vitrified tiles as coarse aggregates
Cici Jennifer Raj, J. / Kumar, M. Vinod	Investigation on sand-tyre mix base isolation system subjected to static loading
Athibaranan, S. / Karthikeyan, J. / Rawat, Shraddha	Investigation on service life prediction models of reinforced concrete structures exposed to chloride laden environment
Reddy, P. V. R. K. / Prasad, D. Ravi	Investigation on the impact of graphene oxide on microstructure and mechanical behaviour of concrete
Biswas, Surajit / Mandal, Saroj	Mechanical and micro-structural study of cement mortar with graphene oxide
Turkane, Sagar D. / Chouksey, Sandeep K.	Mechanical performance and stability analysis of moorum embankment partially replaced with fly ash
Shanmugasundaram, N. / Praveenkumar, S.	Mechanical properties of engineered cementitious composites (ECC) incorporating different mineral admixtures and fibre: a review
Sriram, M. / Sidhaarth, K. R. Aswin	Mechanical properties of ramie fibers and hooked-end steel fibers reinforced high strength concrete incorporating metakaolin and silica fume
Bharathi, K. P. P. / Adari, S. K. / Pallepamula, Urmila	Mechanical properties of self-compacting concrete using steel slag and glass powder
Sam-Tunsa Alarba, Albertine / Epey, Noela / Nana, Achile / Tome, Sylvain / Mache, Jacques Richard / Nchare, Mominou	Mineralogical and physicochemical characterization of clayey materials from Meiganga (Adamawa-Cameroon): potential application in traditional ceramic
Camanducaia, Laura P. M. / Santos, Nathalia C. S. / Medeiros-Junior, Ronaldo A.	Mitigation potential of sulfate-resistant Portland cement for internal sulfate attack
Bennamoun, Lyes / Ndukwu, Macmanus Chinenye	Modeling and simulation of drying kinetics/curves: application to building materials
Pouraminian, Majid	Multi-hazard reliability assessment of historical brick minarets
Li, Zhengqi	A new method of estimating equivalent specified compressive strength of existing concrete based on probabilistic modeling of pullout test
Celik, Huseyin Kursat / Sakar, Gokhan	A new study on the live load arrangements in RC buildings
Cici Jennifer Raj, J. / Kumar, M. Vinod	Nonlinear Modal Time History Analysis on RC framed buildings with scrap tyre as the base isolator for Past Indian earthquakes
Ebadi-Jamkhaneh, Mehdi / Kontoni, Denise-Penelope N.	Numerical finite element investigation of thin steel shear walls retrofitted with CFRP layers under reversed cyclic loading
Ponnada, Markandeya Raju / Geddada, Yesuratnam	Numerical nonlinear modeling and simulations of high strength reinforced concrete beams using ANSYS
Ranjithkumar, Madheswaran / Punitha Kumar, Akhas	Numerical study on lateral torsional buckling of coped beams
Turkane, Sagar D. / Chouksey, Sandeep K.	Optimization of fly ash geopolymer dosage for California bearing ratio using response surface method
Sitzia, Fabio / Beltrame, Massimo / Mirão, José	The particle-size distribution of concrete and mortar aggregates by image analysis
Ram Kumar, B. A. V. / Ramakrishna, G.	Performance evaluation of sustainable materials in roller compacted concrete pavements: a state of art review
Singh, Guljit / Tomar, Anshu / Kanwar, Varinder Singh	Physical, mechanical and crystallographic properties of clay bricks and mortars of the sixteenth–nineteenth century monuments of East Punjab
Ouacha, H. / Ben Moussa, A. / Simao, J. / El Kharim, Y. / Baghdad, B.	Physico-chemical properties and alteration of Lixus historical monuments building rocks (Larache–Morocco)
Madupu, L. N. K. Sai / Sai Ram, K. S.	Prediction of load carrying capacity of axially loaded short RC column strengthened with GFRP strips
Patil, Hiteshkumar / Dwivedi, Arunkumar / Bidkar, Kisan	Prediction of upgraded properties of the concrete with the wash sand waste
Cappellesso, Vanessa Giaretton / dos Santos Petry, Natália / Longhi, Márlon Augusto / Masuero, Angela Borges / Dal Molin, Denise Carpena Coitinho	Reduction of concrete permeability using admixtures or surface treatments
Kiran, K. K. / Farsangi, Ehsan Noroozinejad / Gharehbaghi, Vahidreza / Bogdanovic, Aleksandra	Rehabilitation of SDOF systems under air blast loading with a modified negative stiffness amplifying damper
Alshaikh, Ibrahim M. H. / Zeyad, Abdullah. M.	Reliability of the tests’ results of Schmidt Hammer and core cutting for assessing actual compressive strength of concrete
Eranki, Bhargavi / Malasani, Potharaju	Residual load carrying capacity of un-stressed RC columns under fire
Campos, Vanessa Ribeiro / Moreira, Delcia Janine Sequeira	Risk assessment with multi-attribute utility theory for building projects
Bahreini, Vahid / Pouraminian, Majid / Tabaroei, Abdollah	Seismic sensitivity analysis of Musa Palas historic masonry arch bridge by Tornado diagram
de Morais, Sabrina Câmara / Lordsleem Júnior, Alberto Casado / Aquino Rocha, Joaquin Humberto / Lopes Silva, Júlio / Póvoas, Yeda Vieira	Stabilized mortar: property evaluation according to stabilization time
Solanki, DivyarajSinh / Kangda, Muhammed Zain / Sarur, Shubham / Farsangi, Ehsan Noroozinejad	A state-of-the-art review on the experimental investigations of bendable concrete
Kandasamy, Selvaraj / Gowthaman, Mani / Gowdhamramkarthik, Palanisamy / Raman, Jagajeevanram Vengadesh Marshall / Magenthiran, Balakrishnan	Strength and durability performance of concrete cast using permeable formwork liner
Sangeetha, S. P. / Subathra, P. / Divahar, R. / Aravind Raj, P. S.	Strength and light transmitting characteristics of translucent concrete using plastic optic fibers
Rizvon, Shamili Syed / Jayakumar, Karthikeyan	Strength prediction models for recycled aggregate concrete using Random Forests, ANN and LASSO
Benabderrazik, Mohamed / Benmakhlouf, Mohamed / Morarech, Moad	Structural expertise of the Perdicaris castle within the context of assessment and rehabilitation of historical masonry buildings in Morocco
Tamboli, Amena I. / Sohoni, Vidula Shiram	A study on recent advances in phase change material and its experimental assessments in masonry construction technology
Kashyap, Rishabh / Saxena, Mukul / Gautam, Arstu / Chauhan, Saurabh / Mourya, Abhishek / Verma, Priya	A study on recycled lightweight aggregate concrete
Rath, Badrinarayan / Dereje, Bewiket / Garoma, Shiferaw / Kebede, Kassahun / Misgana, Dabala / Gutema, Endalkachew Mosisa	A study on structural behaviour of CFRP laminated concrete beam with partial replacement of fine aggregate by PET granules
Hasannejad, Morteza / Berenjian, Javad / Pouraminian, Majid / Sadeghi Larijani, Ali	Studying of microstructure, interface transition zone and ultrasonic wave velocity of high strength concrete by different aggregates
Dhadse, Gaurav D. / Ramtekkar, G. D. / Bhatt, Govardhan	Thin layer interface: an alternative to zero thickness interface for modeling of footing-soil interaction system
Dodo, Etone Macka Alexandre / Yannick, Ondoua Abondo Ebengue / Lionel, Ntamag Jacques / Soualiou, Njimbouombouo Mouliom / Duna, Linda Lekuna / Myllyam, Beleuk A. Moungam Lynn / Robert, Medjo Eko / Seba Minsili, Lezin / Billong, Ndigui	The viability of calcined clays and volcanic scoria from western Cameroon as Supplementary Cementitious Material (SCM)

Über diese
Datenseite
IssueID
59962
Veröffentlicht am:
30.11.2021
Geändert am:
30.11.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Pathology and Rehabilitation - v. 7, n. 1 (November 2021)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Pathology and Rehabilitation - v. 7, n. 1 (November 2021)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.